EN 16603-50-26:2022

SLOVENSKI STANDARD
01-september-2022
Nadomešča:
SIST EN 16603-50-04:2015
Vesoljska tehnika - Sprejem obvestila CCSDS 232.1-B-2, postopek delovanja
komunikacij-1
Space engineering - Adoption Notice of CCSDS 232.1-B-2, Communications Operation
Procedure-1
Raumfahrttechnik - Adaption CCSDS 232.1-B-2, Kommunikations-Operationsprozedur-1
(COP-1)
Ingénierie spatiale - Notice d’adoption de la CCSDS 232.1-B-2, Communications
Operation Procedure-1
Ta slovenski standard je istoveten z: EN 16603-50-26:2022
ICS:
49.140 Vesoljski sistemi in operacije Space systems and
operations
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 16603-50-26

NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2022
ICS 49.140
Supersedes EN 16603-50-04:2014
English version
Space engineering - Adoption Notice of CCSDS 232.1-B-2,
Communications Operation Procedure-1
Ingénierie spatiale - Notice d'adoption de la CCSDS Raumfahrttechnik - Adaption CCSDS 232.1-B-2,
232.1-B-2, Communications Operation Procedure-1 Kommunikations-Operationsprozedur-1 (COP-1)
This European Standard was approved by CEN on 27 April 2022.

CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical
references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to
any CEN and CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

CEN-CENELEC Management Centre:
Rue de la Science 23, B-1040 Brussels
© 2022 CEN/CENELEC All rights of exploitation in any form and by any means
Ref. No. EN 16603-50-26:2022 E
reserved worldwide for CEN national Members and for
CENELEC Members.
Table of contents
European Foreword . 3
1 Scope . 4
2 Context information. 5
3 Abbreviated terms . 6
4 Application requirements . 7
Bibliography . 11

Tables
Table 4-1: Applicability table for CCSDS 232.1-B-2 . 8

European Foreword
This document (EN 16603-50-26:2022) has been prepared by Technical Committee CEN-
CENELEC/TC 5 “Space”, the secretariat of which is held by DIN.
This standard (EN 16603-50-26:2022) originates from ECSS-E-AS-50-26C.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2023, and conflicting national standards shall
be withdrawn at the latest by January 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
EN 16603-50-24, EN 16603-50-25 and EN 16603-50-26 together supersede EN 16603-50-04:2014.
The main changes with respect to EN 16603-50-04:2014 are listed below:
- Replacement of document by three Adoption Notices.
This document has been prepared under a standardization request given to CEN by the European
Commission and the European Free Trade Association.
This document has been developed to cover specifically space systems and has therefore precedence
over any EN covering the same scope but with a wider domain of applicability (e.g. : aerospace).
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of
Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Scope
This document identifies the clauses and requirements modified with respect to
the standards CCSDS 232.1-B-2, Communications Operation Procedure-1, Issue 2,
September 2010 for application in ECSS.
NOTE The recently published technical corrigendum
has modified CCSDS 232.1-B-2. However, the
changes are not affecting the AS.
Context information
The standard CCSDS 232.1-B-2, Communications Operation Procedure-1, Issue 2,
has been developed by CCSDS in support of CCSDS 231.0-B adopted by ECSS
with EN 16603-50-26 (ECSS-E-AS-50-26).
In the standard CCSDS 232.0-B-3, TC Space Data Link Protocol, CCSDS specifies a
data link layer protocol for the efficient transfer of space application data of
various types and characteristics over ground-to-space links. The
Communications Operation Procedure-1 (COP-1) specified in CCSDS 232.1-B-2
is used with the TC Space Data Link Protocol: it provides a mechanism for
delivery of frames in sequence and without gaps or duplication.
This Adoption Notice adopts and applies CCSDS 232.1-B-2 with a minimum set
of modifications, identified in the present document, to allow for reference and
for a consistent integration in the ECSS system of standard
...