EN 13126-2:2021

SLOVENSKI STANDARD
01-julij-2021
Nadomešča:
SIST EN 13126-2:2011
Stavbno okovje - Okovje za okna in zastekljena vrata - Zahteve in preskusne
metode - 2. del: Okenska zapirala
Building hardware - Hardware for windows and door height windows - Requirements and
test methods - Part 2: Window fastener handles
Baubeschläge - Beschläge für Fenster und Fenstertüren - Anforderungen und
Prüfverfahren - Teil 2: Einreiberverschlüsse
Quincaillerie pour le bâtiment - Ferrures de fenêtres et portes-fenêtres - Exigences et
méthodes d'essai - Partie 2 : Poignées à ergot de verrouillage
Ta slovenski standard je istoveten z: EN 13126-2:2021
ICS:
91.190 Stavbna oprema Building accessories
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 13126-2
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2021
EUROPÄISCHE NORM
ICS 91.190 Supersedes EN 13126-2:2011
English Version
Building hardware - Hardware for windows and door
height windows - Requirements and test methods - Part 2:
Window fastener handles
Quincaillerie pour le bâtiment - Ferrures de fenêtres et Baubeschläge - Beschläge für Fenster und Fenstertüren
portes-fenêtres - Exigences et méthodes d'essai - Partie - Anforderungen und Prüfverfahren - Teil 2:
2 : Poignées à ergot de verrouillage Einreiberverschlüsse
This European Standard was approved by CEN on 8 February 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13126-2:2021 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Classification . 8
4.1 General . 8
4.2 Durability (1 – first box) . 8
4.3 Mass (2 – second box) . 8
4.4 Corrosion resistance (3 – third box) . 8
4.5 Test sizes (4 – fourth box) . 8
4.6 Security against burglar attack (5 – fifth box) . 8
4.7 Key related security (6 – sixth box) . 8
4.8 Example of classification for window fastener handles . 9
5 Requirements . 9
5.1 Dangerous substances . 9
5.2 Operating torque . 9
5.3 Torsion strength . 9
5.4 Tensile strength – eccentric . 10
5.5 Simulated pressure . 10
5.6 Pull-in . 10
5.7 Durability . 10
5.8 Security . 10
5.9 Corrosion resistance . 12
6 Test equipment and preparation for the test . 12
7 Test procedure . 12
7.1 Samples . 12
7.2 Operating torque test procedure . 13
7.3 Torsion strength test procedure . 13
7.4 Tensile strength test procedure – eccentric . 13
7.5 Simulated pressure test procedure . 13
7.6 Pull-in test . 14
7.7 Durability test procedure . 14
7.8 Security . 14
7.9 Corrosion resistance . 15
8 Marking . 16
Annex A (informative) Flow chart of test procedures . 17
Annex B (informative) Figures . 19
Bibliography . 22

European foreword
This document (EN 13126-2:2021) has been prepared by Technical Committee CEN/TC 33 “Doors,
windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2021, and conflicting national standards
shall be withdrawn at the latest by September 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13126-2:2011.
With regard to EN 13126-2:2011, the following significant changes were made:
— EN 13126-2 now is independent from EN 13126-1; all necessary information are included without
the need of any further information from EN 13126-1;
— several editorial changings in the wording for a better understanding;
— terms under 3.4 'locking mechanism”, 3.10 'sample', 3.11 'specimen' and 3.12 'test-rig' added; term
under 3.6 'key operated locking mechanism' modified for better understanding;
— under 4.1 classification system changed completely; former digits 1 (Category of use), 4 (Fire
resistance), 5 (Safety in use) and 8 (Application) deleted; former digit 2 changed into box 1
(Durability), former digit 3 changed into box 2 (Mass), former digit 6 changed into box 3 (Corrosion
resistance), former digit 9 changed into box 4 (Test sizes); former digit 7 changed into box 5
(Security against burglar attack), new box 6 (Key related security);
— under 4.2 new grades for the number of cycles defined; H1 (5 000), H2 (10 000) and H3 (20 000);
see also 5.7;
— under 4.8 new example added for the new classification;
— under 5.7 new grades for the number of cycles defined; H1 (5 000), H2 (10 000) and H3 (20 000) in
accordance with 4.2 established;
— under 5.8.1 former Table 2 deleted; all values are listed unchanged in the corresponding clauses
and subclauses;
— under 5.8.2 the number of cycles adapted to the newly defined grades for the durability;
— under 5.8.4 and 5.8.5 grade 3 added with 200 Nm;
— under 5.8.6 subclause for locking variations regarding key related security added;
— under 5.9 subclause for corrosion resistance added;
— under 6 headline modified with “…and preparation for the test”;
— under 7.8 sublause for security added with new structure;
— under Clause 8 new clause added regarding marking with information from the current version of
EN 13126-1.
This document is one of a series of European standards for building hardware products for windows
and door height windows. This document is independent of EN 13126-1.
EN 13126 consists of the following parts:
— EN 13126-1, Building hardware — Hardware for windows and door height windows — Requirements
and test methods — Part 1: Requirements common to all types of hardware;
— EN 13126-2, Building hardware — Hardware for windows and door height windows — Requirements
and test methods — Part 2: Window fastener handles;
— EN 13126-3, Building hardware — Hardware for windows and door-height windows — Requirements
and test methods — Part 3: Handles, primarily for Tilt and Turn, Tilt-First and Turn-Only hardware;
— EN 13126-4, Building hardware — Requirements and test methods for windows and door height
windows — Part 4: Espagnolettes;
— EN 13126-5, Building hardware — Hardware for windows and door height windows — Requirements
and test methods — Part 5: Devices that restrict the opening of windows and door height windows;
— EN 13126-6, Building hardware — Hardware for windows and door height windows — Requirements
and test methods — Part 6: Variable geometry stay hinges (with or without a friction stay);
— EN 13126-7, Building hardware — Requirements and test methods for windows and door height
windows — Part 7: Finger catches;
— EN 13126-8, Building hardware — Hardware for windows and door height windows — Part 8:
Requirements and test methods for tilt and turn, Tilt-First and Turn-Only hardware;
— EN 13126-9, Building hardware — Requirements and test methods for windows and door height
windows — Part 9: Hardware for horizontal and vertical pivot windows;
— EN 13126-10, Building hardware — Requirements and test methods for windows and door height
windows — Part 10: Arm-balancing systems;
— EN 13126-11, Building hardware — Requirements and test methods for windows and door height
windows — Part 11: Top hung projecting reversible hardware;
— EN 13126-12, Building hardware — Requirements and test methods for windows and door height
windows — Part 12: Side hung projecting reversible hardware;
— EN 13126-13, Building hardware — Hardware for windows and balcony door — Requirements and
test methods — Part 13: Sash balances;
— EN 13126-14, Building hardware — Hardware for windows and balcony door — Requirements and
test methods — Part 14: Sash fasteners;
— EN 13126-15, Building hardware — Hardware for windows and balcony door — Requirements and
test methods — Part 15: Rollers for sliding and hardware for sliding folding windows;
— EN 13126-16, Building hardware — Hardware for windows and balcony door — Requirements and
test methods — Part 16: Hardware for Lift and Slide windows;
— EN 13126-17, Building hardware — Hardware for windows and balcony door — Requirem
...