EN ISO 20342-5:2024

SLOVENSKI STANDARD
01-november-2024
Tehnični pripomočki za celovitost tkiv v ležečem položaju - 5. del: Preskusne
metode za odpornost proti čiščenju in razkuževanju (ISO 20342-5:2024)
Assistive products for tissue integrity when lying down - Part 5: Test method for
resistance to cleaning and disinfection (ISO 20342-5:2024)
Unterstützende Produkte zur Gewebeintegrität im Liegen - Teil 5: Reinigungs- und
Desinfektionsbeständigkeit (ISO 20342-5:2024)
Produits d’assistance pour l’intégrité des tissus en position allongée - Partie 5: Méthode
d’essai pour déterminer la résistance au nettoyage et à la désinfection (ISO 20342-
5:2024)
Ta slovenski standard je istoveten z: EN ISO 20342-5:2024
ICS:
11.180.01 Pripomočki za Aids for disabled and
onesposobljene in handicapped persons in
hendikepirane osebe na general
splošno
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 20342-5
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2024
EUROPÄISCHE NORM
ICS 11.180.01
English Version
Assistive products for tissue integrity when lying down -
Part 5: Test method for resistance to cleaning and
disinfection (ISO 20342-5:2024)
Produits d'assistance pour l'intégrité des tissus en Unterstützende Produkte zur Gewebeintegrität im
position allongée - Partie 5: Méthode d'essai pour Liegen - Teil 5: Reinigungs- und
déterminer la résistance au nettoyage et à la Desinfektionsbeständigkeit (ISO 20342-5:2024)
désinfection (ISO 20342-5:2024)
This European Standard was approved by CEN on 24 February 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20342-5:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 20342-5:2024) has been prepared by Technical Committee ISO/TC 173
"Assistive products" in collaboration with Technical Committee CEN/TC 293 “Assistive products and
accessibility” the secretariat of which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2025, and conflicting national standards shall
be withdrawn at the latest by March 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 20342-5:2024 has been approved by CEN as EN ISO 20342-5:2024 without any
modification.
International
Standard
ISO 20342-5
First edition
Assistive products for tissue
2024-09
integrity when lying down —
Part 5:
Test method for resistance to
cleaning and disinfection
Produits d’assistance pour l’intégrité des tissus en position
allongée —
Partie 5: Méthode d’essai pour déterminer la résistance au
nettoyage et à la désinfection
Reference number
ISO 20342-5:2024(en) © ISO 2024

ISO 20342-5:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 20342-5:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Liquid cleaners and chemical disinfectants . 2
6 Test method . 2
7 Test report . 3
Bibliography . 5

iii
ISO 20342-5:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be requ
...