EN 2002-21:2019

SLOVENSKI STANDARD
01-februar-2020
Aeronavtika - Kovinski materiali - Preskusne metode - 21. del: Radiografsko
preskušanje ulitkov
Aerospace series - Metallic materials - Test methods - Part 21: Radiographic testing of
castings
Luft- und Raumfahrt - Metallische Werkstoffe - Prüfverfahren - Teil 21:
Röntgenographische Prüfung von Gußstücken
Série aérospatiale - Matériaux métalliques - Méthodes d'essai - Partie 21 : Examen
radiographique des pièces moulées
Ta slovenski standard je istoveten z: EN 2002-21:2019
ICS:
49.025.05 Železove zlitine na splošno Ferrous alloys in general
49.025.15 Neželezove zlitine na Non-ferrous alloys in general
splošno
77.140.80 Železni in jekleni ulitki Iron and steel castings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 2002-21
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2019
EUROPÄISCHE NORM
ICS 49.025.05; 49.025.15
English Version
Aerospace series - Metallic materials - Test methods - Part
21: Radiographic testing of castings
Série aérospatiale - Matériaux métalliques - Méthodes Luft- und Raumfahrt - Metallische Werkstoffe -
d'essais - Partie 21 : Examen radiographique des pièces Prüfverfahren - Teil 21: Durchstrahlungsprüfung von
moulées Gußstücken
This European Standard was approved by CEN on 8 July 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2002-21:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Health and safety . 5
5 Principle . 5
6 Testing requirements . 5
7 Inspection report . 7

European foreword
This document (EN 2002-21:2019) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by May 2020, and conflicting national standards shall be withdrawn at
the latest by May 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
1 Scope
This document specifies the requirements for the radiographic testing of castings for aerospace
applications.
It shall be applied when referred to in the EN technical specification or material standard unless
otherwise specified on the drawing, order or testing schedule.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 1330-1, Aerospace series — Non-destructive testing — Terminology — Part 1: List of general terms
EN 1330-2, Aerospace series — Non-destructive testing — Terminology — Part 2: Terms common to the
non-destructive testing methods
EN 1330-3, Aerospace series — Non-destructive testing — Terminology — Part 3: Terms used in industrial
radiographic testin
...