EN 1152:1994
(Main)Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive shafts - Wear and strength tests
Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive shafts - Wear and strength tests
This European Standard specifies the test methods and acceptance criteria for determining resistance against wear, robustness and durability of non rotating guards for power take-off (PTO) drive shafts as defined in clause 2. Pending the results of work being conducted in CEN on this subject matter, the requirements and test methods relative to the ultraviolet radiation resistance of such guards when they are manufactured in plastics materials are not dealt with in this standard. Such equipment is part of world-wide trade, which implies re-export of PTO drive-shafts to countries with extreme temperature, therefore a temperature of - 35 øC has been specified for some tests.
Traktoren und Maschinen für die Land- und Forstwirtschaft - Schutzeinrichtungen für Gelenkwellen - Verschleißprüfungen und Festigkeitsprüfungen
Diese Europäische Norm legt die Prüfmethoden und Annahme Kriterien an die Widerstandsfähigkeit gegenüber Verschleiss, Robustheit sowie Haltbarkeit von nicht umlaufenden Schutzeinrichtungen bei Gelenkwellen für den Zapfwellenantrieb fest, wie in Abschnitt 2 definiert.
Tracteurs et matériels agricoles et forestiers - Protecteur d'arbres de transmission à cardans de prise de force - Essai d'usure et de résistance
La présente norme européenne spécifie les méthodes d'essais et les critères d'acceptabilité permettant de déterminer la résistance à l'usure, la robustesse et la durabilité des protecteurs non toumants d'arbres de transmission à cardans de prise de force, tels que définis à l'article 2.
Traktorji, kmetijski in gozdarski stroji - Ščitniki za priključne gredi - Preskus obrabe in trdnosti
General Information
- Status
- Withdrawn
- Publication Date
- 19-Jun-1994
- Withdrawal Date
- 29-Feb-2004
- Technical Committee
- CEN/TC 144 - Tractors and machinery for agriculture and forestry
- Drafting Committee
- CEN/TC 144/WG 1 - General safety requirements
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Mar-2004
- Completion Date
- 01-Mar-2004
- Directive
- 89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
- Directive
- 98/37/EC - Machinery
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Control Union Certifications
Global certification for agriculture and sustainability.
ECOCERT
Organic and sustainability certification.
Rainforest Alliance Certification
Sustainable agriculture and forestry certification.
Sponsored listings
Frequently Asked Questions
EN 1152:1994 is a standard published by the European Committee for Standardization (CEN). Its full title is "Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive shafts - Wear and strength tests". This standard covers: This European Standard specifies the test methods and acceptance criteria for determining resistance against wear, robustness and durability of non rotating guards for power take-off (PTO) drive shafts as defined in clause 2. Pending the results of work being conducted in CEN on this subject matter, the requirements and test methods relative to the ultraviolet radiation resistance of such guards when they are manufactured in plastics materials are not dealt with in this standard. Such equipment is part of world-wide trade, which implies re-export of PTO drive-shafts to countries with extreme temperature, therefore a temperature of - 35 øC has been specified for some tests.
This European Standard specifies the test methods and acceptance criteria for determining resistance against wear, robustness and durability of non rotating guards for power take-off (PTO) drive shafts as defined in clause 2. Pending the results of work being conducted in CEN on this subject matter, the requirements and test methods relative to the ultraviolet radiation resistance of such guards when they are manufactured in plastics materials are not dealt with in this standard. Such equipment is part of world-wide trade, which implies re-export of PTO drive-shafts to countries with extreme temperature, therefore a temperature of - 35 øC has been specified for some tests.
EN 1152:1994 is classified under the following ICS (International Classification for Standards) categories: 65.060.10 - Agricultural tractors and trailed vehicles. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1152:1994 has the following relationships with other standards: It is inter standard links to EN ISO 5674:2004, EN ISO 5674:2006, EN 1152:1994/AC:1998. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1152:1994 is associated with the following European legislation: EU Directives/Regulations: 89/392/EEC, 98/37/EC; Standardization Mandates: M/BC/CEN/91/1. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1152:1994 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Traktoren und Maschinen für die Land- und Forstwirtschaft - Schutzeinrichtungen für Gelenkwellen - Verschleißprüfungen und FestigkeitsprüfungenTracteurs et matériels agricoles et forestiers - Protecteur d'arbres de transmission a cardans de prise de force - Essai d'usure et de résistanceTractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive shafts - Wear and stre
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...