EN 12150-1:2015/FprA1
(Amendment)Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description
Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description
This European Standard specifies tolerances, flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat thermally toughened soda lime silicate safety glass for use in buildings.
Information on curved thermally toughened soda lime silicate safety glass is given in Annex A, but this product does not form part of this European Standard.
Other requirements, not specified in this European Standard, can apply to thermally toughened soda lime silicate safety glass which is incorporated into assemblies, e.g. laminated glass or insulating glass units, or undergo an additional treatment, e.g. coating. The additional requirements are specified in the appropriate glass product standard. Thermally toughened soda lime silicate safety glass, in this case, does not lose its bending strength characteristics and its resistance to temperature differentials.
Surface finished glasses (e.g. sandblasted, acid etched) after toughening are not covered by this European Standard.
Glas im Bauwesen - Thermisch vorgespanntes Kalknatron-Einscheiben-Sicherheitsglas - Teil 1: Definition und Beschreibung
Verre dans la construction - Verre de silicate sodo-calcique de sécurité trempé thermiquement - Partie 1: Définition et description
Steklo v gradbeništvu - Toplotno kaljeno natrij-kalcijevo silikatno varnostno steklo - 1. del: Definicija in opis
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 12150-1:2015/oprA1:2017
01-september-2017
Steklo v gradbeništvu - Toplotno kaljeno natrij-kalcijevo silikatno varnostno steklo
- 1. del: Definicija in opis
Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition
and description
Glas im Bauwesen - Thermisch vorgespanntes Kalknatron-Einscheiben-Sicherheitsglas -
Teil 1: Definition und Beschreibung
Verre dans la construction - Verre de silicate sodo-calcique de sécurité trempé
thermiquement - Partie 1: Définition et description
Ta slovenski standard je istoveten z: EN 12150-1:2015/prA1
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
SIST EN 12150-1:2015/oprA1:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN 12150-1:2015/oprA1:2017
SIST EN 12150-1:2015/oprA1:2017
DRAFT
EUROPEAN STANDARD
EN 12150-1:2015
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
May 2017
ICS 81.040.20
English Version
Glass in building - Thermally toughened soda lime silicate
safety glass - Part 1: Definition and description
Verre dans la construction - Verre de silicate sodo- Glas im Bauwesen - Thermisch vorgespanntes
calcique de sécurité trempé thermiquement - Partie 1: Kalknatron-Einscheiben-Sicherheitsglas - Teil 1:
Définition et description Definition und Beschreibung
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 129.
This draft amendment A1, if approved, will modify the European Standard EN 12150-1:2015. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12150-1:2015/prA1:2017 E
worldwide for CEN national Members.
SIST EN 12150-1:2015/oprA1:2017
EN 12150-1:2015/prA1:2017 (E)
Contents Page
European foreword .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.