EN ISO 8804-3:2024

SLOVENSKI STANDARD
01-julij-2024
Zahteve za usposabljanje znanstvenih potapljačev - 3. del: Vodja projekta
znanstvenega potapljanja (ISO 8804-3:2024)
Requirements for the training of scientific divers - Part 3: Scientific diving project leader
(ISO 8804-3:2024)
Anforderungen an die Ausbildung von Wissenschaftlichen Tauchern - Teil 3:
Projektleitung Wissenschaftlicher Taucher (ISO 8804-3:2024)
Exigences concernant la formation des plongeurs scientifiques - Partie 3: Responsable
de projet de plongée scientifique (ISO 8804-3:2024)
Ta slovenski standard je istoveten z: EN ISO 8804-3:2024
ICS:
03.100.30 Vodenje ljudi Management of human
resources
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 8804-3
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2024
EUROPÄISCHE NORM
ICS 03.100.30
English Version
Requirements for the training of scientific divers - Part 3:
Scientific diving project leader (ISO 8804-3:2024)
Exigences concernant la formation des plongeurs Anforderungen an die Ausbildung von
scientifiques - Partie 3: Responsable de projet de Wissenschaftlichen Tauchern - Teil 3: Projektleitung
plongée scientifique (ISO 8804-3:2024) Wissenschaftlicher Taucher (ISO 8804-3:2024)
This European Standard was approved by CEN on 25 November 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8804-3:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 8804-3:2024) has been prepared by Technical Committee ISO/TC 228 "Tourism
and related services" in collaboration with Technical Committee CEN/TC 329 “Tourism services” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2024, and conflicting national standards shall
be withdrawn at the latest by October 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 8804-3:2024 has been approved by CEN as EN ISO 8804-3:2024 without any
modification.
International
Standard
ISO 8804-3
First edition
Requirements for the training of
2024-04
scientific divers —
Part 3:
Scientific diving project leader
Exigences concernant la formation des plongeurs scientifiques —
Partie 3: Responsable de projet de plongée scientifique
Reference number
ISO 8804-3:2024(en) © ISO 2024

ISO 8804-3:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 8804-3:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Competencies . 2
5 Prerequisites for training . 2
5.1 General .2
5.2 Health requirements .2
5.3 Scientific diving prerequisites .2
6 Introductory information . 2
7 Theoretical knowledge concerning project leadership . 3
7.1 Experimental design .3
7.2 Generic methods .3
7.3 Planning of scientific dives .3
7.4 Team management .4
7.5 Legal aspects .4
8 Skills . 4
8.1 Practical diving skills .4
8.2 First aid and emergency oxygen administration .5
9 Requirements for training provision . . 5
9.1 Overall supervision .5
9.2 Instructors and lecturers . .6
9.3 Risk assessment .6
9.4 Surface support procedures and related safety provisions .6
9.5 Emergency equipment and procedures.6
9.5.1 Emergency equipment .6
9.5.2 Emergency procedures .7
9.6 Practical training parameters .7
10 Qualification criteria . . 7
10.1 Knowledge .7
10.2 Skills . .8
10.3 Diving leadership.8
10.4 Scientific project .8
Bibliography . 9

iii
ISO 8804-3:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this
...