EN 13141-3:2017
(Main)Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 3: Range hoods for residential use without fan
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 3: Range hoods for residential use without fan
This document specifies methods for measuring the main performance characteristics of range hoods for residential use. It applies to air extraction range hoods without fan.
This document does not specify:
- values for performance characteristics;
- safety requirements in relation with the use of methyl-ethyl ketone (MEK).
For air extraction range hoods with fan see IEC 61591
Lüftung von Gebäuden - Leistungsprüfungen von Bauteilen/Produkten für die Lüftung von Wohnungen - Teil 3: Dunstabzughauben für den Hausgebrauch ohne Ventilator
Diese Europäische Norm legt Verfahren zur Messung der Hauptleistungskenngrößen von Dunstabzugs-hauben für Wohnungen fest. Sie gilt für Abluft-Dunstabzugshauben ohne Ventilator.
Diese Europäische Norm legt Folgendes nicht fest:
- Werte für Leistungskenngrößen;
- Sicherheitsanforderungen in Zusammenhang mit der Verwendung von Methylethylketon (MEK).
Für Abluft-Dunstabzugshauben mit Ventilator, siehe EN 61591.
Ventilation des bâtiments - Essais de performance des composants/produits pour la ventilation des logements - Partie 3 : Hottes de cuisine sans ventilateur pour utilisation domestique
La présente Norme européenne spécifie des méthodes pour mesurer les caractéristiques de performance principales des hottes de cuisine pour utilisation domestique. Elle s'applique aux hottes de cuisine à extraction d'air sans ventilateur.
La présente Norme européenne ne spécifie pas :
- de valeur pour les caractéristiques de performance ;
- de prescription de sécurité concernant l'utilisation de méthyléthylcétone (MEK).
Voir l'EN 61591 pour les hottes de cuisine à extraction d'air avec ventilateur.
Prezračevanje stavb - Preskušanje lastnosti sestavnih delov/izdelkov za prezračevanje stanovanjskih stavb - 3. del: Kuhinjske nape za gospodinjstva brez ventilatorja
Ta evropski standard se v povezavi s preskušanjem zmogljivosti odstranjevanja vonjav (točka 7) v celoti nanaša na 13. točko standarda IEC 61561:1997. Izkušnje velikega števila preskusov zmogljivosti kažejo, da tako izvlečne kot recirkulacijske nape s povprečno ali podpovprečno zmogljivostjo pri dejanskih pogojih lahko dosežejo odlične rezultate (dejavniki zmanjšanja vonjav) pri preskusih. Neposredno sklicevanje na 13. točko standarda IEC 61561:1997 je treba odstraniti in v 7. točko standarda EN 13141-3 dodati spremenjeno preskusno metodo.
General Information
- Status
- Published
- Publication Date
- 13-Jun-2017
- Withdrawal Date
- 30-Mar-2019
- Technical Committee
- CEN/TC 156 - Ventilation for buildings
- Drafting Committee
- CEN/TC 156/WG 2 - Natural and mechanical powered residential ventilation
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 04-May-2023
- Completion Date
- 14-Apr-2025
Relations
- Effective Date
- 17-Sep-2014
Overview
EN 13141-3:2017 (CEN) specifies standardized methods to measure the main performance characteristics of residential range hoods without fan. The standard focuses on repeatable, comparable test procedures for aerodynamic behaviour, acoustic emission and transmission, grease absorption and odour extraction. It applies only to air-extraction hoods that rely on a separate fan or central ventilation system; air extraction hoods with integrated fans are covered by EN/IEC 61591.
The document does not set pass/fail values for performance characteristics and does not define safety requirements related to methyl-ethyl ketone (MEK).
Key Topics
Aerodynamic testing: Range hoods are tested using the exhaust/supply air terminal device method referenced from EN 13141-2:2010 to determine flow rate/pressure characteristic curves. Tests are carried out with new filters and take installation size into account.
Acoustic performance:
- Noise production (acoustic power emitted into the room) using reverberant-room methods aligned with EN 13141-2, with specific placement guidance given the hood size and position.
- Insertion loss to quantify sound attenuation through the hood and ducting.
- Sound insulation for a pair of range hoods to assess transmission between dwellings.
Grease absorption: Measured in accordance with EN 61591:1997 (clause 12), quantifying the percentage of grease retained by filters.
Odour extraction: A dedicated test is specified in EN 13141-3 that uses a sealed test room setup (test room volume ~22 ± 2 m3) and controlled generation and sampling of methyl-ethyl ketone (MEK) to determine an odour reduction factor at manufacturer-specified airflow rates. Test-room layout, a moving disturbing element to simulate air movement, pan heating details and multi-point sampling are described.
Applications
This standard is practical for:
- Manufacturers developing or certifying passive range hoods to demonstrate aerodynamic, acoustic and filtration characteristics.
- Test laboratories that require harmonized methods for repeatable measurement and reporting.
- Specifiers and procurement teams who need comparable test data for product selection and performance claims.
- Regulatory bodies and certifiers seeking consistent test methods for product evaluation (note: EN 13141-3 does not set regulatory pass/fail limits).
Benefits include improved comparability of test data, clearer communication of product performance, and support for design decisions in residential ventilation systems.
Related Standards
- EN 13141-2:2010 - Exhaust and supply air terminal device test methods (referenced for aerodynamic and acoustic tests).
- EN 61591 / IEC 61591:1997 - Methods for measuring performance of household range hoods with integrated fans (grease clause referenced).
- EN 12792 - Terminology and symbols used in ventilation standards.
For complete test procedures, installation conditions and presentation of results, consult the full text of EN 13141-3:2017 and the referenced parts of the EN 13141 series.
Frequently Asked Questions
EN 13141-3:2017 is a standard published by the European Committee for Standardization (CEN). Its full title is "Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 3: Range hoods for residential use without fan". This standard covers: This document specifies methods for measuring the main performance characteristics of range hoods for residential use. It applies to air extraction range hoods without fan. This document does not specify: - values for performance characteristics; - safety requirements in relation with the use of methyl-ethyl ketone (MEK). For air extraction range hoods with fan see IEC 61591
This document specifies methods for measuring the main performance characteristics of range hoods for residential use. It applies to air extraction range hoods without fan. This document does not specify: - values for performance characteristics; - safety requirements in relation with the use of methyl-ethyl ketone (MEK). For air extraction range hoods with fan see IEC 61591
EN 13141-3:2017 is classified under the following ICS (International Classification for Standards) categories: 91.140.30 - Ventilation and air-conditioning systems; 97.040.20 - Cooking ranges, working tables, ovens and similar appliances. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13141-3:2017 has the following relationships with other standards: It is inter standard links to EN 13141-3:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13141-3:2017 is associated with the following European legislation: EU Directives/Regulations: 305/2011. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 13141-3:2017 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.YHQWLODWRUMDLüftung von Gebäuden - Leistungsprüfungen von Bauteilen/Produkten für die Lüftung von Wohnungen - Teil 3: Dunstabzughauben für den Hausgebrauch ohne VentilatorVentilation des bâtiments - Essais des performances des composants/produits pour la ventilation des logements - Partie 3 : Hottes de cuisine sans ventilateur pour utilisation domestiqueVentilation for buildings - Performance testing of components/products for residential ventilation - Part 3: Range hoods for residential use without fan97.040.20Cooking ranges, working tables, ovens and similar appliances91.140.30VLVWHPLVentilation and air-conditioning systemsICS:Ta slovenski standard je istoveten z:EN 13141-3:2017SIST EN 13141-3:2017en,fr,de01-oktober-2017SIST EN 13141-3:2017SLOVENSKI
STANDARDSIST EN 13141-3:20041DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13141-3
June
t r s y ICS
{ sä s v rä u râ
{ yä r v rä t r Supersedes EN
s u s v sæ uã t r r vEnglish Version
Ventilation for buildings æ Performance testing of Range hoods for residential use without fan Ventilation des bâtiments æ Essais de performance des logements æ Partie
u ã Hottes de cuisine sans ventilateur pour utilisation domestique
Lüftung von Gebäuden æ Leistungsprüfungen von Teil
uã Dunstabzughauben für den Hausgebrauch ohne Ventilator This European Standard was approved by CEN on
s y March
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s u s v sæ uã t r s y ESIST EN 13141-3:2017
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...