CEN/TR 15500-2:2016

SLOVENSKI STANDARD
01-maj-2018
(QHUJLMVNHODVWQRVWLVWDYE1DSUDYH]DUHJXODFLMRVLVWHPRY]DRJUHYDQMH
SUH]UDþHYDQMHLQNOLPDWL]DFLMRGHO5D]ODJDLQXWHPHOMLWHYSU(1
0RGXOL000
Energy Performance of Buildings - Control for heating, ventilating and air-conditioning
applications - Part 2: Accompanying TR prEN 15500-1:2015 - Modules M3-5,M4-5,M5-5
Ta slovenski standard je istoveten z: CEN/TR 15500-2:2016
ICS:
91.140.10 Sistemi centralnega Central heating systems
ogrevanja
91.140.30 3UH]UDþHYDOQLLQNOLPDWVNL Ventilation and air-
VLVWHPL conditioning systems
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

CEN/TR 15500-2
TECHNICAL REPORT
RAPPORT TECHNIQUE
August 2016
TECHNISCHER BERICHT
ICS 97.120; 91.140.30
English Version
Energy Performance of Buildings - Control for heating,
ventilating and air-conditioning applications - Part 2:
Accompanying TR prEN 15500-1:2015 - Modules M3-
5,M4-5,M5-5
Begleitender TR zu EN 15500
This Technical Report was approved by CEN on 11 April 2016. It has been drawn up by the Technical Committee CEN/TC 247.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 15500-2:2016 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
Introduction . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 Symbols and abbreviations . 8
4.1 Symbols . 8
4.2 Abbreviations . 8
5 Functional and acceptance test . 8
5.1 Objective of the Test methodology . 8
5.2 Testing procedures — Test principle . 8
5.3 Test parameters. 9
5.3.1 Temperature parameters . 9
5.3.2 Time parameters . 10
5.3.3 Product configuration . 10
6 Definition of Control Accuracy (CA), Control Variation (CV) and Control to Setpoint
Deviation (CSD) . 11
6.1 General . 11
6.2 Definition of the Control Accuracy for heating (CA ) . 12
H
6.3 Definition of the Control Accuracy for cooling (CAC) . 13
6.4 Definition of CV and CSD . 13
7 Test facility description — General layout . 13
8 Sensor side interface . 15
8.1 General . 15
8.2 Temperature interface for the controller . 15
8.2.1 Option 1 - Sensor resistance simulator . 15
8.2.2 Option 2 - Climatic box . 16
8.3 Pressure interface for the controller (VAV application) . 17
8.3.1 General . 17
8.3.2 Pressure generator . 17
8.3.3 Voltage signal . 18
8.4 Actuator side interface . 18
8.4.1 General . 18
8.4.2 Interface for real valve/drive combinations . 19
8.4.3 Interface for other outputs . 20
8.5 Interface between real and simulated environment. 20
8.5.1 General . 20
8.5.2 Link from simulated to real environment . 21
8.5.3 Link from real to simulated environment . 21
8.6 Simulated environment . 21
8.7 Data acquisition system . 21
8.7.1 Function . 21
8.7.2 Specifications . 21
Annex A (informative) Data . 22
A.1 Objective . 22
A.2 Applications . 22
A.3 Building and zone types . 22
A.3.1 Building types . 22
A.3.2 Zone types . 23
A.4 Default time test parameters . 23
Bibliography . 24

European foreword
This document (CEN/TR 15500-2:2016) has been prepared by Technical Committee CEN/TC 247
“Building Automation, Controls and Building Management”, the secretariat of which is held by SNV.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
This document is currently divided into the following parts:
— Control for heating, ventilating and air-conditioning applications — Part 1: Electronic individual
zone control equipment — Modules M3-5,M4-5,M5-5 [currently at Enquiry stage];
— Control for heating, ventilating and air-conditioning applications — Part 2: Accompanying
prEN 15500-1:2016 Modules M3-5,M4-5,M5-5 [the present Technical Report; currently at Voting stage].
Introduction
The CENSE project, the discussions between CEN and the Concerted action highlighted the high page
count of the entire package due to a lot of “textbook” information. This resulted in flooding and
confusing the normative text.
A huge amount of informative contents shall indeed be recorded and available for users to properly
understand, apply and nationally adapt the EPB standards.
The detailed technical rules CEN/TS 16629 Detailed Technical Rules ask for a clear separation between
normative and informative contents:
— to avoid flooding and confusing the actual normative part with informative content;
— to reduce the page count of the actual standard;
— to facilitate understanding of the package.
Therefore each EPB standard shall be accompanied by an informative technical report, like this one,
where all informative contents is collected.
Table 1 shows the relative position of this TR within the EN EPB set of standards.
Table 1 — Position of this TR within the EPBD set of standards
Over- Building Technical Building System
arching (as such)
M1 M2  M3 M4 M5 M6 M7 M8 M9 M10 M11
General General General
Common
terms and
Building
definitions;
Energy Needs
symbols,
Needs
units and
subscripts
(Free) Indoor
Maximum
Conditions
Application Load and
without
Power
Systems
Ways to Ways to Ways to
Express Express Express
Energy Energy Energy
Performance Performance Performance
Building
Heat
Functions Emission
Transfer by x x x
and Building and control
Transmission
Boundaries
Building Heat
Occupancy Transfer by
Distribution
and Infiltration
and control
Operating and
Conditions Ventilation
Aggregation
of Energy
Internal Heat Storage and
Services and
Gains control
Energy
Carriers
Building Solar Heat Generation

Partitioning Gains and control
Load
Building
Calculated dispatching
Dynamics
Energy and
(thermal
Performance operating
mass)
conditions
Descriptions
Descriptions
Descriptions
Heating
Cooling
Ventilation
Humidification
Dehumidification
Domestic Hot
waters
Lighting
Building
automation and
control
PV, wind, .
Over- Building Technical Building System
arching (as such)
M1 M2  M3 M4 M5 M6 M7 M8 M9 M10 M11
Measured Measured Measured
Energy Energy Energy
Performance Performance Performance
Inspection Inspection Inspection
Ways to
Express
BMS
Indoor
Comfort
External
Environment
Conditions
Economic
Calculation
1 Scope
This Technical Report refers to prEN 15500-1, Control for heating, ventilating and air-conditioning
applications — Part 1: Electronic individual zone control equipment — Modules M3-5,M4-5,M5-5.
It contains information to support the correct understanding, use and national adaption of
prEN 15500-1:2016
...