Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping

This Part of this European Standard specifies requirements for industrial piping systems made of aluminium and aluminium alloys in addition to the general requirements for industrial piping according to the series of standards EN 13480 and CEN/TR 13480-7.

Metallische industrielle Rohrleitungen - Teil 8: Zusatzanforderungen an Rohrleitungen aus Aluminium und Aluminumlegierungen

Tuyauteries industrielles métalliques - Partie 8: Exigences complémentaires relatives aux tuyauteries en aluminium et alliages d'aluminium

Kovinski industrijski cevovodi - 8. del: Dodatne zahteve za cevovode iz aluminija in aluminijevih zlitin

Ta del tega evropskega standarda poleg splošnih zahtev za industrijske cevovode v skladu s serijo standardov EN 13480:2012 in standardom CEN/TR 13480-7:2002 določa zahteve za industrijske cevne sisteme iz aluminija ali aluminijevih zlitin.

General Information

Status
Withdrawn
Publication Date
26-Jun-2012
Withdrawal Date
27-Jun-2017
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
28-Jun-2017

Relations

Buy Standard

Standard
EN 13480-8:2012
English language
37 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kovinski industrijski cevovodi - 8. del: Dodatne zahteve za cevovode iz aluminija in aluminijevih zlitinMetallische industrielle Rohrleitungen - Teil 8: Zusatzanforderungen an Rohrleitungen aus Aluminium und AluminumlegierungenTuyauteries industrielles métalliques - Partie 8: Exigences complémentaires relatives aux tuyauteries en aluminium et alliages d'aluminiumMetallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping77.150.10Aluminijski izdelkiAluminium products77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:EN 13480-8:2012SIST EN 13480-8:2012en,fr,de01-oktober-2012SIST EN 13480-8:2012SLOVENSKI
STANDARDSIST EN 13480-8:2007/A1:2011SIST EN 13480-8:20071DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13480-8
June 2012 ICS 23.040.01 Supersedes EN 13480-8:2007English Version
Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping
Tuyauteries industrielles métalliques - Partie 8: Exigences complémentaires relatives aux tuyauteries en aluminium et alliages d'aluminium
Metallische industrielle Rohrleitungen - Teil 8: Zusatzanforderungen an Rohrleitungen aus Aluminium und Aluminumlegierungen This European Standard was approved by CEN on 8 May 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13480-8:2012: ESIST EN 13480-8:2012

Dimensional tolerances . 29 Annex B (normative)
Transition joints . 31 Annex Y (informative)
History of EN 13480-8 . 35 Annex ZA (informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 97/23/EC . 36 Bibliography . 37
Figures Figure 6.5.1 — Mitre bend . 14 Figure 7.6.3.1 — Socket welds . 20 Figure A.1 — Dimensional details of spools . 30 Tables Table 5.2-1 — Grouping system based on CEN ISO/TR 15608:2000 and allowable materials of construction based on EN 12392:2000 using the EN AW numbers according to EN 573-3:2009 . 10 Table 6.2-1 — Design stresses for aluminium and aluminium alloy material . 12 Table 6.2-2 — Allowable design strength values for 6 000 series aluminium alloys in the welded condition (see 5.6) . 13 Table 6.5-1 — Special symbols for subclause 6.5 . 14 Table 7.3-1 — Tolerances for welded pipes . 16 Table 7.5-1 — Heat treatment of flat products after cold forming . 17 Table 7.5-2  Heat treatment of pipes after cold forming . 18 Table 7.5-3  Heat tr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.