EN ISO 14113:1997
(Main)Gas welding equipment - Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar (ISO 14113:1997)
Gas welding equipment - Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar (ISO 14113:1997)
This European Standard specifies requirements for rubber and plastics hoses in accordance with EN 1327 and hose assemblies for use with compressed or liquefied gases up to a maximum design pressure of 450 bar (45 MPa), within the ambiant temperature range -20°C to +60°C. Rubber hoses for welding, cutting and allied processes for use up to a maximum design pressure of 20 bar (2 MPa), or not exceeding 1,5 bar in the case of acetylene, are covered by EN 559.
Gasschweißgeräte - Gummi- und Kunststoffschlauchleitungen für Druck- oder Flüssiggase bis zu einem maximalen Betriebsdruck von 450 bar (ISO 14113:1997)
In dieser Europäischen Norm sind Anforderungen für Gummi- und Kunststoffschläuche gemäß EN 1327 und Schlaucheinbindungen für Druck- oder Flüssiggase bis zu einem maximalen Betriebsdruck von 450 bar (45 MPa) im Temperaturbereich zwischen -20°C und +60°C festgelegt.
Matériel de soudage aux gaz - Flexibles en caoutchouc et matière plastique pour les gaz comprimés ou liquéfiés jusqu'à une pression nominale maximale de 450 bar (ISO 14113:1997)
Cette norme européenne spécifie les prescriptions relatives aux tuyaux souples en caoutchouc et en matière plastique conformes à l'EN 1327 et aux ensembles de tuyaux souples avec raccords devant être utilisés avec des gaz comprimés ou liquéfiés jusqu'à une pression nominale maximale de 450 bar (45 MPa) à des températures comprises entre -20°C et +60°C.
Oprema za plamensko varjenje – Cevi iz gume in umetnih mas za tlake in utekočinjene pline do najvišjega tlaka 450 bar (ISO 14113:1997)
General Information
- Status
- Withdrawn
- Publication Date
- 14-Aug-1997
- Withdrawal Date
- 14-Oct-2008
- Technical Committee
- CEN/TC 121 - Welding
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 15-Oct-2008
- Completion Date
- 15-Oct-2008
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 09-Feb-2026
Get Certified
Connect with accredited certification bodies for this standard
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
EN ISO 14113:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Gas welding equipment - Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar (ISO 14113:1997)". This standard covers: This European Standard specifies requirements for rubber and plastics hoses in accordance with EN 1327 and hose assemblies for use with compressed or liquefied gases up to a maximum design pressure of 450 bar (45 MPa), within the ambiant temperature range -20°C to +60°C. Rubber hoses for welding, cutting and allied processes for use up to a maximum design pressure of 20 bar (2 MPa), or not exceeding 1,5 bar in the case of acetylene, are covered by EN 559.
This European Standard specifies requirements for rubber and plastics hoses in accordance with EN 1327 and hose assemblies for use with compressed or liquefied gases up to a maximum design pressure of 450 bar (45 MPa), within the ambiant temperature range -20°C to +60°C. Rubber hoses for welding, cutting and allied processes for use up to a maximum design pressure of 20 bar (2 MPa), or not exceeding 1,5 bar in the case of acetylene, are covered by EN 559.
EN ISO 14113:1997 is classified under the following ICS (International Classification for Standards) categories: 23.040.70 - Hoses and hose assemblies. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 14113:1997 has the following relationships with other standards: It is inter standard links to EN ISO 14113:2008, EN 62631-1:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 14113:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-1999
2SUHPD]DSODPHQVNRYDUMHQMH±&HYLL]JXPHLQXPHWQLKPDV]DWODNHLQ
XWHNRþLQMHQHSOLQHGRQDMYLãMHJDWODNDEDU ,62
Gas welding equipment - Rubber and plastic hoses assembled for compressed or
liquefied gases up to a maximum design pressure of 450 bar (ISO 14113:1997)
Gasschweißgeräte - Gummi- und Kunststoffschlauchleitungen für Druck- oder
Flüssiggase bis zu einem maximalen Betriebsdruck von 450 bar (ISO 14113:1997)
Matériel de soudage aux gaz - Flexibles en caoutchouc et matiere plastique pour les gaz
comprimés ou liquéfiés jusqu'a une pression nominale maximale de 450 bar (ISO
14113:1997)
Ta slovenski standard je istoveten z: EN ISO 14113:1997
ICS:
25.160.30 Varilna oprema Welding equipment
83.140.40 Gumene cevi Hoses
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...