iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN ISO 19116

(Main)

Geographic information - Positioning services (ISO/DIS 19116:2024)

Geographic information - Positioning services (ISO/DIS 19116:2024)

This document specifies the data structure and content of an interface that permits communication between position-providing device(s) and position-using device(s) enabling the position-using device(s) to obtain and unambiguously interpret position information and determine, based on a measure of the degree of reliability, whether the resulting position information meets the requirements of the intended use.
A standardized interface for positioning allows the integration of reliable position information obtained from non-specific positioning technologies and is useful in various location-focused information applications, such as surveying, navigation, intelligent transportation systems (ITS), and location-based services (LBS).

Geoinformationen - Positionierung (ISO/DIS 19116:2024)

Information géographique - Services de positionnement (ISO/DIS 19116:2024)

Le présent document indique la structure des données et le contenu d'une interface qui permet la communication entre un ou plusieurs dispositifs de mesure de position et un ou plusieurs dispositifs utilisant les données de position de sorte que ces derniers puissent obtenir et interpréter les informations de position sans ambiguïté et déterminer, en se fondant sur une mesure du degré de fiabilité, si les informations de position qui en résultent répondent aux exigences de l'utilisation prévue.
Une interface normalisée de positionnement permet l'intégration d'informations de position fiables obtenues à partir de technologies de positionnement non spécifiques et est utile dans diverses applications utilisant des informations ciblées géographiquement, comme l'arpentage, la navigation, les systèmes de transport intelligents (STI) et les services géoréférencés (LBS).

Geografske informacije - Lokacijske storitve (ISO/DIS 19116:2024)

General Information

Status
Not Published
Publication Date
08-Jun-2025
ICS
35.240.70 - IT applications in science
Technical Committee
CEN/TC 287 - Geographic Information
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
03-Oct-2024
Completion Date
03-Oct-2024
Ref Project
oSIST prEN ISO 19116:2024 - Geographic information - Positioning services (ISO/DIS 19116:2024)

Relations

Revises
EN ISO 19116:2019 - Geographic information - Positioning services (ISO 19116:2019)
Effective Date
19-Jul-2023
Revises
EN ISO 19116:2019/A1:2021 - Geographic information - Positioning services - Amendment 1 (ISO 19116:2019/Amd 1:2021)
Effective Date
19-Jul-2023

Buy Standard

prEN ISO 19116:2024prEN ISO 19116:2024
PreviousNext
Draft
prEN ISO 19116:2024
English language
69 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-2024
Geografske informacije - Lokacijske storitve (ISO/DIS 19116:2024)
Geographic information - Positioning services (ISO/DIS 19116:2024)
Geoinformationen - Positionierung (ISO/DIS 19116:2024)
Information géographique - Services de positionnement (ISO/DIS 19116:2024)
Ta slovenski standard je istoveten z: prEN ISO 19116
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT INTERNATIONAL STANDARD
ISO/DIS 19116
ISO/TC 211 Secretariat: SIS
Voting begins on: Voting terminates on:
2024-01-18 2024-04-11
Geographic information — Positioning services
Information géographique — Services de positionnement
ICS: 35.240.70
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 19116:2024(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2024

ISO/DIS 19116:2024(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19116
ISO/TC 211 Secretariat: SIS
Voting begins on: Voting terminates on:

Geographic information — Positioning services
Information géographique — Services de positionnement
ICS: 35.240.70
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2024
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 19116:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

ISO/DIS 19116:2023(E)
Contents Page
Foreword .v
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols, abbreviated terms, backwards compatibility, UML notation, and packages .6
4.1 Symbols and abbreviated terms . 6
4.2 Backwards compatibility . 7
4.3 UML notation. 7
4.4 Package abbreviations . 7
5 Conformance . 8
5.1 Overview . 8
5.2 Conformance requirements . 8
5.3 Structure of requirements clauses . 8
6 Positioning services model . 8
6.1 Overview . 8
6.2 Static data structures of a positioning service . 9
6.3 Basic and extended information from a positioning service . 10
7 Basic information definition and description .11
7.1 Overview . 11
7.2 System information .12
7.2.1 Overview . 12
7.2.2 PS_System. 14
7.2.3 System capability . 15
7.2.4 Positioning technology .15
7.2.5 Referencing method . 16
7.2.6 Instrument identification . 16
7.3 Session . 17
7.3.1 Overview . 17
7.3.2 PS_Session . 17
7.4 Observation information . 18
7.4.1 Overview . 18
7.4.2 PS_ObservationMode . 19
7.4.3 PS_LinkToReferenceSystem . 22
7.4.4 PS_MeasurementType . 22
7.4.5 Observation .22
7.4.6 Coordinate transfer (offset) values . 24
7.4.7 Offset vector . 25
7.4.8 PS_OffsetSourceType .26
7.5 Quality information. 26
7.5.1 Overview . 26
7.5.2 PS_QualityMode .28
7.6 Positioning services operations .29
7.6.1 Definition of positioning services operations .29
7.6.2 Requirements for positioning service operations .29
7.6.3 Applying the positioning services operations . 31
8 Reliability of positioning results .32
8.1 Overview . 32
8.2 Reliability model . 32
9 Technology-specific information .34
9.1 Overview .34
iii
ISO/DIS 19116:2023(E)
9.2 Operating conditions .34
9.2.1 PS_OperatingConditions . 35
9.2.2 PS_ComputationalConditions . 35
9.2.3 PS_PositionFixMode . 36
9.2.4 PS_PositioningMode .36
9.2.5 PS_ProcessingMode . 36
9.2.6 Performance indicators . 37
9.2.7 Measurement conditions . 37
9.3 Raw measurement data .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 19164:2024(Main)
Geographic information - Indoor feature model (ISO 19164:2024)
SIST EN ISO 19164:2024

This document specifies a core semantic classification system of essential indoor features to describe indoor environments required commonly in various location-based indoor applications of buildings. The scope includes the following:
—     semantic description of indoor features and their attributes;
—     feature association between indoor features.
The semantic classification system in this document is compatible with the building model defined in existing related standards. Geometric and topological descriptions of indoor features are not considered in this document. This document does not apply to other architectural structures, such as tunnels.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19152-3:2024(Main)
Geographic information - Land Administration Domain Model (LADM) - Part 3: Marine georegulation (ISO 19152-3:2024)
SIST EN ISO 19152-3:2024

This document specifies the concepts and structure for standardization for georegulation in the marine space.
This document addresses the information structures related to management of legal spaces (such as the international maritime limits and boundaries, marine living and non-living resources management areas, marine conservation areas, etc.) and their related rights and obligations.
This document establishes the common elements and basic schema to structure marine georegulation information system. It builds upon the common components defined in ISO 19152-1.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19152-1:2024(Main)
Geographic information - Land Administration Domain Model (LADM) - Part 1: Generic conceptual model (ISO 19152-1:2024)
SIST EN ISO 19152-1:2024

This document:
—     defines a reference Land Administration Domain Model (LADM) covering basic information-related components of land administration/georegulation;
—     provides an abstract, conceptual model with packages related to:
—     parties (people and organizations),
—     basic administrative units, rights, responsibilities and restrictions (RRRs),
—     spatial units,
—     a generic conceptual model (sources and versioned object);
—     provides terminology for land administration/georegulation, based on various national and international systems, that is as simple as possible in order to be useful in practice. The terminology allows a shared description of different formal or informal practices and procedures in various jurisdictions;
—     provides a content model independent of encoding, allowing for the support of various encodings;
—     provides a basis for national and regional profiles;
—     enables the combining of land administration/georegulation information from different sources in a coherent manner.
The following are outside the scope of this document:
—     interference with (national) land administration/georegulation laws with potentially legal implications due to the possibility of describing different types of systems but in the same notation;
—     construction of external databases with party data, address data, land cover data, physical utility network data, archive data and taxation data. However, the LADM provides stereotype classes for these data sets to indicate which data set elements the LADM expects from these external sources, if available.
This document provides the concepts and basic structure for standardization in the land administration/georegulation domain. It defines a general schema that permits regulatory information to be described. It also allows for the relationship to multiple parties and groups to be expressed together with a referencing structure so that sourcing of all information systems can be maintained. This document establishes the common elements and basic schema upon which more detailed schema can be established.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19144-2:2023(Main)
Geoinformation - Klassifizierungssysteme - Teil 2: Meta-Beschreibungssprache für Landbedeckung (ISO 19144-2:2023)
SIST EN ISO 19144-2:2024

This document specifies a Land Cover Meta Language (LCML) expressed as a UML metamodel that allows different Land Cover classification systems to be described based on physiognomic aspects. This document recognizes that a number of Land Cover classification systems exist. It provides a common reference structure for the comparison and integration of data for any generic Land Cover classification system, but does not intend to replace those classification systems.

  • Standard
    159 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19160-2:2023(Main)
Adressierung - Teil 2: Zuweisen und Verwalten von Adressen für Objekte in der physischen Welt (ISO 19160-2:2023)
SIST EN ISO 19160-2:2024

This document focuses on assigning and maintaining addresses that allow the unambiguous determination of an object in the physical world for purposes of identification and location in the context of public administration and public service delivery. During assignment, an address is first associated with a particular object in the physical world. During maintenance, the address changes, for example, it is re-assigned to a different object, one or more of the address components are modified (e.g. a street name change), or the address is retired when it is no longer used. This document:
a)       specifies a good practice for assigning and maintaining addresses and address data; and
b)       specifies a governance framework for assigning and maintaining addresses and address data.
Very often local governments (e.g. municipalities) are assigned the mandate for the planning, implementation, evaluation and ongoing maintenance of addresses, and they are often supported by other organizations, such as the national government, a postal agency, private sector companies and national or regional organizations. This document is applicable to all organizations who have an interest, role or responsibility in address assignment and maintenance, for example in terms of:
—     developing legislation, policies or regulations for addressing;
—     facilitating and coordinating the naming of address components (the constituent parts of an address) and announcing and communicating these names;
—     installing address component signs in the physical world;
—     designing and implementing business processes related to address assignment and maintenance;
—     designing, implementing and maintaining access to address data;
—     developing software to facilitate the above; and
—     using addresses.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19115-3:2023(Main)
Geographic information - Metadata - Part 3: XML schema implementation for fundamental concepts (ISO 19115-3:2023)
SIST EN ISO 19115-3:2024

This document defines an integrated XML implementation of ISO 19115-1 and ISO 19115-2 by defining the following artefacts:
—     a set of XML schema required to validate metadata instance documents conforming to conceptual model elements defined in ISO 19115-1 and ISO 19115-2; and
—     a set of ISO/IEC 19757-3 (Schematron) rules that implement validation constraints in the ISO 19115-1 and ISO 19115-2 UML models that are not validated by the XML schema.
This document describes the procedure used to generate XML schemas from ISO geographic information conceptual models related to metadata. The XML schemas are generated directly from the conceptual UML model (8.5).

  • Standard
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19111:2020/A2:2023(Amendment)
Geographic information - Referencing by coordinates - Amendment 2 (ISO 19111:2019/Amd 2:2023)
SIST EN ISO 19111:2020/A2:2024
  • Amendment
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19150-6:2023(Main)
Geographic information - Ontology - Part 6: Service ontology register (ISO 19150-6:2023)
SIST EN ISO 19150-6:2023

This document establishes a standard registration and maintenance mechanism for the registration of ISO 19150-4-conformant geographic information service ontologies.
This document makes use of ISO 19135-1 whenever appropriate.
This document does not define semantics operators or rules for ontologies, and does not develop any application ontology.
In relation to ISO 19101-1:2014, 6.2, this document defines and formalizes the following purposes of the ISO geographic information reference model:
—     geographic information service components and their behaviour for data processing purposes over the Web; and
—     OWL ontologies to cast ISO/TC 211 International Standards to benefit from and support the Semantic Web.
In relation to ISO 19101-1:2014, 8.3, this document addresses the Application:Procedural foundation of the ISO geographic information reference model.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19123-3:2023(Main)
Geographic information - Schema for coverage geometry and functions - Part 3: Processing fundamentals (ISO 19123-3:2023, Corrected version 2023-11)
SIST EN ISO 19123-3:2023

This document defines a coverage processing language for server-side extraction, filtering, processing, analytics, and fusion of multi-dimensional geospatial coverages representing, for example, spatio-temporal sensor, image, simulation, or statistics datacubes. Services implementing this language provide access to original or derived sets of coverage information, in forms that are useful for client-side consumption.
This document relies on the ISO 19123-1 abstract coverage model. In this edition, regular and irregular multi-dimensional grids are supported for axes that can carry spatial, temporal or any other semantics. Future editions will additionally support further axis types as well as further coverage types from ISO 19123-1, specifically, point clouds and meshes.

  • Standard
    86 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19123-1:2023(Main)
Geographic information - Schema for coverage geometry and functions - Part 1: Fundamentals (ISO 19123-1:2023)
SIST EN ISO 19123-1:2023

This document defines a conceptual schema for coverages. A coverage is a mapping from a spatial, temporal or spatiotemporal domain to attribute values sharing the same attribute type. A coverage domain consists of a collection of direct positions in a coordinate space that can be defined in terms of spatial and/or temporal dimensions, as well as non-spatiotemporal (in ISO 19111:2019, “parametric”) dimensions. Examples of coverages include point clouds, grids, meshes, triangulated irregular networks, and polygon sets. Coverages are the prevailing data structures in a number of application areas, such as remote sensing, meteorology and mapping of depth, elevation, soil and vegetation. This document defines the coverage concept including the relationship between the domain of a coverage and its associated attribute range. This document defines the characteristics of the domain. The characteristics of the attribute range are not defined in this document, but are defined in implementation standards. Consequently, the standardization target of this document consists of implementation standards, not concrete implementations themselves.

  • Standard
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day