EN 14317-1:2004

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installationToplotnoizolacijski proizvodi za stavbe - Proizvodi iz razplastenega vermikulita (EV), oblikovani na mestu vgradnje - 1. del: Specifikacija za vezane in razsute proizvode pred vgradnjoProduits isolants thermiques pour le bâtiment - Produits d'isolation thermique a base de vermiculite exfoliée formés en place - Partie 1: Spécifications relatives aux produits en vrac ou agglomérés avant mise en oeuvreWärmedämmstoffe für Gebäude - An der Verwendungsstelle hergestellte Wärmedämmung mit Produkten aus expandiertem Vermiculite (EV) - Teil 1: Spezifikation für gebundene und Schüttdämstoffe vor dem EinbauTa slovenski standard je istoveten z:EN 14317-1:2004SIST EN 14317-1:2005en91.100.60ICS:SLOVENSKI
STANDARDSIST EN 14317-1:200501-februar-2005

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14317-1August 2004ICS 91.100.60 English versionThermal insulation products for buildings - In-situ thermalinsulation formed from exfoliated vermiculite (EV) products - Part1: Specification for bonded and loose-fill products beforeinstallationProduits isolants thermiques pour le bâtiment - Isolationthermique formée en place à base de granulats légers devermiculite exfoliée (EV) - Partie 1: Spécification deproduits liés et en vrac avant mise en oevreWärmedämmstoffe für Gebäude - An derVerwendungsstelle hergestellte Wärmedämmung mitProdukten aus expandiertem Vermiculite (EV) - Teil 1:Spezifikation für gebundene und Schüttdämstoffe vor demEinbauThis European Standard was approved by CEN on 10 June 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14317-1:2004: E

Determination of the declared values of thermal conductivity.12 Annex B (normative)
Factory production control.14 Annex C (normative)
Preparation of the test specimens to measure thermal conductivity.15 Annex D (normative)
Special conditions to be used for the determination of organic content.16 Annex E (normative)
Determination of the water repellency of exfoliated vermiculite.17 Annex F (informative)
Example of the determination of the declared value of thermal conductivity for a product or product group.19 Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or other provisions of EU Directives.21 Bibliography.26

W/(m·K) λD is the declared thermal conductivity
W/(m·K) λI is one test result of thermal conductivity W/(m·K) λ90/90 is the 90 % fractile with a confidence level of 90 % for the thermal conductivity W/(m·K) λmean is the mean thermal conductivity W/(m·K) µ is the water vapour diffusion resistance factor — n is the number of test results — RD is the declared thermal resistance m2·K/W R90/90 is the 90 % fractile with a confidence level of 90 % for the thermal resistance m2·K/W sλ is the estimate of the standard deviation of the thermal conductivity W/(m·K)
CR is the symbol of the declared value for crushing resistance
LD is the symbol of the declared value for loose bulk density
PS is the symbol of the declared particle size
WR is the symbol for water repellency
Abbreviated terms used in this document: EVA is vermiculite aggregate as defined in 3.1.2 EVC is coated vermiculite as defined in 3.1.3 EVH is hydrophobic vermiculite as defined in 3.1.4 EVM is premixed vermiculite as defined in 3.1.5 ITT is initial type testing 4 Requirements 4.1 General Product properties shall be assessed in accordance with Clause 5. To comply with this document, products shall meet the requirements of 4.2, and the requirements of 4.3 as appropriate. One test result for a product property is the average of the measured values on the number of test specimens given in Table 1. 4.2 For all applications 4.2.1 Thermal resistance and thermal conductivity Thermal resistance and thermal conductivity shall be based upon measurements carried o
...