EN 13407:2006

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Wall-hung urinals - Functional requirements and test methodsZidni pisoar – Funkcionalne zahteve
in preskusne metodeUrinoirs muraux - Prescriptions fonctionnelles et méthodes d'essaiWandhängende Urinale - Funktionsanforderungen und PrüfverfahrenTa slovenski standard je istoveten z:EN 13407:2006SIST EN 13407:2007en91.140.70Sanitarne napraveSanitary installationsICS:SLOVENSKI
STANDARDSIST EN 13407:200701-januar-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13407October 2006ICS 91.140.70 English VersionWall-hung urinals - Functional requirements and test methodsUrinoirs muraux - Prescriptions fonctionnelles et méthodesd'essaiWandhängende Urinale - Funktionsanforderungen undPrüfverfahrenThis European Standard was approved by CEN on 28 August 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13407:2006: E

Test rig for urinals intended to be flushed by a flush valve.17 Annex B (normative)
Test rig for urinals intended to be flushed by a manually operated flushing cistern.19 Annex C (normative)
Test rig for urinals intended to be flushed by an automatic flushing cistern with valve-less outlet device.23

Clauses of this European Standard addressing the provisions of EU Construction Products Directive.25 Bibliography.29

Figure 1 — Wall-hung urinal 3.2 slab urinal sanitary appliance comprising a floor channel and a slab or sheet fixed to a wall, for receiving urine and water used for flushing and directing both into a drainage system (see Figure 2)
Figure 2 — Slab urinal
Figure 3 — Stall urinal 3.4 urinal with siphonic action urinal in which urine is removed by siphonage (suction) induced by flushing water flowing through either an integral trap or a dedicated separate trap assembled in accordance with the manufacturer's instruction 3.5 wash-down urinal non-siphonic acting urinal with or without integral trap 3.6 waterless urinal sanitary appliance for receiving urine and directing it into a drainage system, which functions without the use of water 3.7 flushing cistern cistern for storage and discharge of a defined volume of flushing water for removal of urine from urinals 3.8 flush valve valve connected directly to a water supply, which delivers a pre-determined volume of flushing water for removal of urine from a urinal 3.9 cleanability characteristics which allow surfaces intended to come into contact with water and/or urine and cleansing materials to be visibly smooth, non-absorbent and free from acute internal corners, such that they can be kept visibly free from dirt and/or stains when subject to a regular maintenance regime, which may include, when appropriate, specific instructions for use and care specified by the manufacturer 4 Principles of design 4.1 General Wall-hung urinals in accordance with Table 1 shall meet the following requirements:  for connection to supply and drainage systems the connecting dimensions shall be in accordance with EN 80 or the manufacturer shall provide or recommend necessary auxiliary components;  wall-hung urinals shall function with flushing device(s) supplying flushing volumes and/or flow rates as specified by the manufacturer in accordance with Table 2.

Table 1 — Types of wall-hung urinals Type Construction I Siphonic action urinal with flushing rim and with integral trap or with dedicated trap specified by the manufacturer II Wash-down urinal with or without flushing rim and with integral trap or with dedicated trap specified by the manufacturer III Wash-down urinal with or without flushing rim and without dedicated trap IV Urinal of type I, II or III with dedicated flushing device specified by the manufacturer
4.2 Flushing volume and flow rate The flushing volumes and flow rates for particular flushing devices shall be as given in Table 2. Table 2 — Flushing devices, volumes and flow rate
Flushing device for testing Type of urinal Flush valve (C) in accordance with Annex A Manually operated flushing cistern (A) in accordance with Annex B Automatic flushing cistern (B) in accordance with Annex C
Flushing volume l Flow rate l/s Flushing volume l Flushing volume l I
0,50,10,2+−
II > 0,5 ≤ 5,0 0,22,01,0+− > 0,5 ≤ 5,0 — III
≤ 0,2
> 0,5 ≤ 4.5 IV
0,51,04,0+−
5 Classification Wall-hung urinals are classified as described below: Class 1 : Wall-hung urinals intended to be installed in drainage systems of type I, II or IV in accordance with EN 12056-2 and tested in accordance with Clause 6. Class 2 : Wall-hung urinals intended to be installed in drainage systems of type III in accordance with EN 12056-2 and tested in accordance with Clause 7.

Key 1 spreader or central inlet hole 2 surface to be tested Figure 4 — Surface to be tested for urinals without flushing rim flushed by a spreader or inlet holes 6.2.2 Flushing of three plastics balls When tested as described in 6.6.1.3.2, at least two plastics balls shall be flushed out of the trap of the urinal in each of five separate flushing operations with three balls.

Figure 5 — Template for testing urinals without flushing rim 6.6.1.3.1.2 Test material 20 g of fine dry wood sawdust. 6.6.1.3.1.3 Method For urinals without rim draw the perimeter of the surface to be tested (see Figure 4) using the template and a water resistant ink. Moisten the surface to be tested of all types of urinals. Immediately afterwards, sprinkle the sawdust as completely and evenly as possible over the moistened surface. Flush the urinal with the flushing volume and/or flow rate indicated by the manufacturer and measure any
un-flushed area of the surface to be tested. Perform this procedure five times and check the compliance with 6.2.1. 6.6.1.3.2 Flushing of three plastics balls 6.6.1.3.2.1 Test material Three balls of non-absorbent material, e.g. polyethylene, each having a mass of (3,7 ± 0,2) g and a diameter of (20 ± 0,2) mm1). 6.6.1.3.2.2 Method For each flushing operation place the three balls into the urinal. Without the urinal being connected to a drainage pipe, flush the urinal with the flushing volume and/or flow rate specified by the manufacturer. Verify that the balls are flushed out of the trap of the urinal. Remove any balls left in the urinal or its trap.
1) Suitable balls are available from Fa. Gebauer GmbH, Kugelfabrik, P.O. Box 425, 36004 Fulda, Germany or CIMAP, Avenue Paul Adam 21 - 25 75017 Paris, France. This information is given for the convenience of users of this European Standard and does not constitute an endorsement by CEN of these products.
...