EN ISO 19152-3:2024
(Main)Geographic information - Land Administration Domain Model (LADM) - Part 3: Marine georegulation (ISO 19152-3:2024)
Geographic information - Land Administration Domain Model (LADM) - Part 3: Marine georegulation (ISO 19152-3:2024)
This document specifies the concepts and structure for standardization for georegulation in the marine space.
This document addresses the information structures related to management of legal spaces (such as the international maritime limits and boundaries, marine living and non-living resources management areas, marine conservation areas, etc.) and their related rights and obligations.
This document establishes the common elements and basic schema to structure marine georegulation information system. It builds upon the common components defined in ISO 19152-1.
Land Administration Domain Model (LADM) - Teil 3: Georegulierung des Meeres (ISO 19152-3:2024)
Information géographique - Modèle du domaine de l'administration des terres (LADM) - Partie 3: Géoréglementation marine (ISO 19152-3:2024)
Le présent document spécifie les concepts et la structure de normalisation pour la géoréglementation dans l'espace marin.
Le présent document traite des structures d'information liées à la gestion des espaces juridiques, telles que les limites et frontières maritimes internationales, les zones de gestion des ressources marines vivantes et non vivantes, les zones de conservation marine, etc., ainsi que les droits et obligations associés.
Le présent document établit les éléments communs et le schéma de base pour structurer le système d'information de la géoréglementation marine. Il s'appuie sur les composants communs définis dans l'ISO 19152-1.
Geografske informacije - Model domene za zemljiško administracijo (LADM) - 3. del: Georegulacija morja (ISO 19152-3:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 19152-3:2023
01-julij-2023
Geografske informacije - Model domene za zemljiško administracijo (LADM) - 3.
del: Georegulacija morja (ISO/DIS 19152-3:2023)
Geographic information - Land Administration Domain Model (LADM) - Part 3: Marine
georegulation (ISO/DIS 19152-3:2023)
Land Administration Domain Model (LADM) - Teil 3: Georegulierung des Meeres
(ISO/DIS 19152-3:2023)
Information géographique - Modèle du domaine de l'administration des terres (LADM) -
Partie 3: Géoréglementation marine (ISO/DIS 19152-3:2023)
Ta slovenski standard je istoveten z: prEN ISO 19152-3
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
oSIST prEN ISO 19152-3:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN ISO 19152-3:2023
oSIST prEN ISO 19152-3:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19152-3
ISO/TC 211 Secretariat: SIS
Voting begins on: Voting terminates on:
2023-05-29 2023-08-21
Geographic information — Land Administration Domain
Model (LADM) —
Part 3:
Marine georegulation
ICS: 35.240.70
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 19152-3:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
oSIST prEN ISO 19152-3:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19152-3
ISO/TC 211 Secretariat: SIS
Voting begins on: Voting terminates on:
Geographic information — Land Administration Domain
Model (LADM) —
Part 3:
Marine georegulation
ICS: 35.240.70
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 19152-3:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
oSIST prEN ISO 19152-3:2023
ISO/DIS 19152-3:2023(E)
Contents Page
Foreword . vi
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 2
3.1 Terms and definitions . 2
3.2 Abbreviated terms . 3
4 Conformance . 4
4.1 Conformance requirements and testing . 4
4.2 Conformance classes . 4
4.3 Conformance class 1 — Marine Limits and Boundaries in support of UNCLOS . 4
4.4 Conformance class 2 — General marine georegulation . 4
5 Notation . 4
6 Context . 5
7 Feature and attribute structure . 6
7.1 Structural overview . 6
7.2 Geometry structure . 7
7.3 Packages of the LADM Part 3 . 7
8 Marine Georegulation Application Schema. 8
8.1 Marine Georegulation Elements . 8
8.2 Inherited Core Packages . 10
8.3 MRN . 10
8.4 Party Section . 11
8.4.1 Party Section General . 11
8.4.2 MG_Party .12
8.4.3 MG_Party attributes and relationships .12
8.4.4 MG_PartyMember . .13
8.4.5 MG_PartyMember attributes and relationships .13
8.4.6 MG_PartyTypeList . 14
8.4.7 MG_GroupPartyTypeList . 14
8.4.8 Special Data Types . 14
8.5 Administrative Section . 15
8.5.1 Administrative Section General. 15
8.5.2 MG_BAUnit . 17
8.5.3 MG_BAUnit attributes and relationships . 17
8.5.4 MG_BAUnitTypeList . 18
8.5.5 MG_RRR . 18
8.5.6 MG_RRR attributes and relationships . 19
8.5.7 MG_Right . 19
8.5.8 MG_Right attributes and relationships . 19
8.5.9 MG_Responsibility . 20
8.5.10 MG_Responsibility attributes and relationships . 20
8.5.11 MG_Restriction .20
8.5.12 MG_Restriction attributes and relationships . 20
8.5.13 MG_Governance .20
8.5.14 MG_Governance attributes and relationships . 21
8.6 Party to Administrative Section . 22
8.7 Party to Administrative relationships . 22
8.7.1 rrrParty relationship . 22
8.7.2 baunitAsParty relationship . 22
8.8 Spatial Unit Section . 22
iii
oSIST prEN ISO 19152-3:2023
ISO/DIS 19152-3:2023(E)
8.8.1 Spatial Unit Section General . 22
8.8.2 MG_FeatureUnit . 24
8.8.3 MG_FeatureUnit attributes and relationships . 25
8.8.4 MG_SpatialAttribute . 25
8.8.5 MG_SpatialAttribute attributes and relationships . 25
8.8.6 MG_AdditionalSpatialInformation . 26
8.8.7 MG_AdditionalSpatialInformation attributes and relationships . 27
8.8.8 MG_Location .28
8.8.9 MG_Location attributes and relationships .29
8.8.10 MG_Point .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.