Geographic information - Positioning services (ISO 19116:2019)

This document specifies the data structure and content of an interface that permits communication between position-providing device(s) and position-using device(s) enabling the position-using device(s) to obtain and unambiguously interpret position information and determine, based on a measure of the degree of reliability, whether the resulting position information meets the requirements of the intended use.
A standardized interface for positioning allows the integration of reliable position information obtained from non-specific positioning technologies and is useful in various location-focused information applications, such as surveying, navigation, intelligent transportation systems (ITS), and location-based services (LBS).

Geoinformation - Positionierung (ISO 19116:2019)

Information géographique - Services de positionnement (ISO 19116:2019)

Le présent document indique la structure des données et le contenu d'une interface qui permet la communication entre un ou plusieurs dispositifs de mesure de position et un ou plusieurs dispositifs utilisant les données de position de sorte que ces derniers puissent obtenir et interpréter les informations de position sans ambiguïté et déterminer, en se fondant sur une mesure du degré de fiabilité, si les informations de position qui en résultent répondent aux exigences de l'utilisation prévue.
Une interface normalisée de positionnement permet l'intégration d'informations de position fiables obtenues à partir de technologies de positionnement non spécifiques et est utile dans diverses applications utilisant des informations ciblées géographiquement, comme l'arpentage, la navigation, les systèmes de transport intelligents (STI) et les services géoréférencés (LBS).

Geografske informacije - Lokacijske storitve (ISO 19116:2019)

Ta standard določa strukturo podatkov in vsebino vmesnika za komunikacijo med napravami, ki zagotavljajo položaj, in napravami, ki uporabljajo položaj. Omogoča, da naprave, ki uporabljajo položaj, pridobijo in nedvoumno razlagajo informacije o položaju ter na podlagi stopnje zanesljivosti določijo, ali pridobljena informacija o položaju ustreza zahtevam predvidene uporabe. Standardiziran vmesnik za določanje položaja omogoča integracijo zanesljivih informacij o položaju, pridobljenih iz nespecifičnih tehnologij za pozicioniranje in je uporaben za različne lokacijsko usmerjene vrste uporabe informacij, kot so opazovanje, navigacija, inteligentni transportni sistemi (ITS) in lokacijske storitve (LBS).

General Information

Status
Published
Publication Date
17-Dec-2019
Withdrawal Date
29-Jun-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
18-Dec-2019
Completion Date
18-Dec-2019

Relations

Buy Standard

Standard
EN ISO 19116:2020
English language
73 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-2020
Nadomešča:
SIST EN ISO 19116:2006
Geografske informacije - Lokacijske storitve (ISO 19116:2019)
Geographic information - Positioning services (ISO 19116:2019)
Geoinformation - Positionierung (ISO 19116:2019)
Information géographique - Services de positionnement (ISO 19116:2019)
Ta slovenski standard je istoveten z: EN ISO 19116:2019
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 19116
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2019
EUROPÄISCHE NORM
ICS 35.240.70 Supersedes EN ISO 19116:2006
English Version
Geographic information - Positioning services (ISO
19116:2019)
Information géographique - Services de Geoinformation - Positionierung (ISO 19116:2019)
positionnement (ISO 19116:2019)
This European Standard was approved by CEN on 1 July 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19116:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 19116:2019) has been prepared by Technical Committee ISO/TC 211
"Geographic information/Geomatics" in collaboration with Technical Committee CEN/TC 287
“Geographic Information” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2020, and conflicting national standards shall be
withdrawn at the latest by June 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 19116:2006.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 19116:2019 has been approved by CEN as EN ISO 19116:2019 without any modification.

INTERNATIONAL ISO
STANDARD 19116
Second edition
2019-12
Geographic information — Positioning
services
Information géographique — Services de positionnement
Reference number
ISO 19116:2019(E)
©
ISO 2019
ISO 19116:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

ISO 19116:2019(E)
Contents Page
Foreword .v
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols, abbreviated terms, backwards compatibility, UML notation, and packages .6
4.1 Symbols and abbreviated terms. 6
4.2 Backwards compatibility . . 7
4.3 UML notation . 7
4.4 UML packages . 7
5 Conformance . 8
5.1 Overview . 8
5.2 Conformance requirements . 8
5.3 Structure of requirements clauses . 8
6 Positioning services model . 9
6.1 Overview . 9
6.2 Static data structures of a positioning service . 9
6.3 Basic and extended information from a positioning service .11
7 Basic information definition and description .12
7.1 Overview .12
7.2 System information .13
7.2.1 Overview .13
7.2.2 PS_System .14
7.2.3 System capability .14
7.2.4 Positioning technology .15
7.2.5 Referencing method .15
7.2.6 Instrument identification .16
7.3 Session .16
7.3.1 Overview .16
7.3.2 PS_Session.17
7.4 Observation information .18
7.4.1 Overview .18
7.4.2 PS_ObservationMode .19
7.4.3 PS_LinkToReferenceSystem .22
7.4.4 PS_MeasurementType .22
7.4.5 Observation .22
7.4.6 Coordinate transfer (offset) values .24
7.4.7 Offset vector .26
7.4.8 PS_OffsetSourceType .26
7.5 Quality information .27
7.5.1 Overview .27
7.5.2 PS_QualityMode .29
7.6 Positioning services operations .30
7.6.1 Definition of positioning services operations .30
7.6.2 Requirements for positioning service operations.30
7.6.3 Applying the positioning services operations .32
8 Reliability of positioning results .33
8.1 Overview .33
8.2 Reliability model.33
9 Technology-specific information .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.