EN 818-3:1999
(Main)Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4
Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4
This Part of EN 818 specifies the requirements related to safety for short link lifting chains, Grade 4, of medium tolerance for use in chain slings and for general lifting purposes. The standard is applicable to electrically welded round steel short link chains, conforming to EN 818-1, which are intended for lifting objects, materials or goods. The range of nominal sizes of chain covered by this Part of EN 818 is from 7 mm to 45 mm. The hazards covered by this Part of EN 818 are identified in clause 4. Annex A contains the bases for calculation of tabulated values for dimensions, working load limits and mechanical properties. Annex B gives information on the mass/metre of chain. Annex C gives an example of a designation system for chains of grade 4. Annex ZA gives the relationship with EU-Directives
Kurzgliedrige Rundstahlketten für Hebezwecke - Sicherheit - Teil 3: Mitteltolerierte Rundstahlketten für Anschlagketten - Güteklasse 4
Dieser Teil von EN 818 legt Anforderungen in bezug auf Sicherheit fu(r kurzgliedrige Rundstahlketten, Gu(teklasse 4, mitteltoleriert fu(r den Einsatz in Anschlagketten und fu(r allgemeine Hebezwecke fest. Dieses sind elektrisch geschweißte, kurzgliedrige Rundstahlketten, in Übereinstimmung mit den allgemeinen Abnahmebedingungen nach EN 818-1:1996, die zum Heben von Gegensta(nden, Materialien und Gu(tern vorgesehen sind. Der Nenndickenbereich in diesem Teil von EN 818 erstreckt sich von 7 bis 45 mm.
Chaînes de levage à maillons courts - Sécurité - Partie 3: Chaînes de tolérance moyenne pour élingues en chaînes - Classe 4
La présente partie de l'EN 818 définit les prescriptions relatives ` la sécurité pour les chaînes de levage à maillons courts de classe 4, de tolérance moyenne utilisées dans les élingues en chaînes et pour des applications générales de levage. La norme s'applique aux chaînes ` maillons courts en acier rond soudé électriquement, conformes ` l'EN 818-1, prévus pour le levage d'objet, matériaux et de marchandise. La gamme de dimension nominales des chaînes couvertes par cette partie de l'EN 818 va de 7 mm ` 45 mm.
Kratkočlene okrogle verige za dvigovalne namene - Varnost - 3. del: Verige za obesne verige srednje tolerance - Kakovostni razred 4
General Information
- Status
- Withdrawn
- Publication Date
- 18-May-1999
- Withdrawal Date
- 01-Apr-2008
- Technical Committee
- CEN/TC 168 - Chains, ropes, webbing, slings and accessories - safaty
- Drafting Committee
- CEN/TC 168/WG 1 - Welded round steel link chains and chain slings
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 02-Apr-2008
- Completion Date
- 02-Apr-2008
- Directive
- 98/37/EC - Machinery
Relations
- Effective Date
- 18-Jan-2023
- Effective Date
- 22-Dec-2008
Frequently Asked Questions
EN 818-3:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4". This standard covers: This Part of EN 818 specifies the requirements related to safety for short link lifting chains, Grade 4, of medium tolerance for use in chain slings and for general lifting purposes. The standard is applicable to electrically welded round steel short link chains, conforming to EN 818-1, which are intended for lifting objects, materials or goods. The range of nominal sizes of chain covered by this Part of EN 818 is from 7 mm to 45 mm. The hazards covered by this Part of EN 818 are identified in clause 4. Annex A contains the bases for calculation of tabulated values for dimensions, working load limits and mechanical properties. Annex B gives information on the mass/metre of chain. Annex C gives an example of a designation system for chains of grade 4. Annex ZA gives the relationship with EU-Directives
This Part of EN 818 specifies the requirements related to safety for short link lifting chains, Grade 4, of medium tolerance for use in chain slings and for general lifting purposes. The standard is applicable to electrically welded round steel short link chains, conforming to EN 818-1, which are intended for lifting objects, materials or goods. The range of nominal sizes of chain covered by this Part of EN 818 is from 7 mm to 45 mm. The hazards covered by this Part of EN 818 are identified in clause 4. Annex A contains the bases for calculation of tabulated values for dimensions, working load limits and mechanical properties. Annex B gives information on the mass/metre of chain. Annex C gives an example of a designation system for chains of grade 4. Annex ZA gives the relationship with EU-Directives
EN 818-3:1999 is classified under the following ICS (International Classification for Standards) categories: 53.020.30 - Accessories for lifting equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 818-3:1999 has the following relationships with other standards: It is inter standard links to EN 818-3:1999+A1:2008, EN 818-3:1999/prA1. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 818-3:1999 is associated with the following European legislation: EU Directives/Regulations: 98/37/EC; Standardization Mandates: M/BC/CEN/91/1. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 818-3:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2001
.UDWNRþOHQHRNURJOHYHULJH]DGYLJRYDOQHQDPHQH9DUQRVWGHO 9HULJH]D
REHVQHYHULJHVUHGQMHWROHUDQFH.DNRYRVWQLUD]UHG
Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain
slings - Grade 4
Kurzgliedrige Rundstahlketten für Hebezwecke - Sicherheit - Teil 3: Mitteltolerierte
Rundstahlketten für Anschlagketten - Güteklasse 4
Chaî
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...