EN 4165-013:2024

SLOVENSKI STANDARD
01-januar-2025
Aeronavtika - Konektorji, električni, pravokotni, modularni - Stalna delovna
temperatura 175 °C - 013. del: Kabelske objemke z 2 ali 4 moduli za konektorje,
serija 2 in serija 3 - Standard za proizvod
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature
175 °C continuous - Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and
series 3 - Product standard
Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise,
Betriebstemperatur 175 °C konstant - Teil 013: Gehäuse mit Zugentlastung für
Steckverbinder mit 2 und 4 Modulen, Serie 2 und Serie 3 - Produktnorm
Série aérospatiale - Connecteurs électriques rectangulaires modulaires - Température
d'utilisation 175 °C continu - Partie 013 : Serre-câbles 2 et 4 modules pour connecteurs,
série 2 et série 3 - Norme de produit
Ta slovenski standard je istoveten z: EN 4165-013:2024
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 4165-013
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2024
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 4165-013:2016
English Version
Aerospace series - Connectors, electrical, rectangular,
modular - Operating temperature 175 °C continuous - Part
013: Cable clamp 2 and 4 modules for connectors, series 2
and series 3 - Product standard
Série aérospatiale - Connecteurs électriques Luft- und Raumfahrt - Elektrischer
rectangulaires modulaires - Température d'utilisation Rechtecksteckverbinder in modularer Bauweise -
175 °C continu - Partie 013 : Serre-câbles 2 et 4 Betriebstemperatur 175 °C konstant - Teil 013:
modules pour connecteurs, série 2 et série 3 - Norme Gehäuse mit Zugentlastung für Steckverbinder mit 2
de produit und 4 Modulen, Serie 2 und Serie 3 - Produktnorm
This European Standard was approved by CEN on 5 February 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4165-013:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
5 Cable clamp . 4
5.1 For 2 modules classes W and F . 4
5.2 For 4 modules classes W and F . 5
5.3 For 2 modules class C. 6
5.4 For 4 modules class C. 7
5.5 Cable clamp class . 8
5.6 Intermateability for series 2 and series 3 . 8
6 Designation .
...