EN 738-2:1998
(Main)Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators
Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators
1.1 This European Standard applies to manifold pressure regulators and line pressure regulators intended for the supply of pipeline systems for the following medical gases: - oxygen; - nitrous oxide; - air for breathing; - carbon dioxide; - oxygen/nitrous oxide mixture (50/50% (v/v)); - air for driving surgical tools; - nitrogen for driving surgical tools. 1.2 This European Standard does not apply to pressure regulators for use with suction services (see EN ISO 10079-3).
Druckminderer zur Verwendung mit medizinischen Gasen - Teil 2: Hauptstellendruckregler und Leitungsdruckminderer
Diese Europäische Norm gilt für Hauptstellendruckregler und Leitungsdruckminderer zur Versorgung von Rohrleitungssystemen für folgende medizinische Gase: - Sauerstoff; - Lachgas; - Luft für Beatmungßwecke; Kohlenstoffdioxid; - Sauerstoff-/Lachgasgemisch (50/50 % (V/V)); - Luft zum Betreiben chirurgischer Werkzeuge; Stickstoff zum Betreiben chirurgischer Werkzeuge. Diese Europäische Norm gilt nicht für Druckminderer zur Verwendung mit Absaugversorgungen (siehe EN ISO 10079-3).
Détendeurs pour l'utilisation avec les gaz médicaux - Partie 2: Détendeurs de rampes et de canalisations
La présente norme européenne s'applique aux détendeurs de rampes et aux détendeurs de canalisations destinés à alimenter les réseaux de distribution des gaz médicaux suivants: - l'oxygène; - le protoxyde d'azote; - l'air respirable; - le dioxyde de carbone; - un mélange oxygène/protoxyde d'azote (50/50% (v/v)); - l'air pour les instruments chirurgicaux; - l'azote pour les instruments chirurgicaux. La présente norme européenne ne s'applique pas aux détendeurs utilisés avec les systèmes d'aspiration (voir EN ISO 10079-3).
Tlačni regulatorji za medicinske pline - 2. del: Tlačni regulatorji v razdelilnikih in ceveh
General Information
- Status
- Withdrawn
- Publication Date
- 20-Oct-1998
- Withdrawal Date
- 25-Apr-2006
- Technical Committee
- CEN/TC 215 - Respiratory and anaesthetic equipment
- Drafting Committee
- CEN/TC 215/WG 3 - Medical gas supply systems
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 26-Apr-2006
- Completion Date
- 26-Apr-2006
- Directive
- 93/42/EEC - Medical devices
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
BSI Group
BSI (British Standards Institution) is the business standards company that helps organizations make excellence a habit.
TÜV Rheinland
TÜV Rheinland is a leading international provider of technical services.
TÜV SÜD
TÜV SÜD is a trusted partner of choice for safety, security and sustainability solutions.
Sponsored listings
Frequently Asked Questions
EN 738-2:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators". This standard covers: 1.1 This European Standard applies to manifold pressure regulators and line pressure regulators intended for the supply of pipeline systems for the following medical gases: - oxygen; - nitrous oxide; - air for breathing; - carbon dioxide; - oxygen/nitrous oxide mixture (50/50% (v/v)); - air for driving surgical tools; - nitrogen for driving surgical tools. 1.2 This European Standard does not apply to pressure regulators for use with suction services (see EN ISO 10079-3).
1.1 This European Standard applies to manifold pressure regulators and line pressure regulators intended for the supply of pipeline systems for the following medical gases: - oxygen; - nitrous oxide; - air for breathing; - carbon dioxide; - oxygen/nitrous oxide mixture (50/50% (v/v)); - air for driving surgical tools; - nitrogen for driving surgical tools. 1.2 This European Standard does not apply to pressure regulators for use with suction services (see EN ISO 10079-3).
EN 738-2:1998 is classified under the following ICS (International Classification for Standards) categories: 11.040.10 - Anaesthetic, respiratory and reanimation equipment; 23.060.40 - Pressure regulators. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 738-2:1998 has the following relationships with other standards: It is inter standard links to EN ISO 10524-2:2006, EN 81-72:2003; is excused to EN 738-1:1997. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 738-2:1998 is associated with the following European legislation: EU Directives/Regulations: 93/42/EEC; Standardization Mandates: M/023. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 738-2:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.FHYHKDruckminderer zur Verwendung mit medizinischen Gasen - Teil 2: Hauptstellendruckregler und LeitungsdruckmindererDétendeurs pour l'utilisation avec les gaz médicaux - Partie 2: Détendeurs de rampes et de canalisationsPressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators23.060.40Pressure regulators11.040.10Anestezijska, respiratorna in reanimacijska opremaAnaesthetic, respiratory and reanimation equipmentICS:Ta slovenski standard je istoveten z:EN 738-2:1998SIST EN 738-2:2000en01-januar-2000SIST EN 738-2:2000SLOVENSKI
STANDARD
SIST E
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...