iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 4895:2014

(Main)

Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:2014)

Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:2014)

ISO 4895:2014 specifies a method for determining the tendency of liquid epoxy resins to crystallize. The tendency to crystallize is determined by observing, at specified time intervals, changes in fluidity and the onset of crystallization.

Kunststoffe - Flüssige Epoxidharze - Bestimmung der Kristallisationsneigung (ISO 4895:2014)

Diese Internationale Norm legt ein Verfahren zur Bestimmung der Kristallisationsneigung flüssiger Epoxidharze fest. Die Kristallisationsneigung wird bestimmt, indem Änderungen in der Fluidität und der Beginn der Kristallisation in bestimmten Zeitintervallen beobachtet werden.

Plastiques - Résines époxydes liquides - Détermination de la tendance à la cristallisation (ISO 4895:2014)

L'ISO 4895:2014 spécifie une méthode de détermination de la tendance à la cristallisation des résines époxy liquides. Cette tendance à cristalliser se détermine par observation, à intervalles de temps donnés, des variations de la fluidité et d'apparition de la cristallisation.

Polimerni materiali - Tekoče epoksidne smole - Ugotavljanje nagnjenosti h kristalizaciji (ISO 4895:2014)

Ta mednarodni standard določa postopek ugotavljanja nagnjenosti tekočih epoksidnih smol h kristalizaciji. Nagnjenost h kristalizaciji se določi z opazovanjem sprememb v fluidnosti in opazovanjem nastanka kristalizacije v določenih časovnih intervalih.

General Information

Status
Published
Publication Date
15-Jul-2014
Withdrawal Date
30-Jan-2015
ICS
83.080.10 - Thermosetting materials
Technical Committee
CEN/TC 249 - Plastics
Drafting Committee
CEN/TC 249 - Plastics
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
16-Jul-2014
Completion Date
16-Jul-2014
Ref Project
SIST EN ISO 4895:2014 - Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:2014)

Relations

Replaces
EN ISO 4895:1999 - Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:1997)
Effective Date
23-Jul-2014

Buy Standard

EN ISO 4895:2014EN ISO 4895:2014
PreviousNext
Standard
EN ISO 4895:2014
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 4895:2014
01-oktober-2014
1DGRPHãþD
SIST EN ISO 4895:2000
3ROLPHUQLPDWHULDOL7HNRþHHSRNVLGQHVPROH8JRWDYOMDQMHQDJQMHQRVWLK
NULVWDOL]DFLML ,62
Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:2014)
Kunststoffe - Flüssige Epoxidharze - Bestimmung der Kristallisationsneigung (ISO
4895:2014)
Plastiques - Résines époxydes liquides - Détermination de la tendance à la cristallisation
(ISO 4895:2014)
Ta slovenski standard je istoveten z: EN ISO 4895:2014
ICS:
83.080.10 Duromeri Thermosetting materials
SIST EN ISO 4895:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 4895:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 4895:2014

EUROPEAN STANDARD
EN ISO 4895

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2014
ICS 83.080.10 Supersedes EN ISO 4895:1999
English Version
Plastics - Liquid epoxy resins - Determination of tendency to
crystallize (ISO 4895:2014)
Plastiques - Résines époxydes liquides - Détermination de Kunststoffe - Flüssige Epoxidharze - Bestimmung der
la tendance à la cristallisation (ISO 4895:2014) Kristallisationsneigung (ISO 4895:2014)
This European Standard was approved by CEN on 28 June 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4895:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 4895:2014
EN ISO 4895:2014 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 4895:2014
EN ISO 4895:2014 (E)
Foreword
This document (EN ISO 4895:2014) has been prepared by Technical Committee ISO/TC 61 "Plastics" in
collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2015, and conflicting national standards shall be withdrawn at
the latest by January 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4895:1999.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 4895:2014 has been approved by CEN as EN ISO 4895:2014 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 4895:2014

---------------------- Page: 6 ----------------------

SIST EN ISO 4895:2014
INTERNATIONAL ISO
STANDARD 4895
Third edition
2014-07-15
Plastics — Liquid epoxy resins
— Determination of tendency to
crystallize
Plastiques — Résines époxydes liquides — Détermination de la
tendance à la cristallisation
Reference number
ISO 4895:2014(E)
©
ISO 2014

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 3671:2023(Main)
Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:2023)
SIST EN ISO 3671:2023

This document specifies a method for the determination of volatile matter (predominantly water) in aminoplastic moulding materials, by drying in an oven.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 60:2023(Main)
Plastics - Determination of apparent density of material that can be poured from a specified funnel (ISO 60:2023)
SIST EN ISO 60:2023

This document specifies a method of determining the apparent density, i.e. the mass per unit of volume, of loose material (powder or granular material) that can be poured from a funnel of specified design.
NOTE            For a method of determining the apparent density of loose moulding material that cannot be poured from a specified funnel, see ISO 61.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 1628-5:2015(Main)
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers (ISO 1628-5:1998)
SIST EN ISO 1628-5:2015

See N895

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 75-2:2013(Main)
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
SIST EN ISO 75-2:2013

ISO 75-2:2013 specifies three methods, using different values of constant flexural stress, which can be used for the determination of the temperature of deflection under load of plastics (including filled plastics and fibre-reinforced plastics in which the fibre length, prior to processing, is up to 7,5 mm) and ebonite:
method A, using a flexural stress of 1,80 MPa;
method B, using a flexural stress of 0,45 MPa;
method C, using a flexural stress of 8,00 MPa.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3673-2:2012(Main)
Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
SIST EN ISO 3673-2:2012

ISO 3673-2:2012 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of crosslinked epoxy resins. The properties determined have been selected from the general test methods in ISO 10350‑1:2007.
Test methods for the determination of the properties of non-crosslinked epoxy resins are not included in this part of ISO 3673.
NOTE          Test methods for non-crosslinked epoxy resins are specified in ISO 18280.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 175:2010(Main)
Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
SIST EN ISO 175:2011

ISO 175:2010 specifies a method of exposing test specimens of plastic materials, free from all external restraint, to liquid chemicals, and methods for determining the changes in properties resulting from such immersion. It does not cover environmental stress cracking (ESC) which is dealt with by the various parts of ISO 22088.
It only considers testing by immersion of the entire surface of the test specimen.
It is applicable to all solid plastics that are available in the form of moulding or extrusion materials, plates, tubes, rods or sheets having a thickness greater than 0,1 mm. It is not applicable to cellular materials.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21627-2:2009(Main)
Plastics - Epoxy resins - Determination of chlorine content - Part 2: Easily saponifiable chlorine (ISO 21627-2:2009)
SIST EN ISO 21627-2:2009

ISO 21627-2:2009 specifies a method for the determination of easily saponifiable chlorine in epoxy resins.
The easily saponifiable chlorine content is the quantity of easily saponifiable chlorine in a given quantity of epoxy resin.
The values obtained are indicative of the concentration of easily saponifiable chlorine in chlorohydrin groups in the resin.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21627-1:2009(Main)
Plastics - Epoxy resins - Determination of chlorine content - Part 1: Inorganic chlorine (ISO 21627-1:2009)
SIST EN ISO 21627-1:2009

ISO 21627-1:2009 specifies a direct potentiometric method for the determination of inorganic chlorine in epoxy resins, also called “ionic chlorine”.
The inorganic chlorine content is expressed in milligrams per kilogram of epoxy resin.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21627-3:2009(Main)
Plastics - Epoxy resins - Determination of chlorine content - Part 3: Total chlorine (ISO 21627-3:2009)
SIST EN ISO 21627-3:2009

ISO 21627-3:2009 specifies a method for the determination of the total amount of chlorine in epoxy resins.
The chlorine measured by this method, referred to as total chlorine, includes saponifiable organic chlorine and inorganic chlorine.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14896:2009(Main)
Plastics - Polyurethane raw materials - Determination of isocyanate content (ISO 14896:2009)
SIST EN ISO 14896:2009

ISO 14896:2009 specifies two methods for the measurement of the isocyanate content of aromatic isocyanates used as polyurethane raw materials. Method A is primarily applicable to refined toluene diisocyanate (TDI), methylene-bis-(4-phenylisocyanate) (MDI) and their prepolymers. Method B is applicable to refined, crude or modified isocyanates derived from toluene diisocyanate, methylene-bis-(4-phenylisocyanate) and polymethylene polyphenylisocyanate. It can also be used for isomer mixtures of toluene diisocyanate, methylene-bis-(4-phenylisocyanate) and polymethylene polyphenylisocyanate. Other aromatic isocyanates may be analysed by this method if precautions are taken to verify suitability. It is not applicable to blocked isocyanates.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day