ASD-STAN/D 2/S 3 - Elements of Connection (Connectors, Contacts, rear accessories, crimping tools

This document specifies the oval chimneys for accessories for accessories used in the family of rectangular electrical connectors, operating temperature 175 °C continuous.
The connector accessory body corresponding to those oval chimneys is specified in EN 4165-014.

This document specifies accessories of single modules connectors according to EN 4165 024 and EN 4165 025 used in the family of rectangular electrical connectors, operating temperature 175 °C continuous.

This document specifies cable clamps for 2 and 4 module connectors, series 2 and series 3 used in the family of rectangular electrical connectors, operating temperature 175 °C continuous.

This document specifies the flange mounting receptacles 2 and 4 modules, series 2 used in the family of rectangular electrical connectors, operating temperature 175 °C continuous.
The plugs, flight caps and accessories corresponding to those receptacles are specified in EN 4165-002.

This document specifies the blank chimneys (1 per module cavity) for accessories used in the family of rectangular electrical connectors, operating temperature 175 °C continuous.
The connector accessory body corresponding to those blank chimneys is specified in EN 4165-014.

This document specifies the rack and panel plug for 2 and 4 modules, series 2 used in the family of rectangular electrical connectors, operating temperature 175 °C continuous. The receptacles and accessories corresponding to those plugs are specified in EN 4165-002.

This document specifies the rack and panel rear mounted plug 2 and 4 modules, series 2 used in the family of rectangular electrical connectors, operating temperature 175 °C continuous. The receptacles and accessories corresponding to those plugs are specified in EN 4165-002.

This document specifies the plug series 3, for 2 and 4 modules used in the family of rectangular electrical connectors, operating temperature 175 °C continuous. The receptacles and accessories corresponding to those plugs are specified in EN 4165 002.

This document specifies the stackable mounting receptacles series 3, for 2 or 4 modules used in the family of rectangular electrical modular connectors, operating temperature 175 °C continuous. The plugs, flight caps and accessories corresponding to those receptacles are specified in EN 4165 002.

This document specifies the plugs series 2, for 2 and 4 modules used in the family of rectangular electrical connectors, operating temperature 175 °C continuous. The receptacles and accessories corresponding to those plugs are specified in EN 4165 002.

This document specifies the single module plug used in the family of rectangular electrical connectors, operating temperature 175 °C continuous. The receptacles and accessories corresponding to this plug are specified in EN 4165-002. The cavity of this connector is uncoded, so it can accept polarized modules N, A, B, C and D as specified in EN 4165-002.

This document specifies the characteristics of jam-nuts for jam-nut receptacles in the family of circular electrical connectors coupled by threaded ring.
It is applicable to classes specified in Table 3.
For receptacles using these jam-nuts, see EN 2997-004, and EN 2997-006 for class SE only.

This document provides a list of removable sealing sleeves as defined in the product standards for use in connectors or other electrical elements of connection.

This document specifies the characteristics of hermetic jam-nut mounted receptacles in the family of circular electrical connectors coupled by threaded ring.
It is applicable to the class specified in Table 4.
For plugs and protective covers, see EN 2997-008 and EN 2997-009 respectively. For spare jam-nuts and O-rings, see EN 2997-012 and EN 2997-013 respectively.

This document specifies the characteristics of jam-nut mounted receptacles in the family of circular electrical connectors coupled by threaded ring.
It is applicable to the class specified in Table 4.
For contacts, filler plugs, and rear accessories associated with this receptacle, see EN 2997-002. For plugs and protective covers, see EN 2997-008 and EN 2997-009 respectively. For spare jam-nuts and o-rings, see EN 2997-012 and EN 2997-013 respectively.

This document specifies methods of measuring thickness of electro-deposited gold or gold alloys coatings on contacts of elements of connection.

This document specifies methods of verifying adhesion of electrodeposited gold and gold alloy coatings on contacts.

This document defines a number of conditions common to rectangular electrical modular connectors for receptacles, plugs and rack and panel, with interchangeable modules and continuous operating temperature 175 °C.

This document specifies the performance and contact arrangements of circular electrical connectors, coupled by threaded ring. It also lists the product standards and models available for selection in this series.

This document defines a range of cable outlets, style K, 90°, shielded, sealed, self-locking (anti rotational) for heat shrinkable boot, and or with metallic bands under the following conditions.
The mating connectors are listed in EN 3660-002.
Temperature range,
Class N : -65 °C to 200 °C;
Class K : -65 °C to 260 °C;
Class W : -65 °C to 175 °C;
Class T : -65 °C to 175 °C (Nickel PTFE plating);
Class Z : -65 °C to 175 °C (Black zinc nickel plating).
Associated electrical accessories : EN 3660-033 Metallic band (for shield termination).
These cable outlets are designed for termination of overall shielding braid and/or individual cable shields. They accommodate/permit the termination of heat shrinkable boots.

This product standard defines a range of cable outlets, style K, 90°, shielded, sealed, self-locking (antirotational), for heat shrinkable boot, and/ or metallic bands for use under the following conditions:
The mating connectors are listed in EN 3660-002.
Temperature range, Class N : − 65 °C to 200 °C;
Class K : − 65 °C to 260 °C;
Class W : − 65 °C to 175 °C;
Class T : − 65 °C to 175 °C (Nickel PTFE plating);
Class Z : − 65 °C to 175 °C (Black zinc nickel plating).
Associated electrical accessories: EN 3660-033 Metallic band (for shield termination).
These cable outlets are designed for termination of overall shielding braid and/or individual cable
shields. They accommodate/permit the termination of heat shrinkable boots.

This product standard defines a range of cable outlets, style K, straight, shielded, sealed, self-locking (anti-rotational), heat shrinkable boot, and / or metallic bands for use under the following conditions:
The mating connectors are listed in EN 3660-002.
Temperature range,   
Class N   :   - 65 °C to 200 °C;
Class K   :   - 65 °C to 260 °C;
Class W   :   - 65 °C to 175 °C;
Class T   :   - 65 °C to 175 °C (Nickel PTFE plating);
Class Z   :    - 65 °C to 175 °C (Black zinc nickel plating).
Associated electrical accessories: EN 3660-033 Metallic band (for shield termination).
These cable outlets are designed for termination of overall shielding braid and / or individual cable shields. They accommodate/permit the termination of heat shrinkable boots.

This product standard defines a range of cable outlets, style K, straight, shielded, sealed, self-locking (anti-rotational), heat shrinkable boot, and / or metallic bands for use under the following conditions:
Associated electrical connector(s) EN 3660-002.
Temperature range,   Class N   :   - 65 °C to 200 °C;
Class K   :   - 65 °C to 260 °C;
Class W   :   - 65 °C to 175 °C;
Class T   :   - 65 °C to 175 °C (Nickel PTFE plating);
Class Z   :    - 65 °C to 175 °C (Black zinc nickel plating).
Associated electrical accessories: EN 3660-033 Metallic band (for shield termination).
These cable outlets are designed for termination of overall shielding braid and/or individual cable shields. They accommodate/permit the termination of heat shrinkable boots.

This document specifies the required characteristics, tests and tooling applicable to female electrical
quadrax contacts, shielded, size 8, type E characteristic impedance 100 Ω, crimp, class R, used in
elements of connection according to EN 3155-002.
It is used together with EN 3155-001.
The associated male contacts are defined in EN 3155-074

This document specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for threaded ring coupling circular connectors, fire resistant, intended for use in a temperature range from -65 °C to 175 °C continuous or 200 °C continuous according to the classes.

This document specifies a range of grommet nuts, style A, for use under the following conditions:
Associated electrical connector(s): EN 3660 002
Temperature range,   Class N:   −65 °C to 200 °C
   Class W:   −65 °C to 175 °C
   Class K:   −65 °C to 260 °C
   Class A:   −65 °C to 200 °C
   Class T:   −65 °C to 175 °C
   Class Z:   −65 °C to 175 °C

This document specifies a range of cable outlets, style A, 90°, unsealed with clamp strain relief for use under the following conditions:
Associated electrical connector(s): EN 3660 002
Temperature range,   Class N:   −65 °C to 200 °C
   Class W:   −65 °C to 175 °C
   Class K:   −65 °C to 260 °C
   Class A:   −65 °C to 260 °C
   Class T:   −65 °C to 175 °C (nickel PTFE plating)
   Class Z:   −65 °C to 175 °C (black zinc nickel plating)

This document specifies a range of cable outlets, style A, straight, unsealed with clamp strain relief for use under the following conditions:
Associated electrical connector(s): EN 3660 002
Temperature range,   Class N:   −65 °C to 200 °C
   Class W:   −65 °C to 175 °C
   Class K:   −65 °C to 260 °C
   Class A:   −65 °C to 200 °C
   Class T:   −65 °C to 175 °C (nickel PTFE plating)
   Class Z:   −65 °C to 175 °C (black zinc nickel plating)

This document provides a list of removable crimped contacts as specified in the product standards, with wrapped or soldered connections, etc. for use in connectors or other electrical elements of connection. It shows the elements of connection in which they are used.

This document specifies the characteristics of dummy receptacles in the family of circular electrical connectors coupled by threaded ring.
It applies to the class defined in Table 3.
For plugs associated with these dummy receptacles, see EN 2997-008.

This document defines the insertion/extraction tool for removal of modules used in the family of rectangular electrical connectors.

This document specifies the required characteristics and tests applicable to female electrical contacts 081, type A, crimp, class T, used in elements of connection according to EN 3155 002.
It shall be used together with EN 3155 001.
The associated male contacts are defined in EN 3155 080

This document specifies the required characteristics and tests applicable to female electrical contacts 079, type A, crimp, class S, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated male contacts are defined in EN 3155-078.

This document specifies the required characteristics and tests applicable to male electrical contacts 080, type A, crimp, class T, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated female contacts are defined in EN 3155-081.

This European Standard defines cable outlet accessories for use with circular and rectangular, electrical and optical connectors on aerospace equipment. These may be sealed or unsealed and include accessories suitable for the suppression of radio frequency and electromagnetic interference.
This European Standard is used in conjunction with circular and rectangular electrical and optical connectors for varying temperature ranges, environmental conditions, fire resistant and non-fire resistant applications as designated in the product standards.

This European Standard specifies the required characteristics and tests applicable to male electrical contacts 078, type A, crimp, class S, used in elements of connection according to EN 3155 002.
It shall be used together with EN 3155-001.
The associated female contacts are defined in EN 3155-079.

This European Standard specifies the required characteristics, tests and tooling applicable to female electrical contacts 015, type A, crimp, class S, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated male contacts are defined in EN 3155-014

This European Standard specifies the required characteristics, tests and tooling applicable to male electrical contacts 014, type A, crimp, class S, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated female contacts are defined in EN 3155-015.

This European Standard specifies the required characteristics, tests and tooling applicable to female electrical contacts 082, type A, crimp, class S used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated male contacts are defined in EN 3155-008 and EN 3155-070.

2020-01-20: Originator of XML version: NEN (on behalf of NEN, ASI, DS, SFS, SIS, SN)

This European Standard specifies the characteristics of screwed on coupling (N interface) coaxial right angle plugs - 50 ohms. The cable to connector assembly is a crimp technology.

This European Standard specifies the characteristics of screwed on coupling (TNC interface) coaxial square flange receptacle - 50 ohms. The cable to connector assembly is crimp technology.

This European Standard specifies the characteristics of screwed on coupling (N interface) coaxial straight plugs  50 ohms. The cable to connector assembly is a crimp technology.

This European Standard specifies the list of product standards and common characteristics of connectors, coaxial, radio frequency for use in electrical systems of aircraft.

This European Standard specifies the characteristics of screwed on coupling (TNC interface) coaxial straight plugs - 50 ohms.
These connectors are foreseen for light weight coaxial cables; so, appropriate sealing have to be achieved.

This document specifies connectors with female contacts in the family of rectangular electrical connectors with sealed and non-sealed rear, plastic housing, locking device, for operating temperatures from −55 °C to 175 °C.
These connectors may be used as receptacles (fixed housings) or plugs (free housings) in conjunction with the following coding and attachment system:
-   male coding and attachment system for mounting on a fixed housing;
-   female coding and attachment system for mounting on a free housing.

This document specifies connectors with male contacts in the family of rectangular electrical connectors with sealed and non-sealed rear, plastic shell, locking device, for operating temperatures from −55 °C to 175 °C.
These connectors may be used as receptacles (fixed housings) or plugs (free housings) in conjunction with the following coding and attachment system:
-   male coding and attachment system for mounting on a fixed housing;
-   female coding and attachment system for mounting on a free housing.

This document specifies the female coding and attachment system for mounting on free housing in the family of rectangular electrical connectors with sealed and non-sealed rear, plastic housing, locking device, for operating temperatures from -55 °C to 175 °C.

This document specifies the protective cover for all receptacles series 2 and series 3  used in the family of rectangular electrical connectors.
The receptacle connectors corresponding to those protective covers are specified in EN 4165 004, EN 4165 011 and EN 4165 025.