EN 961:1995
(Main)Gas welding equipment - Manifold regulators used in welding, cutting and allied processes up to 200 bar
Gas welding equipment - Manifold regulators used in welding, cutting and allied processes up to 200 bar
This standard specifies requirements and test methods for manifold regulators for welding, cutting and allied processes. It is applicable to regulators normally used for compressed gases up to 200 bar (20 MPa), for dissolved acetylene, methylacetylene-propadine-mixtures (MPS) and carbondioxide (CO2), to regulate the pressure at the outlet of high-pressure lines from manifold gas cylinders. It is not applicable to regulators fitted directly to the gas cylinders, as defined in EN 585 or to regulators for liquefied petroleum gases.
Gasschweißgeräte - Hauptstellendruckregler für Schweißen, Schneiden und verwandte Verfahren bis 200 bar
Diese Norm enthält Anforderungen und Prüfverfahren für Hauptstellendruckregler für Schweißen, Schneiden und verwandte Verfahren. Sie gilt für Druckregler, die üblicherweise eingesetzt werden für verdichtete Gase bis 200 bar (20 MPa), für gelöstes Acetylen, für Methylacetylen- Propadien-Gemisch (MPS) und Kohlenstoffdioxid (CO2) zum Regulieren des Druckes am Ende von Hochdruckleitungen in Flaschenbatterieanlagen. Sie gilt nicht für unmittelbar an Gasflaschen angebrachte Druckregler, wie in EN 585 enthalten, oder für Druckregler für Flüssiggase.
Matériel de soudage aux gaz - Détendeurs des centrales de bouteilles (de gaz industriels) pour le soudage, le coupage et les techniques connexes jusqu'à 200 bar
La présente norme européenne spécifie les exigences et méthodes d'essai relatives aux détendeurs des centrales de bouteilles pour le soudage, le coupage et les techniques connexes. Elle est applicable aux détendeurs utilisés pour régler la pression à la sortie du circuit haute pression de la centrale de bouteilles de gaz, pour assurer une alimentation en gaz comprimés jusqu'à 200 bar (20 MPa), pour l'acétylène dissous, pour les mélanges de méthylacétylène-propadiène (MPS) et pour le dioxyde de carbone (CO2).
Plinska varilna oprema - Glavni regulatorji tlaka plina za varjenje, rezanje in podobne postopke za tlake do 200 barov
General Information
- Status
- Withdrawn
- Publication Date
- 22-Aug-1995
- Withdrawal Date
- 14-Aug-2001
- Technical Committee
- CEN/TC 121 - Welding
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 15-Aug-2001
- Completion Date
- 15-Aug-2001
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
EN 961:1996
Get Certified
Connect with accredited certification bodies for this standard
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
EN 961:1995 is a standard + national annex and/or foreword published by the European Committee for Standardization (CEN). Its full title is "Gas welding equipment - Manifold regulators used in welding, cutting and allied processes up to 200 bar". This standard covers: This standard specifies requirements and test methods for manifold regulators for welding, cutting and allied processes. It is applicable to regulators normally used for compressed gases up to 200 bar (20 MPa), for dissolved acetylene, methylacetylene-propadine-mixtures (MPS) and carbondioxide (CO2), to regulate the pressure at the outlet of high-pressure lines from manifold gas cylinders. It is not applicable to regulators fitted directly to the gas cylinders, as defined in EN 585 or to regulators for liquefied petroleum gases.
This standard specifies requirements and test methods for manifold regulators for welding, cutting and allied processes. It is applicable to regulators normally used for compressed gases up to 200 bar (20 MPa), for dissolved acetylene, methylacetylene-propadine-mixtures (MPS) and carbondioxide (CO2), to regulate the pressure at the outlet of high-pressure lines from manifold gas cylinders. It is not applicable to regulators fitted directly to the gas cylinders, as defined in EN 585 or to regulators for liquefied petroleum gases.
EN 961:1995 is classified under the following ICS (International Classification for Standards) categories: 23.060.40 - Pressure regulators. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 961:1995 has the following relationships with other standards: It is inter standard links to EN ISO 7291:2001, EN 81-31:2010, EN 81-3:2000+A1:2008, EN 81-2:1998+A3:2009, EN 81-1:1998+A3:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 961:1995 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...