EN 13282-1:2013

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hydraulische Tragschichtbinder - Teil 1: Schnell erhärtende hydraulische Tragschichtbinder - Zusammensetzung, Anforderungen und KonformitätskriterienLiants hydrauliques routiers - Partie 1: Liants hydrauliques routiers à durcissement rapide - Composition, spécifications et critères de conformitéHydraulic road binders - Part 1: Rapid hardening hydraulic road binders - Composition, specifications and conformity criteria93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 13282-1:2013SIST EN 13282-1:2013en,fr,de01-junij-2013SIST EN 13282-1:2013SLOVENSKI
STANDARDSIST ENV 13282:20011DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13282-1
March 2013 ICS 93.080.20 Supersedes ENV 13282:2000English Version
Hydraulic road binders - Part 1: Rapid hardening hydraulic road binders - Composition, specifications and conformity criteria
Liants hydrauliques routiers - Partie 1: Liants hydrauliques routiers à durcissement rapide - Composition, spécifications et critères de conformité
Hydraulische Tragschichtbinder - Teil 1: Schnell erhärtende hydraulische Tragschichtbinder - Zusammensetzung, Anforderungen und Konformitätskriterien This European Standard was approved by CEN on 20 October 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13282-1:2013: ESIST EN 13282-1:2013

(informative)
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 17 Bibliography. 21
1) To be published. SIST EN 13282-1:2013

Hydraulic road binders are finished products, produced in a factory and supplied ready for use. They are differentiated according to their strength development in rapid hardening hydraulic road binders, specified in this part of this European Standard and normal hardening hydraulic road binders, specified in prEN 13282-2. Part 3 of EN 13282 defines the conformity evaluation procedure for hydraulic road binders according to this standard. Binders obtained through mixing of their constituents on site are not covered by this European Standard. Cements, masonry cements and building limes are also outside the scope of this European Standard, as they are defined in specific European Standards.
Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 autocontrol testing continual testing by the manufacturer of rapid hardening hydraulic road binder spot samples taken at the point(s) of release from the factory/depot 3.2 control period period of production and dispatch identified for the evaluation of the autocontrol test results 3.3 characteristic value value of a required mechanical, physical or chemical property outside of which lies a specified percentage, the percentile Pk, of all the values of the population SIST EN 13282-1:2013

for a given sampling plan, the allowed probability of acceptance of a rapid hardening hydraulic road binder with a characteristic value outside the specified characteristic value 4 Hydraulic road binder 4.1 General A hydraulic binder, when mixed with water, hardens both in the air and under water and remains solid, even under water. A hydraulic road binder is a factory produced hydraulic binder, supplied ready for use, having properties specifically suitable for treatment of materials for bases, sub-bases and capping layers as well as earthworks, in road, railway, airport and other types of infrastructures. NOTE 1 Hydraulic road binders are not only used for road construction but this general designation will be used for a better understanding in this document. A hydraulic road binder consists of a powder made from a blend of different constituents and statistically homogeneous in composition. A high degree of uniformity in all properties shall be obtained through continuous mass production processes.
NOTE 2 Continuous production refers to the process, the definition of the product, its composition and properties but does not imply a 24 h production. 4.2 Rapid hardening hydraulic road binder A rapid hardening hydraulic road binder is a hydraulic road binder which conforms to the requirements for strength at 7 days and 28 days, fineness, initial setting time, soundness, sulfate content and composition, as given in Clause 7. 5 Constituents 5.1 Main constituents The main constituents of a rapid hardening hydraulic road binder are those in a proportion exceeding 10 % by mass. They shall be selected from the following list: a) constituents defined as main constituents in EN 197-1: 1) Portl
...