EN 14366:2004
(Main)Laboratory measurement of noise from waste water installations
Laboratory measurement of noise from waste water installations
This document:
- specifies methods for the measurement of airborne and structure-borne sound produced in waste water and rain water installations under laboratory conditions;
- defines the expression of the results.
It is applicable to waste water piping systems and parts thereof, but not to the actual sources of the wastewater, e.g. lavatories, toilets and bathtubs or any active units. It applies to pipes with natural ventilation and made of any common material in commonly used diameters (up to 150 mm).
The results obtained can be used for the comparison of products and materials. It may serve in estimating the behaviour of waste water systems in a building under certain conditions. Nevertheless, this standard does not provide a normalized procedure for calculating the acoustical properties of such installations in a building.
Messung der Geräusche von Abwasserinstallationen im Prüfstand
Der vorliegende europäische Norm-Entwurf
¾ legt Verfahren fest, mit denen in Abwasser- und Regenwasserinstallationen entstandener Luft- und Körper-schall unter Laborbedingungen gemessen werden kann;
¾ legt die Angabe der Ergebnisse fest.
Er ist auf Abwasser-Rohrleitungssysteme und deren Teile, jedoch nicht auf die eigentlichen Abwasserquellen, z. B. Waschräume, Toiletten und Badewannen, anwendbar. Er ist auf Rohre mit natürlicher Lüftung anwendbar, die aus jedem üblichen Material bestehen können und die üblichen Durchmesser haben.
Die erhaltenen Ergebnisse können für den Vergleich von Produkten und Werkstoffen verwendet werden. Er kann zur Einschätzung des Verhaltens von Abwassersystemen in einem Gebäude unter bestimmten Bedingungen dienen. Diese Norm liefert jedoch kein normiertes Verfahren zur Berechnung der akustischen Eigenschaften solcher Installationen in einem Gebäude.
Mesurage en laboratoire du bruit émis par les installations d'évacuation des eaux usées
Le présent projet de Norme européenne :
¾ spécifie des méthodes permettant de mesurer le bruit aérien et le bruit structural générés par des installations d'évacuation des eaux usées et des eaux de pluie dans des conditions de laboratoire ;
¾ définit l'expression des résultats.
Il s'applique aux systèmes de canalisations d'évacuation des eaux usées et aux éléments associés, à l'exclusion des véritables sources des eaux usées, par exemple les cuvettes de WC, les toilettes et les baignoires ou tout équipement actif. Il s'applique aux canalisations avec aération naturelle, réalisées en un matériau courant quelconque dans des diamètres couramment utilisés (jusqu'à 150 mm).
Les résultats obtenus peuvent être utilisés pour comparer les produits et les matériaux. Cela peut servir à apprécier le comportement des systèmes d'évacuation des eaux usées dans un bâtiment dans certaines conditions. Néanmoins, la présente norme ne fournit pas de mode opératoire normalisé pour le calcul des propriétés acoustiques de telles installations dans un bâtiment.
Laboratorijsko merjenje hrupa pri napeljavah za odpadno vodo
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Laboratorijsko merjenje hrupa pri napeljavah za odpadno vodoMessung der Geräusche von Abwasserinstallationen im PrüfstandMesurage en laboratoire du bruit émis par les installations d'évacuation des eaux uséesLaboratory measurement of noise from waste water installations91.140.80Drenažni sistemiDrainage systems17.140.20Emisija hrupa naprav in opremeNoise emitted by machines and equipmentICS:Ta slovenski standard je istoveten z:EN 14366:2004SIST EN 14366:2005en01-februar-2005SIST EN 14366:2005SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14366November 2004ICS 17.140.20; 91.140.80 English versionLaboratory measurement of noise from waste water installationsMesurage en laboratoire du bruit émis par les installationsd'évacuation des eaux uséesMessung der Geräusche von Abwasserinstallationen imPrüfstandThis European Standard was approved by CEN on 23 September 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14366:2004: ESIST EN 14366:2005
Wall structural sensitivity measurement.17 A.1 Measurement procedure.17 A.2 Applicability of the method.17 Annex B (informative)
Background ; application of reciprocity for calibrating the test wall.18 Bibliography.20 SIST EN 14366:2005
EN 61672-1, Electroacoustics - Sound
level meters - Part 1:
Specifications (IEC
61672-1:2002). EN ISO 140-3:1995, Acoustics – Measurement of sound insulation in buildings and of building elements – Part 3: Laboratory measurements of airborne sound insulation of building elements (ISO 140-3:1995). EN ISO 354, Acoustics – Measurement of sound absorption in a reverberation room (ISO 354:2003). EN ISO 6926, Acoustics – Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2000). ISO 5348, Mechanical vibration and shock – Mechanical mounting of accelerometers. ISO 16063-21, Methods for the calibration of vibration and shock transducers -- Part 21: Vibration calibration by comparison with a reference transducer. 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 waste water any type of water including rainwater evacuated from buildings into the sewer system 3.2 waste water installation the total of pipes and all fixing components, used to evacuate waste water, but excluding the actual sources of the waste water, e.g. sinks, toilets, bathtubs, gutter or any active units (pumps…) 3.3 specimen object of tests according to this standard. Specimens are simple wastewater installation systems with a single path of water flow. Any combination of commercial elements may be assembled to form a specimen SIST EN 14366:2005
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.