EN 12308:1998
(Main)Installations and equipment for LNG - Suitability testing of gaskets designed for flanged joints used on LNG piping
Installations and equipment for LNG - Suitability testing of gaskets designed for flanged joints used on LNG piping
This European Standard defines the tests to be carried out in order to assess the suitability of gaskets designed for flanged joints used on LNG pipes. This European Standard is applicable for gaskets with: - nominal pressure range from PN 16 to PN 100; - nominal diameter range from DN 10 to DN 1000; - class range from Class 150 to Class 900; - nominal diameter range for Class flanges from NPS 1/4 to NPS 42.
Anlagen und Ausrüstung für Flüssigerdgas - Eignungsprüfung von Flachdichtungen für Flanschverbindungen in Flüssigerdgas-Rohrleitungen
Diese Norm legt die Prüfungen fest, die durchgeführt werden, um die Eignung von Flachdichtungen für Flanschverbindungen in Flüssigerdgas-Rohrleitungen zu bewerten. Diese Europäische Norm gilt für Dichtungen mit: - einem Nenndruck von PN 16 bis PN 100; - einem Nenndurchmesser von DN 10 bis DN 1000; - einem Klassenbereich von Klasse 150 bis Klasse 900; - einem Nenndurchmesserbereich für klassifizierte Flansche von NPS 1/4 bis NPS 42.
Installations et équipements relatifs au GNL - Essais d'aptitude à l'emploi des joints destinés aux assemblages par brides des tuyauteries GNL
La présente norme européenne spécifie les essais réalisés afin d'évaluer l'aptitude à l'emploi des joints destinés aux assemblages par brides utilisés sur des tuyauteries dans lesquelles transite le GNL. La présente norme européenne est applicalble aux joints dont: - la gamme de pression nominale s'étend de PN 16 au PN 100; - la gamme de diamètre nominal s'étend de DN 10 à DN 1000; - la gamme de Class s'étend de Class 150 à Class 900; - la gamme de diamètre nominal pour les brides définies par un numéro de Class s'étend de NPS 1/4 à NPS 42.
Napeljave in oprema za utekočinjeni zemeljski plin – Preskušanje ustreznosti tesnil za prirobnične spoje na cevovodih za utekočinjeni zemeljski plin
General Information
- Status
- Withdrawn
- Publication Date
- 16-Jun-1998
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 282 - Installation and equipment for LNG
- Drafting Committee
- CEN/TC 282 - Installation and equipment for LNG
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 06-Dec-2017
- Completion Date
- 21-Jan-2026
Relations
- Effective Date
- 28-Jan-2026
- Refers
EN 1333:2006 - Flanges and their joints - Pipework components - Definition and selection of PN - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
ABS Group Brazil
ABS Group certification services in Brazil.
Bureau Veritas Kuwait
Bureau Veritas certification services in Kuwait.
Bureau Veritas Nigeria
Bureau Veritas certification services in Nigeria.
Sponsored listings
Frequently Asked Questions
EN 12308:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Installations and equipment for LNG - Suitability testing of gaskets designed for flanged joints used on LNG piping". This standard covers: This European Standard defines the tests to be carried out in order to assess the suitability of gaskets designed for flanged joints used on LNG pipes. This European Standard is applicable for gaskets with: - nominal pressure range from PN 16 to PN 100; - nominal diameter range from DN 10 to DN 1000; - class range from Class 150 to Class 900; - nominal diameter range for Class flanges from NPS 1/4 to NPS 42.
This European Standard defines the tests to be carried out in order to assess the suitability of gaskets designed for flanged joints used on LNG pipes. This European Standard is applicable for gaskets with: - nominal pressure range from PN 16 to PN 100; - nominal diameter range from DN 10 to DN 1000; - class range from Class 150 to Class 900; - nominal diameter range for Class flanges from NPS 1/4 to NPS 42.
EN 12308:1998 is classified under the following ICS (International Classification for Standards) categories: 23.040.80 - Seals for pipe and hose assemblies; 75.200 - Petroleum products and natural gas handling equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12308:1998 has the following relationships with other standards: It is inter standard links to EN 1515-1:1999, EN 1333:2006, EN 1515-2:2001, EN ISO 16903:2015, EN ISO 6708:1995, EN 1514-4:1997, EN 1514-3:1997, EN 1473:2007, EN 1473:2016, EN 1474-1:2008. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12308:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.XVWUH]QRVWLAnlagen und Ausrüstung für Flüssigerdgas - Eignungsprüfung von Flachdichtungen für Flanschverbindungen in Flüssigerdgas-RohrleitungenInstallations et équipements relatifs au GNL - Essais d'aptitude a l'emploi des joints destinés aux assemblages par brides des tuyauteries GNLInstallations and equipment for LNG - Suitability testing of gaskets designed for flanged joints used on LNG piping83.140.50TesnilaSeals75.200Petroleum products and natural gas handl
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...