CEN/TR 17603-32-05:2022
(Main)Space engineering - Structural materials handbook - Part 5: New advanced materials, advanced metallic materials, general design aspects and load transfer and design of joints
Space engineering - Structural materials handbook - Part 5: New advanced materials, advanced metallic materials, general design aspects and load transfer and design of joints
The structural materials handbook, SMH, combines materials and design information on established polymer matrix composites with provisional information on the emerging groups of newer advanced materials and their composites. Design aspects are described, along with factors associated with joining and manufacturing. Where possible, these are illustrated by examples or case studies.
The Structural materials handbook contains 8 Parts.
A glossary of terms, definitions and abbreviated terms for these handbooks is contained in Part 8.
The parts are as follows:
Part 1 Overview and material properties and applications Clauses 1 ‐ 9
Part 2 Design calculation methods and general design aspects Clauses 10 ‐ 22
Part 3 Load transfer and design of joints and design of structures Clauses 23 ‐ 32
Part 4 Integrity control, verification guidelines and manufacturing Clauses 33 ‐ 45
Part 5 New advanced materials, advanced metallic materials, general design aspects and load transfer and design of joints Clauses 46 ‐ 63
Part 6 Fracture and material modelling, case studies and design and integrity control and inspection Clauses 64 ‐ 81
Part 7 Thermal and environmental integrity, manufacturing aspects, in‐orbit and health monitoring, soft materials, hybrid materials and nanotechnoligies Clauses 82 ‐ 107
Part 8 Glossary
NOTE: The 8 parts will be numbered TR17603-32-01 to TR 17603-32-08
Raumfahrttechnik - Handbuch der Konstruktionswerkstoffe - Teil 5: Neue fortschrittliche Werkstoffe, fortschrittliche metallische Werkstoffe, allgemeine Konstruktionsaspekte und Lastabtragung und Auslegung von Verbindungen
Ingénierie spatiale - Manuel des matériaux structuraux - Partie 5 : Matériaux avancés nouveaux, matériaux métalliques avancés, aspects généraux de conception, transferts des charges et conception des jonctions
Vesoljska tehnika - Priročnik o strukturnih materialih - 5. del: Novi napredni materiali, napredni kovinski materiali, splošni konstrukcijski vidiki ter prenos obremenitve in oblikovanje sklepov
Priročnik o strukturnih materialih, SMH, združuje informacije o materialih in oblikovanju uveljavljenih polimernih matričnih kompozitov z začasnimi informacijami o nastajajočih skupinah novejših naprednih materialov in njihovih kompozitov. Opisani so vidiki oblikovanja, skupaj z dejavniki združevanja in proizvodnje. Kjer je mogoče, so podani primeri ali študije primerov.
Priročnik o strukturnih materialih vsebuje 8 delov.
Slovar izrazov, opredelitve in okrajšave izrazov za te priročnike so v 8. delu.
Deli so:
1. del: Pregled in lastnosti materialov ter aplikacije Točke 1–9
2. del: Metode za izračun zasnove in splošni vidiki zasnove Točke 10–22
3. del: Prenos obremenitve ter projektiranje spojev in konstrukcij Točke 23–32
4. del: Nadzor integritete, smernice za preverjanje in proizvodnja Točke 33–45
5. del: Novi napredni materiali, napredni kovinski materiali, splošni konstrukcijski vidiki ter prenos obremenitve in oblikovanje sklepov Točke 46–63
6. del: Modeliranje zlomov in materialov, študije primerov, načrtovanje in nadzor integritete ter inšpekcijski pregled Točke 64–81
7. del: Toplotna in okoljska celovitost, proizvodni vidiki, spremljanje stanja materialov v orbiti, mehki materiali, hibridni materiali in nanotehnologije Točke 82–107
8. del: Slovar
OPOMBA: Teh 8 delov je označenih s številkami od TR17603-32-01 do TR 17603-32-08.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2022
Vesoljska tehnika - Priročnik o strukturnih materialih - 5. del: Novi napredni
materiali, napredni kovinski materiali, splošni konstrukcijski vidiki ter prenos
obremenitve in oblikovanje sklepov
Space engineering - Structural materials handbook - Part 5: New advanced materials,
advanced metallic materials, general design aspects and load transfer and design of
joints
Raumfahrttechnik - Handbuch der Konstruktionswerkstoffe - Teil 5: Neue fortschrittliche
Werkstoffe, fortschrittliche metallische Werkstoffe, allgemeine Konstruktionsaspekte und
Lastabtragung und Auslegung von Verbindungen
Ingénierie spatiale - Manuel des matériaux structuraux - Partie 5 : Matériaux avancés
nouveaux, matériaux métalliques avancés, aspects généraux de conception, transferts
des charges et conception des jonctions
Ta slovenski standard je istoveten z: CEN/TR 17603-32-05:2022
ICS:
49.140 Vesoljski sistemi in operacije Space systems and
operations
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
TECHNICAL REPORT CEN/TR 17603-32-05
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
January 2022
ICS 49.140
English version
Space engineering - Structural materials handbook - Part
5: New advanced materials, advanced metallic materials,
general design aspects and load transfer and design of
joints
Ingénierie spatiale - Manuel des matériaux structuraux Raumfahrttechnik - Handbuch der
- Partie 5 : Matériaux avancés nouveaux, matériaux Konstruktionswerkstoffe - Teil 5: Neue fortschrittliche
métalliques avancés, aspects généraux de conception, Werkstoffe, fortschrittliche metallische Werkstoffe,
transferts des charges et conception des jonctions allgemeine Konstruktionsaspekte und Lastabtragung
und Auslegung von Verbindungen
This Technical Report was approved by CEN on 29 November 2021. It has been drawn up by the Technical Committee
CEN/CLC/JTC 5.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
CEN-CENELEC Management Centre:
Rue de la Science 23, B-1040 Brussels
© 2022 CEN/CENELEC All rights of exploitation in any form and by any means
Ref. No. CEN/TR 17603-32-05:2022 E
reserved worldwide for CEN national Members and for
CENELEC Members.
Table of contents
European Foreword . 25
Introduction . 26
46 Aluminium alloys and their composites . 27
46.1 Introduction . 27
46.1.1 General . 27
46.1.2 Conventional aluminium alloys . 27
46.1.3 New aluminium alloys . 27
46.1.4 MMC - metal matrix composites . 28
46.1.5 FML - fibre metal laminates . 28
46.1.6 Material availability . 28
46.2 Conventional aluminium alloys. 29
46.2.1 General . 29
46.2.2 Chemical composition . 29
46.2.3 Aerospace alloys . 35
46.2.4 Properties . 35
46.3 New aluminium alloys . 36
46.3.1 Developments . 36
46.3.2 Aluminium-scandium alloys . 36
46.4 Al-Li - Aluminium-lithium alloys . 37
46.4.1 Development . 37
46.4.2 Processing . 37
46.4.3 Applications. 38
46.4.4 Producers . 38
46.4.5 Manufacturing processes . 40
46.5 Al-Li alloys: Characteristics . 41
46.5.1 General . 41
46.5.2 Microstructure . 42
46.5.3 Further development . 43
46.6 Al-Li alloys: Properties . 43
46.6.1 Data . 43
46.6.2 Tensile properties . 43
46.6.3 Fracture properties . 45
46.6.4 Fatigue properties . 47
46.6.5 Design values . 51
46.6.6 Further development alloys . 52
46.7 Al-Li alloys: Stress corrosion cracking . 52
46.7.1 General . 52
46.7.2 Test . 53
46.7.3 Stress corrosion cracking resistance . 53
46.7.4 Recent alloys . 56
46.8 Al-Li alloys: Manufacturing aspects . 57
46.8.1 General . 57
46.8.2 Machining . 57
46.8.3 Welding . 57
46.8.4 Cost implications . 58
46.8.5 Applications. 59
46.8.6 Mass-saving . 59
46.9 Al-Li alloys: Potential applications . 59
46.9.1 General factors . 59
46.9.2 Space Shuttle external tank . 60
46.9.3 A380 - Floor beams . 62
46.10 Oxide dispersion strengthened (ODS) alloys . 63
46.10.1 Type and effect of dispersions . 63
46.10.2 Processing . 63
46.10.3 Cost factors . 64
46.10.4 Applications. 64
46.10.5 Properties . 65
46.11 Rapidly solidified powder (RSP) alloys . 71
46.11.1 Processing . 71
46.11.2 Microstructure . 72
46.11.3 Development . 72
46.11.4 Ambient temperature . 72
46.11.5 Elevated temperature . 74
46.12 Al-MMCs - Metal matrix composites . 76
46.12.1 Introduction . 76
46.12.2 Manufacturing processes . 76
46.12.3 Reinforcement materials . 77
46.12.4 MMC nomenclature . 77
46.12.5 Advantages of MMC’s . 78
46.12.6 Material availability . 78
46.12.7 Sources of further information . 79
46.13 Discontinuously reinforced Al-MMCs . 80
46.13.1 Features . 80
46.13.2 Development . 80
46.13.3 Matrix alloys . 80
46.13.4 Types of reinforcement . 80
46.13.5 Processing . 83
46.14 Discontinuously reinforced Al-alloys: Properties . 85
46.14.1 General . 85
46.14.2 Powder metallurgy MMCs . 86
46.14.3 MMC’s produced by melt infiltration processes . 92
46.14.4 Spray-formed materials . 99
46.14.5 Further information . 100
46.15 Continuously Reinforced Al-Alloy MMC . 101
46.15.1 General . 101
46.15.2 Fibres . 101
46.15.3 Matrix alloys . 104
46.15.4 Characteristics . 104
46.15.5 Processing . 105
46.16 Continuously reinforced Al-alloy MMC: Properties . 106
46.16.1 Mechanical properties . 106
46.16.2 Physical properties . 111
46.17 Al-alloy MMC: Potential applications . 111
46.17.1 Benefits of Aluminium-matrix composites . 111
46.17.2 High specific strength and temperature resistance . 112
46.17.3 High specific stiffness and good thermal properties. 112
46.17.4 High conductivity with low thermal expansion . 113
46.17.5 High specific stiffness and dimensional stability . 113
46.17.6 High specific strength and chemical resistance . 113
46.18 References . 113
46.18.1 General .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.