71.100.30 - Explosives. Pyrotechnics and fireworks

This document provides guidance on the operation of fireworks displays by professional teams of people with specialized knowledge. It is not applicable to the use of theatrical pyrotechnic articles on stage, in filming locations, or any other locations. It is not applicable to displays that involve only fireworks of categories 1, 2 and 3.

This document specifies the test method for determination of the lead content in pyrotechnic compositions of fireworks by flame atomic absorption spectrophotometry, with a minimum detection limit of 10 mg/kg. It is generally recommended to perform a simple preliminary qualitative test to check whether a quantitative analysis is required.

This document specifies the preparation methods of the test samples for the qualitative and quantitative analysis of specific chemical substances in fireworks. The document applies to the following substances to be tested using ISO 22863 (all parts): — hexachlorobenzene; — lead and lead compounds; — arsenic or arsenic compounds; — mercury compounds; — chlorates; — white phosphorus; — picrates or picric acid; — zirconium with a particle size of less than 40 µm; — content of nitrogen in nitrocellu...view more

This document specifies the test method for the determination of hexachlorobenzene (HCB) in pyrotechnic compositions by gas chromatography. The limit of detection depends on the substance to be determined, the equipment used, the quality of chemicals used for the extraction of the sample, and the clean-up of the extract. Under the conditions specified in this document, a limit of detection of 1 mg/kg (expressed as dry matter) can be achieved.

ISO/TR 21865:2017 describes the relevant responsibilities of the involved manufacturers of fireworks articles and corresponding laboratories for the application of the ISO 25947 series and the ISO 26261 series. By applying this approach, a clear separation of the responsibilities of the manufacturers and the third party laboratories is achieved in order to demonstrate the conformity to the relevant safety specifications defined in these standards.

ISO 25947-4:2017 specifies test methods. It is applicable to fireworks in categories 1, 2 and 3 according to ISO 25947‑2.

ISO 25947-1:2017 defines various terms relating to the design, construction, primary packaging and testing of fireworks of categories 1, 2 and 3.

ISO 25947-3:2017 specifies the minimum labelling requirements for the article and primary or selection packaging of fireworks of the following types: - aerial wheels; - bangers; - batteries; - batteries requiring external support; - Bengal flames; - Bengal matches; - Bengal sticks; - Christmas crackers; - combinations; - combinations requiring external support; - compound fireworks; - crackling granules; - double bangers; - double flash bangers; - flash bangers; - flash pellets; - fountains; - g...view more

ISO 25947-2:2017 establishes a system for dividing fireworks into categories and types. It is applicable to fireworks in categories 1, 2 and 3. This document does not apply to category 4 fireworks except for Clause 4 and theatrical pyrotechnic articles which are designed for indoor and outdoor stage use, including film and television productions or similar use.

ISO 25947-5:2017 specifies requirements for the construction, performance and primary packaging of fireworks of category 1, 2 and 3 of the following types: - aerial wheels; - bangers; - batteries; - batteries requiring external support; - Bengal flames; - Bengal matches; - Bengal sticks; - Christmas crackers; - combinations; - combinations requiring external support; - compound fireworks; - crackling granules; - double bangers; - double flash bangers; - flash bangers; - flash pellets; - fountain...view more

ISO 26261-2:2017 specifies requirements for the construction, performance and protective packaging of Category 4 fireworks, as listed in ISO 26261‑1. ISO 26261-2:2017 does not apply for articles containing pyrotechnic compositions that include any of the following substances: - arsenic or arsenic compounds; - polychlorobenzenes; - lead or lead compounds (except for igniters); - mercury compounds; - white phosphorus; - picrates or picric acid. ISO 26261-2:2017 does not apply for theatrical pyrote...view more

ISO 26261-1:2017 provides terminology relating to the design, construction, primary packaging and testing of category 4 fireworks.

ISO 26261-4:2017 specifies the minimum labelling requirements and the mandatory instructions for use for Category 4 fireworks. This document does not apply for theatrical pyrotechnic articles which are designed for indoor or outdoor stage use, including film and television productions or similar use.

ISO 26261-3:2017 specifies test methods for fireworks of Category 4.

This European Standard defines various terms and specifies requirements, categorisation, test methods, minimum labelling requirements and end users documentation, for ignition devices (except ignition devices for vehicles) of the following generic types:
- Igniters,
- Components for pyrotechnic trains,
- Pyrotechnic Cords and fuses,
- Delay fuses,
- Fuzes.

This European Standard defines the terms and specifies the requirements, means of categorisation, test methods, minimum labelling requirements and instructions for use, for ignition devices (except ignition devices for pyrotechnic articles for vehicles) of the following generic types:
-  igniters;
-  components for pyrotechnic trains;
-  pyrotechnic Cords and fuses;
-  delay fuses;
-  fuzes.
NOTE   Safety fuses are subject to Directive 93/15/EEC and therefore not considered in this European ...view more

This European Standard defines various terms relating to the design, construction, primary packaging and testing of fireworks of categories 1, 2 and 3.

This European Standard specifies requirements for the construction, performance and primary packaging of fireworks of category 1, 2 and 3 of the following types: aerial wheels; bangers; batteries and combinations; batteries with external support; Bengal flames; Bengal matches; Bengal sticks; Christmas crackers; combinations; combinations with external support; compound fireworks; crackling granules; double bangers; flash bangers; flash pellets; fountains; ground movers; ground spinners; hand-hel...view more

This European Standard specifies test methods. It is applicable to fireworks in categories 1, 2 and 3 according to EN 15947-2.

This European Standard establishes a system for dividing fireworks into categories and types. It is applicable to fireworks in categories 1, 2 and 3.