EN ISO 17573-3:2023

SLOVENSKI STANDARD
01-november-2023
Nadomešča:
SIST-TS CEN ISO/TS 17573-3:2021
Elektronsko pobiranje pristojbin - Sistemska arhitektura za cestninjenje vozil - 3.
del: Podatkovni slovar (ISO 17573-3:2023)
Electronic fee collection - System architecture for vehicle-related tolling - Part 3: Data
dictionary (ISO 17573-3:2023)
Elektronische Gebührenerhebung - Systemarchitektur für fahrzeugbezogene Maut - Teil
3: Datendefinition (ISO 17573-3:2023)
Perception du télépéage Architecture de systèmes pour le péage lié aux véhicules
Partie 3: Dictionnaire de données (ISO 17573-3:2023)
Ta slovenski standard je istoveten z: EN ISO 17573-3:2023
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 17573-3
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2023
EUROPÄISCHE NORM
ICS 03.220.20; 35.240.60 Supersedes CEN ISO/TS 17573-3:2021
English Version
Electronic fee collection - System architecture for vehicle-
related tolling - Part 3: Data dictionary (ISO 17573-
3:2023)
Perception du télépéage - Architecture de systèmes Elektronische Gebührenerhebung - Systemarchitektur
pour le péage lié aux véhicules - Partie 3: Dictionnaire für fahrzeugbezogene Maut - Teil 3: Datendefinition
de données (ISO 17573-3:2023) (ISO 17573-3:2023)
This European Standard was approved by CEN on 24 July 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17573-3:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 17573-3:2023) has been prepared by Technical Committee ISO/TC 204
"Intelligent transport systems" in collaboration with Technical Committee CEN/TC 278 “Intelligent
transport systems” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2024, and conflicting national standards
shall be withdrawn at the latest by February 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TS 17573-3:2021.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 17573-3:2023 has been approved by CEN as EN ISO 17573-3:2023 without any
modification.
INTERNATIONAL ISO
STANDARD 17573-3
First edition
2023-08
Electronic fee collection — System
architecture for vehicle-related
tolling —
Part 3:
Data dictionary
Perception de télépéage — Architecture de systèmes pour le péage lié
aux véhicules —
Partie 3: Dictionnaire de données
Reference number
ISO 17573-3:2023(E)
ISO 17573-3:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 17573-3:2023(E)
Contents Page
Foreword . vi
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Abbreviated terms . 4
5 EFC common data object definitions . 5
5.1 General . 5
5.2 Subtypes of simple data types . 6
5.2.1 AccountStatus . 6
5.2.2 ActualNumberOfPassengers. 6
5.2.3 Altitude . 6
5.2.4 Axles . 7
5.2.5 CabType . 7
5.2.6 ChassisType . 7
5.2.7 Co2EmissionClass . 8
5.2.8 Co2EmissionValue . 9
5.2.9 Co2EmissionValueLoad . . 9
5.2.10 Co2Scheme . 9
5.2.11 ContractAuthenticator . 9
5.2.12 ContractSerialNumber . 9
5.2.13 CopValue. 10
5.2.14 CountryCode . 10
5.2.15 DetectionMode . 10
5.2.16 EmissionUnit . 11
5.2.17 EngineCharacteristics . 11
5.2.18 EquipmentIccId . 13
5.2.19 EquipmentObuId .13
5.2.20 EquipmentStatus . 14
5.2.21 EuroValue . 14
5.2.22 DistanceUnit . 14
5.2.23 IssuerIdentifier . 15
5.2.24 Latitude. 15
5.2.25 LocalVehicleClassId. 15
5.2.26 LocationClassId .15
5.2.27 Longitude . 16
5.2.28 PaymentSecurityData . 16
5.2.29 PayUnit . 16
5.2.30 PersonalAccountNumber . 17
5.2.31 RearWheelsSteeringType . 17
5.2.32 ReceiptAuthenticator . 18
5.2.33 ReceiptDistance . 18
5.2.34 ResultFin. 18
5.2.35 ReceiptIccId . 19
5.2.36 ReceiptObuId . 19
5.2.37 ResultOp. 19
5.2.38 ReceiptServiceSerialNumber . 21
5.2.39 ReceiptText . 21
5.2.40 StationType . 21
5.2.41 SuspensionType . 21
5.2.42 TariffClassId . 22
5.2.43 Time . 22
iii
ISO 17573-3:2023(E)
5.2.44 TimeClassId . 22
5.2.45 TimeUnit .22
5.2.46 TrailerType . 23
5.2.47 TyreConfiguration . . 23
5.2.48 UserClassId .23
5.2.49 VehicleAuthenticator . 24
5.2.50 VehicleClass . . 24
5.2.51 VehicleCurrentMaxTrainWeight . 24
5.2.52 VehicleTechnicalPermissibleMaxLadenMass . 24
5.2.53 VehicleTotalDistance . 25
5.2.54 VehicleUsageCategoryType . 25
5.2.55 VehicleWeightLaden . 26
5.2.56 WeekDay .26
5.3 Single level data types . 26
5.3.1 AbsolutePosition2d . 26
5.3.2 AbsolutePosition3d . 27
5.3.3 AxleWeightLimit . 27
5.3.4 AxleWeightLimits . 27
5.3.5 DateCompact .28
5.3.6 DieselEmissionValues .28
5.3.7 DriverCharacteristics .28
5.3.8 Distance .28
5.3.9 Duration .29
5.3.10 EngineDetails .29
5.3.11 EuVehicleGroup .29
5.3.12 ExhaustEmissionValues .29
5.3.13 FutureCharacteristics .30
5.3.14 NumberOfAxles . 30
5.3.15 ObeId . 31
5.3.16 Particulate . 31
5.3.17 PassengerCapacity . 31
5.3.18 PaymentFee . . . 31
5.3.19 Period . 32
5.3.20 Provider . 32
5.3.21 RelativePosition3d . 32
5.3.22 SessionClass . 32
5.3.23 SessionLocation.33
5.3.24 SignedValue . 33
5.3.25 SoundLevel . 33
5.3.26 TariffClassDescription . 33
5.3.27 TimeCompact . .34
5.3.28 TrailerDetails .34
5.3.29 WheelsConfiguration .34
5.4 Two-level data types. 35
5.4.1 AxlesWeightLimits . 35
5.4.2 ChargeObjectId . 35
5.4.3 ContractValidity . 35
5.4.4 DateAndTime .36
5.4.5 EnvironmentalCharacteristics .36
5.4.6 InitialVehicleRegistrationDate .36
5.4.7 Lpn . 36
5.4.8 PaymentMeans . 37
5.4.9 PaymentMeansBalance . . .38
5.4.10 Point .38
5.4.11 PurseBalance .38
5.4.12 TrailerCharacteristics.38
5.4.13 ValidityOfContract . 39
5.4.14 VehicleAxlesNumber .39
iv
ISO 17573-3:2023(E)
5.4.15 VehicleDimensions . 39
5.4.16 VehicleIdentificationNumber .39
5.4.17 VehicleWeightLimits .40
5.5 Three-level data types .40
5.5.1 EfcContextMark .40
5.5.2 ReceiptContract .40
5.5.3 ReceiptData . 41
5.5.4 ReceiptFinancialPart . 42
5.5.5 ReceiptServicePart . 42
5.5.6 UserId . 43
5.5.7 VehicleAxles . 43
5.5.8 VehicleSpecificCharacteristics . 43
5.6 Complex data types .44
5.6.1 AggregatedSingleTariffClassSession .44
5.6.2 DetectedChargeObject . 45
5.6.3 VehicleDescription .46
Annex A (normative) EFC common data type definitions .47
Bibliography .48
v
ISO 17573-3:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use
of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed
patent rights in respect thereof. As of the date of publication of this document, ISO had not received
notice of (a) patent(s) which may be required to implement this document. However, implementers are
cautioned that this may not represent the latest information, which may be obtained from the patent
database available at www.iso.org/patents. ISO shall not be held responsible for identifying any or all
such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 204, Intelligent transport systems, in
collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC
278, Intelligent transport systems, in accordance with the Agreement on technical cooperation between
ISO and CEN (Vienna Agreement).
This first edition cancels and replaces the first edition (ISO/TS 17573-3:2021), which has been
technically revised.
The main changes are as follows:
[15]
— CO emission class data types have been added to underpin the revised Directive 1999/62/EC
(i.e. Eurovignette directive regarding the charging of vehicles for the use of certain infrastructure),
[21]
updated by Directive (EU) 2022/362;
— a second level of version identifier (i.e. minor version) of the abstract syntax notation one (ASN.1)
module has been added to provide enhanced support to standards that import data types from this
document.
A list of all parts in the ISO 17573 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
vi
ISO 17573-3:2023(E)
Introduction
This document is a part of the ISO 17573 series which defines the system architecture for vehicle-
related tolling. ISO 17573-1 gives a reference model for the system architecture. ISO/TS 17573-2
provides a collection of terms and definitions within the field of electronic fee collection (EFC) and road
user charging that are used in the different documents published in ISO and CEN under the general title,
Electronic fee collection.
This document (ISO 17573-3) provides a data dictionary that contains the definitions of ASN.1 (data)
types and the associated semantics.
The document is intended to be used as a reference by editors of ISO and CEN documents in EFC and in
related areas of standardization (such as Intelligent transport systems, ITS).
It is foreseen that the library of ASN.1 (data) types contained in this document will be augmented with
additional definitions as these become available.
vii
INTERNATIONAL STANDARD ISO 17573-3:2023(E)
Electronic fee collection — System architecture for vehicle-
related tolling —
Part 3:
Data dictionary
1 Scope
This document specifies the syntax and semantics of data objects in the field of electronic fee collection
(EFC). The definitions of data types and assignment of semantics are provided in accordance with the
abstract syntax notation one (ASN.1) technique, as specified in ISO/IEC 8824-1. This document defines:
— ASN.1 (data) types within the fields of EFC;
— ASN.1 (data) types of a more general use that are used more specifically in standards related to EFC.
This document does not seek to define ASN.1 (data) types that are primarily related to other fields
that operate in conjunction with EFC, such as cooperative intelligent transport systems (C-ITS), the
financial sector, etc.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO/TS 17573-2, Electronic fee collection — System architecture for vehicle related tolling — Part 2:
Vocabulary
ISO 612, Road vehicles — Dimensions of motor vehicles and towed vehicles — Terms and definitions
ISO 3166-1, Codes for the representation of names of countries and their subdivisions — Part 1: Country
code
ISO 1176, Road vehicles — Masses — Vocabulary and codes
ISO 4217, Codes for the representation of currencies
ISO/IEC 7812-1, Identification cards — Identification of issuers — Part 1: Numbering system
ISO/IEC 7812-2, Identification cards — Identification of issuers — Part 2: Application and registration
procedures
ISO/IEC 8824-1, Information technology — Abstract Syntax Notation One (ASN.1) — Part 1: Specification
of basic notation
ISO/IEC 8859-1, Information technology — 8-bit single-byte coded graphic character sets — Part 1: Latin
alphabet No. 1
ISO/IEC 8859-2, Information technology — 8-bit single-byte coded graphic character sets — Part 2: Latin
alphabet No. 2
ISO/IEC 8859-3, Information technology — 8-bit single-byte coded graphic character sets — Part 3: Latin
alphabet No. 3
ISO 17573-3:2023(E)
ISO/IEC 8859-4, Information technology — 8-bit single-byte coded graphic character sets — Part 4: Latin
alphabet No. 4
ISO/IEC 8859-5, Information technology — 8-bit single-byte coded graphic character sets — Part 5: Latin/
Cyrillic alphabet
ISO/IEC 8859-6, Information technology — 8-bit single-byte coded graphic character sets — Part 6: Latin/
Arabic alphabet
ISO/IEC 8859-7, Information technology — 8-bit single-byte coded graphic character sets — Part 7: Latin/
Greek alphabet
ISO/IEC 8859-8, Information technology — 8-bit single-byte coded graphic character sets — Part 8: Latin/
Hebrew alphabet
ISO/IEC 8859-9, Information technology — 8-bit single-byte coded graphic character sets — Part 9: Latin
alphabet No. 5
ISO/IEC 8859-10, Information technology — 8-bit single-byte coded graphic character sets — Part 10:
Latin alphabet No. 6
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO/TS 17573-2 and the following
apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1
BITSTRING
simple type (3.14) whose distinguished values are an ordered sequence of zero, one or more bits
[SOURCE: ISO/IEC 8824-1:2021, 3.8.7, modified — Term modified from "BITSTRING type" to
"BITSTRING" and domain "" added.]
3.2
CHOICE
type defined by referencing a list of distinct types; each value of the choice type is derived from
the value of one of the component types (3.4)
Note 1 to entry: Each value of the choice type is derived from the value of one of the component types.
[SOURCE: ISO/IEC 8824-1:2021, 3.8.14, modified — Term modified from "CHOICE type" to "CHOICE"
and domain "" added. Note 1 to entry also added.]
3.3
complex data type
one type that has more than three levels (3.17)
3.4
component type
one of the types referenced when defining a CHOICE (3.2), SET (3.12), SEQUENCE (3.10), SET OF (3.13), or
SEQUENCE OF (3.11)
[SOURCE: ISO/IEC 8824-1:2021, 3.8.15]
ISO 17573-3:2023(E)
3.5
data type
categorization of an abstract set of possible values, characteristics, and set of operations for an attribute
[SOURCE: ISO/IEC 25012:2008, 4.7 — modified, NOTE removed.]
3.6
INTEGER
simple type (3.14) with distinguished values which are the positive and negative whole numbers,
including zero (as a single value)
[SOURCE: ISO/IEC 8824-1:2021, 3.8.48, modified — Term modified from "INTEGER type" to "INTEGER"
and domain "" added.]
3.7
object
well-defined piece of information, definition or specification which requires a name in order to identify
its use in an instance of communication
[SOURCE: ISO/IEC 8824-1:2021, 3.8.52]
3.8
OCTET STRING
simple type (3.14) whose distinguished values are an ordered sequence of zero, one or more
octets, each octet being an ordered sequence of eight bits
[SOURCE: ISO/IEC 8824-1:2021, 3.8.55, modified — Term modified from "OCTET STRING type" to
"OCTET STRING" and domain "" added.]
3.9
parent type
type that is being constrained when defining a subtype (3.16), and which governs the subtype notation
[SOURCE: ISO/IEC 8824-1:2021, 3.8.58, modified — Term modified from "parent type (of a subtype)" to
"parent type".]
3.10
SEQUENCE
type defined by referencing a fixed, ordered list of types (some of which can be declared to be
optional)
Note 1 to entry: Each value of the SEQUENCE type is an ordered list of values, one from each component type (3.4).
[SOURCE: ISO/IEC 8824-1:2021, 3.8.67, modified — Term modified from "SEQUENCE types" to
"SEQUENCE" and domain "" added. Second part of original definition moved to Note 1 to entry.]
3.11
SEQUENCE-OF
type defined by referencing a single component type (3.4)
Note 1 to entry: Each value in the SEQUENCE-OF type is an ordered list of zero, one or more values of the
component type.
[SOURCE: ISO/IEC 8824-1:2021, 3.8.68, modified — Term modified from "SEQUENCE-OF types" to
"SEQUENCE" and domain "" added. Second part of original definition moved to Note 1 to entry.]
3.12
SET
type defined by referencing a fixed, unordered, list of types (some of which may be declared to
be optional)
Note 1 to entry: Each value in the SET type is an unordered list of values, one from each component type (3.4).
ISO 17573-3:2023(E)
Note 2 to entry: Where a component type is declared to be optional, a value of the SET type need not contain a
value of that component type.
[SOURCE: ISO/IEC 8824-1:2021, 3.8.72, modified — Term modified from "SET types" to "SET" and
domain "" added. Second part of original definition moved to Note 1 to entry. Note 1 to entry
updated as Note 2 to entry.]
3.13
SET-OF
types defined by referencing a single component type (3.4)
Note 1 to entry: Each value in the SET-OF type is an unordered list of zero, one or more values of the component
type.
[SOURCE: ISO/IEC 8824-1:2021, 3.8.73, modified — Term modified from "SET-OF types" to "SET-OF"
and domain "" added. Second part of original definition moved to Note 1 to entry.]
3.14
simple type
type defined by directly specifying the set of their values
[SOURCE: ISO/IEC 8824-1:2021, 3.8.74]
3.15
single-level data type
data type (3.5) which is a SEQUENCE (3.10), or SEQUENCE OF (3.11) defined by referencing a simple type
(3.14) or a subtype (3.16) of a simple type
3.16
subtype
type whose values are a subset (or the complete set) of the values of some other type
(the parent type) (3.9)
[SOURCE: ISO/IEC 8824-1:2021, 3.8.76, modified — Term modified from "subtype (of a parent type)" to
"subtype" and domain "" added.]
3.17
three-level data type
data type (3.5) which is a CHOICE (3.2), SEQUENCE (3.10), or SEQUENCE OF (3.11) defined by referencing a
two-level data type (3.18)
3.18
two-level data type
data type (3.5) which is a CHOICE (3.2), SEQUENCE (3.10), or SEQUENCE OF (3.11) defined by referencing a
single-level data type (3.15)
4 Abbreviated terms
ASN.1 abstract syntax notation one
BCD binary coded decimal
CO carbon monoxide
CO carbon dioxide
DSRC dedicated short-range communication
EFC electronic fee collection
ISO 17573-3:2023(E)
GLONASS global navigation satellite system of the Russian Federation
GNSS global navigation satellite system
GPS global positioning system
GTRF global terrestrial reference system
HC hydrocarbon
ICC integrated circuit(s) card
ITRF international terrestrial reference frame
ITRS international terre
...