EN 10028-5:1996

EN 10028-5:1996 is a standard published by the European Committee for Standardization (CEN). Its full title is "Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled". This standard covers: This part of EN 10028 specifies the requirements for flat products for pressure equipments made of themomechanically rolled steels as listed in table 1. The steels are not suitable for hot forming. NOTE: Until now insufficient data for the standardization of the elevated temperature properties of these steels are available. If their use at such temperatures is intended the conditions for this shall be especially agreed between the interested parties. Other parts of this European Standard are: EN 10028-1 Flat products made of steels for pressure purposes - General requirements EN 10028-2 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties EN 10028-3 Flat producs made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized EN 10028-4 Flat products made of steels for pressure purposes - Part 4: Nickel-alloy steels with specified low temperature properties EN 10028-6 Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered EN 10028-7 Flat products made of steels for pressure purposes - Part 7: Stainless steels

This part of EN 10028 specifies the requirements for flat products for pressure equipments made of themomechanically rolled steels as listed in table 1. The steels are not suitable for hot forming. NOTE: Until now insufficient data for the standardization of the elevated temperature properties of these steels are available. If their use at such temperatures is intended the conditions for this shall be especially agreed between the interested parties. Other parts of this European Standard are: EN 10028-1 Flat products made of steels for pressure purposes - General requirements EN 10028-2 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties EN 10028-3 Flat producs made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized EN 10028-4 Flat products made of steels for pressure purposes - Part 4: Nickel-alloy steels with specified low temperature properties EN 10028-6 Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered EN 10028-7 Flat products made of steels for pressure purposes - Part 7: Stainless steels

EN 10028-5:1996 is classified under the following ICS (International Classification for Standards) categories: 77.140.50 - Flat steel products and semi-products. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 10028-5:1996 has the following relationships with other standards: It is inter standard links to EN 10028-5:2003, CR 10313:2000. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 10028-5:1996 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN 10028-5:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.