EN 10149-3:1995
(Main)Hot-rolled flat products made of high yield strength steels for cold forming - Part 3: Delivery conditions for normalized or normalized rolled steels
Hot-rolled flat products made of high yield strength steels for cold forming - Part 3: Delivery conditions for normalized or normalized rolled steels
Part 3 of this European Standard, in a4dition to part 1, specifies requirements for flat products made of weldable, hot-rolled, high yield strength steels for cold forming. The grades are given in table 1 (chemical composition) and table 2 (mechanical properties) and are supplied in the normalized or normalized rolled delivery condition as given in 7.2. The steels specified in this European Standard are applicable to hot-rolled flat products in the thickness range of ü 1,5 mm and ¿ 20 mm.
Warmgewalzte Flacherzeugnisse aus Stählen mit hoher Streckgrenze zum Kaltumformen - Teil 3: Lieferbedingungen für normalisierend gewalzte Stähle
Der Teil 3 dieser Europäischen Norm gilt in Verbindung mit Teil 1 für Flacherzeugnisse aus warmgewalzten, schweißbaren Stählen mit hoher Streckgrenze, die für die Kaltumformung bestimmt sind. Die Stahlsorten werden mit den Anforderungen nach Tabelle 1 (chemische Zusammensetzung) sowie nach Tabelle 2 (mechanische Eigenschaften) im normalgeglühten oder normalisierend gewalzten Zustand nach 7.2 geliefert. Die Stähle nach dieser Europäischen Norm werden für warmgewalzte Flacherzeugnisse mit Nenndicken von 1,5 mm bis 20 mm verwendet.
Produits plats laminés à chaud en aciers à haute limite d'élasticité pour formage à froid - Partie 3: Conditions de livraison des aciers à l'état normalisé ou laminage normalisant
La partie 3 de la présente norme européenne, vient s'ajouter à la partie 1 et spécifie les caractéristiques des produits plats en aciers soudables, à haute limite d'élasticité, laminés à chaud, pour formage à froid. Les nuances sont données au tableau 1 (composition chimique) et au tableau 2 (caractéristiques mécaniques) et sont livrées à l'état normalisé ou de laminage normalisant comme indiqué en 7.2. Les aciers spécifiés dans la présente norme européenne concernent les produits plats laminés à chaud dans la gamme d'épaisseur >= 1,5 mm et <= 20 mm.
Vroče valjani ploščati izdelki za hladno preoblikovanje iz jekel z veliko napetostjo tečenja - 3. del: Dobavni pogoji za normalizirana ali normalizacijsko valjana jekla
General Information
- Status
- Withdrawn
- Publication Date
- 09-Sep-1995
- Withdrawal Date
- 24-Sep-2013
- Technical Committee
- ECISS/TC 103 - Structural steels other than reinforcements
- Drafting Committee
- ECISS/TC 10 - Structural steels - Qualities
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 25-Sep-2013
- Completion Date
- 25-Sep-2013
Relations
- Effective Date
- 19-Sep-2009
- Effective Date
- 28-Jan-2026
Frequently Asked Questions
EN 10149-3:1995 is a standard published by the European Committee for Standardization (CEN). Its full title is "Hot-rolled flat products made of high yield strength steels for cold forming - Part 3: Delivery conditions for normalized or normalized rolled steels". This standard covers: Part 3 of this European Standard, in a4dition to part 1, specifies requirements for flat products made of weldable, hot-rolled, high yield strength steels for cold forming. The grades are given in table 1 (chemical composition) and table 2 (mechanical properties) and are supplied in the normalized or normalized rolled delivery condition as given in 7.2. The steels specified in this European Standard are applicable to hot-rolled flat products in the thickness range of ü 1,5 mm and ¿ 20 mm.
Part 3 of this European Standard, in a4dition to part 1, specifies requirements for flat products made of weldable, hot-rolled, high yield strength steels for cold forming. The grades are given in table 1 (chemical composition) and table 2 (mechanical properties) and are supplied in the normalized or normalized rolled delivery condition as given in 7.2. The steels specified in this European Standard are applicable to hot-rolled flat products in the thickness range of ü 1,5 mm and ¿ 20 mm.
EN 10149-3:1995 is classified under the following ICS (International Classification for Standards) categories: 77.140.50 - Flat steel products and semi-products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10149-3:1995 has the following relationships with other standards: It is inter standard links to EN 10149-3:2013, EN 13001-3-1:2012. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10149-3:1995 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/005, M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10149-3:1995 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Warmgewalzte Flacherzeugnisse aus Stählen mit hoher Streckgrenze zum Kaltumformen - Teil 3: Lieferbedingungen für normalisierend gewalzte StähleProduits plats laminés a chaud en aciers a haute limite d'élasticité pour formage a froid - Partie 3: Conditions de livraison des aciers a l'état normalisé ou laminage normalisantHot-rolled flat products made of high yield strength steels for cold forming - Part 3: Delivery conditions for normalized or normalized
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...