Explosives for civil uses - Detonating cords and safety fuses - Part 5: Determination of resistance to abrasion of detonating cords

This European Standard describes the method for determining the resistance of the coating of flexible plastic-coated detonating cords and flexible fibrous-overbraided detonating cords, for civil use to failure when subjected to abrasion.

Explosivstoffe für zivile Zwecke - Sprengschnüre und Sicherheitsanzündschnüre - Teil 5: Bestimmung der Widerstandsfähigkeit von Sprengschnüren gegenüber Abrieb

Die vorliegende Norm legt das Verfahren zur Bestimmung der Festigkeit der Umhüllung von Sprengschnüren gegen Beschädigung fest, wenn diese auf Abrieb beansprucht werden.

Explosifs à usage civil - Cordeaux détonants et mèches de sûreté - Partie 5 : Détermination de la résistance à l'abrasion des cordeaux détonants

La présente Norme européenne décrit la méthode de détermination de la résistance à la défaillance du revêtement des cordeaux détonants flexibles en revêtement plastique et des cordeaux détonants flexibles en fibres tressées destinés à un usage civil, lorsqu’ils sont soumis à l’abrasion.

Eksplozivi za civilno uporabo – Detonacijske in počasi goreče vžigalne vrvice – 5. del: Ugotavljanje odpornosti detonacijskih vrvic na abrazijo

General Information

Status
Withdrawn
Publication Date
16-Dec-2003
Withdrawal Date
07-Oct-2025
ICS
71.100.30 - Explosives. Pyrotechnics and fireworks
Technical Committee
CEN/TC 321 - Explosives for civil uses
Drafting Committee
CEN/TC 321/WG 3 - Detonating cords, safety fuses and other fuses
Current Stage
9093 - Decision to confirm - Review Enquiry
Start Date
30-Jul-2015
Completion Date
08-Oct-2025
Directive
2014/28/EU - Directive 2014/28/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market and supervision of explosives for civil uses
93/15/EEC - Council Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses
Mandate
M/055 - Standardization mandate to CEN for explosives for civil uses
Ref Project
SIST EN 13630-5:2004 - Explosives for civil uses - Detonating cords and safety fuses - Part 5: Determination of resistance to abrasion of detonating cords

Relations

Replaced By
EN 13630-5:2025 - Explosives for civil uses - Detonating cords and safety fuses - Part 5: Verification of resistance to abrasion of detonating cords
Effective Date
19-Jan-2023

Frequently Asked Questions

EN 13630-5:2003 is a standard published by the European Committee for Standardization (CEN). Its full title is "Explosives for civil uses - Detonating cords and safety fuses - Part 5: Determination of resistance to abrasion of detonating cords". This standard covers: This European Standard describes the method for determining the resistance of the coating of flexible plastic-coated detonating cords and flexible fibrous-overbraided detonating cords, for civil use to failure when subjected to abrasion.

This European Standard describes the method for determining the resistance of the coating of flexible plastic-coated detonating cords and flexible fibrous-overbraided detonating cords, for civil use to failure when subjected to abrasion.

EN 13630-5:2003 is classified under the following ICS (International Classification for Standards) categories: 71.100.30 - Explosives. Pyrotechnics and fireworks. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 13630-5:2003 has the following relationships with other standards: It is inter standard links to EN 13630-5:2025. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 13630-5:2003 is associated with the following European legislation: EU Directives/Regulations: 2014/28/EU, 93/15/EEC; Standardization Mandates: M/055. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN 13630-5:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Explosives for civil uses - Detonating cords and safety fuses - Part 5: Determination of resistance to abrasion of detonating cordsExplosifs a usage civil - Cordeaux détonants et meches de sureté - Partie 5: Détermination de la résistance a l'abrasion des cordeaux détonantsExplosivstoffe für zivile Zwecke - Sprengschnüre und Sicherheitsanzündschnüre - Teil 5: Bestimmung der Widerstandsfähigkeit von Sprengschnüren gegenüber AbriebTa slovenski standard je istoveten z:EN 13630-5:2003SIST EN 13630-5:2004en71.100.30Eksplozivi. PirotehnikaExplosives. PyrotechnicsICS:SLOVENSKI
STANDARDSIST EN 13630-5:200401-februar-2004

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13630-5December 2003ICS 71.100.30English versionExplosives for civil uses - Detonating cords and safety fuses -Part 5: Determination of resistance to abrasion of detonatingcordsExplosifs à usage civil - Cordeaux détonants et mèches desûreté - Partie 5: Détermination de la résistance àl'abrasion des cordeaux détonantsExplosivstoffe für zivile Zwecke - Sprengschnüre undSicherheitsanzündschnüre - Teil 5: Bestimmung derWiderstandsfähigkeit von Sprengschnüren gegenüberAbriebThis European Standard was approved by CEN on 10 November 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13630-5:2003: E

Range of applicability of the test method.10Annex B (normative)
Specification of grinding steel.11Annex C (informative)
Availability of abrasive strips.13Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.14
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...