EN 364:1992/AC:1993

Overview

EN 364:1992/AC:1993 - adopted in Slovenia as SIST EN 364:1996 - is a CEN standard titled Personal protective equipment against falls from a height - Test methods. The document defines standardized test methods used to evaluate components and assemblies of fall‑protection personal protective equipment (PPE). It provides a common technical basis for laboratories, manufacturers and certification bodies to verify performance, safety and conformity of fall‑arrest products.

Key topics

Although the original document text here is limited to bibliographic details, EN 364 typically addresses the following technical topics and requirements (described at a high level):

• Standardized test procedures for evaluating PPE performance under controlled conditions.
• Sample preparation and conditioning, including environmental and pre‑test treatments to ensure repeatability.
• Mechanical tests such as static load tests, dynamic impact or drop tests, and fatigue or cyclic loading where applicable.
• Component and assembly checks covering harnesses, connectors, lanyards, energy absorbers, anchor devices and related items.
• Test instrumentation and reporting requirements to ensure consistent measurement and documentation of results.
• Acceptance criteria and failure reporting to support conformity assessment and product certification.

(Note: EN 364 is a methods standard - it defines how tests are performed rather than prescribing product performance limits. Performance criteria are defined in the specific product standards.)

Applications

EN 364 test methods are referenced across the fall‑protection product lifecycle and are useful for:

• Manufacturers developing and validating harnesses, lanyards, connectors, energy absorbers and anchor systems.
• Independent test laboratories performing type tests, routine testing and conformity assessment.
• Notified bodies and certification agencies assessing compliance with European PPE directives.
• Safety managers and procurement teams who require evidence of standardized testing when selecting fall‑protection equipment.
• Regulators and inspectors seeking harmonized test evidence to support enforcement and product approval.

Related standards

EN 364 is commonly used together with product‑specific EN standards in the fall‑arrest family, for example:

• EN 361 (full body harnesses)
• EN 362 (connectors)
• EN 354/355 (lanyards and energy absorbers)
• EN 358 / EN 353 (work positioning and guided fall arresters)

Keywords for search

EN 364, SIST EN 364:1996, fall protection test methods, PPE fall arrest testing, CEN standard, personal protective equipment against falls

If you need a link to the official standard text or to identify the specific test procedures referenced by EN 364, I can help locate the appropriate EN documents or point you to national adoption resources.