EN 374-1:1994
(Main)Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements
Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements
This standard specifies the requirements for gloves to protect the user against chemicals and/or micro-organisms and defines terms to be used. This standard shall be used in conjunction with EN 420. This standard does not specify requirements for protection against any mechanical hazards. However, there is a requirement for data to be reported on the following mechanical tests: Abrasion, blade cut, tearing resistance and puncture according to the test methods described in EN 388:1993, clauses 6.1, 6.2, 6.3 and 6.4 respectively. This standard does not specify any requirements for protection against thermal or ionizing radiation hazards. If the use requires these types of protection, reference should be made to EN 407 and EN 421 respectively.
Schutzhandschuhe gegen Chemikalien und Mikroorganismen - Teil 1: Terminologie und Leistungsanforderungen
Diese Norm legt Anforderungen an Handschue fest, die den Benutzer gegen Chemikalien und/oder Mikroorganismen schützen und definiert die gebräuchlichen Begriffe. Diese Norm ist in Verbindung mit prEN 420 'Allgemeine Anforderungen für Handschuhé anzuwenden.
Gants de protection contre les produits chimiques et les micro-organismes - Partie 1: Terminologie et performances requises
La présente norme spécifie les performances requises pour les gants destinés à la protection des utilisateurs contre les produits chimiques et/ou les micro-organismes et définit les termes à utiliser. Cette norme doit être utilisée en liaison avec le prEN 420 'Exigences générales pour les gants'.
Varovalne rokavice za zaščito pred kemikalijami in mikroorganizmi - 1. del: Terminologija in zahteve za izdelavo
General Information
- Status
- Withdrawn
- Publication Date
- 16-Jan-1994
- Withdrawal Date
- 09-Sep-2003
- Technical Committee
- CEN/TC 162 - Protective clothing including hand and arm protection and lifejackets
- Drafting Committee
- CEN/TC 162/WG 8 - Protective gloves
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 10-Sep-2003
- Completion Date
- 10-Sep-2003
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
NSF International
Global independent organization facilitating standards development and certification.
CIS Institut d.o.o.
Personal Protective Equipment (PPE) certification body. Notified Body NB-2890 for EU Regulation 2016/425 PPE.
Kiwa BDA Testing
Building and construction product certification.
Sponsored listings
Frequently Asked Questions
EN 374-1:1994 is a standard published by the European Committee for Standardization (CEN). Its full title is "Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements". This standard covers: This standard specifies the requirements for gloves to protect the user against chemicals and/or micro-organisms and defines terms to be used. This standard shall be used in conjunction with EN 420. This standard does not specify requirements for protection against any mechanical hazards. However, there is a requirement for data to be reported on the following mechanical tests: Abrasion, blade cut, tearing resistance and puncture according to the test methods described in EN 388:1993, clauses 6.1, 6.2, 6.3 and 6.4 respectively. This standard does not specify any requirements for protection against thermal or ionizing radiation hazards. If the use requires these types of protection, reference should be made to EN 407 and EN 421 respectively.
This standard specifies the requirements for gloves to protect the user against chemicals and/or micro-organisms and defines terms to be used. This standard shall be used in conjunction with EN 420. This standard does not specify requirements for protection against any mechanical hazards. However, there is a requirement for data to be reported on the following mechanical tests: Abrasion, blade cut, tearing resistance and puncture according to the test methods described in EN 388:1993, clauses 6.1, 6.2, 6.3 and 6.4 respectively. This standard does not specify any requirements for protection against thermal or ionizing radiation hazards. If the use requires these types of protection, reference should be made to EN 407 and EN 421 respectively.
EN 374-1:1994 is classified under the following ICS (International Classification for Standards) categories: 01.040.13 - Environment. Health protection. Safety (Vocabularies); 13.340.40 - Hand and arm protection. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 374-1:1994 has the following relationships with other standards: It is inter standard links to EN 374-1:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 374-1:1994 is associated with the following European legislation: EU Directives/Regulations: 89/686/EEC; Standardization Mandates: M/BC/CEN/88/8. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 374-1:1994 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schutzhandschuhe gegen Chemikalien und Mikroorganismen - Teil 1: Terminologie und LeistungsanforderungenGants de protection contre les produits chimiques et les micro-organismes - Partie 1: Terminologie et performances requisesProtective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements1
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...