EN 14227-13:2006

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hydraulically bound mixtures - Specifications - Part 13: Soil treated by hydraulic road binderMélanges traités aux liants hydrauliques - Spécifications - Partie 13: Sol traité au liant hydraulique routierHydraulisch gebundene Gemische - Anforderungen - Teil 13: Bodenverbesserung mit hydraulischem TragschichtbinderTa slovenski standard je istoveten z:EN 14227-13:2006SIST EN 14227-13:2006en93.080.20ICS:SLOVENSKI
STANDARDSIST EN 14227-13:200601-julij-2006

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14227-13May 2006ICS 93.080.20 English VersionHydraulically bound mixtures - Specifications - Part 13: Soiltreated by hydraulic road binderMélanges traités aux liants hydrauliques - Spécifications -Partie 13: Sol traité au liant hydraulique routierHydraulisch gebundene Gemische - Anforderungen - Teil13: Bodenverbesserung mit hydraulischemTragschichtbinderThis European Standard was approved by CEN on 3 February 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14227-13:2006: E

Examples of ‘age of classification’ and curing regimes for Rc, Rt and E testing of treated soils including resistance to water testing by full immersion in water.16 Annex B (informative)
Production control for hydraulically treated mixtures.17 B.1 General.17 B.2 Quality Manual.17 B.3 Organization.17

7.2 Degree of pulverization When required, the degree of pulverization of the mixture, determined in accordance with EN 13286-48, shall conform to one of the categories in Table 2. Table 2 — Degree of pulverization Degree of pulverization Category ≥ 30 % P30 ≥ 40 % P40 ≥ 50 % P50 ≥ 60 % P60 Declared value PDV
7.3 Immediate bearing index When required, the immediate bearing index of the mixture at the declared water content, determined in accordance with EN 13286-47, shall conform to one of the categories in Table 3 observing the following testing procedure. After mixing, the mixture shall be stored in bags in a sealed condition for 60 min. The specimen(s) shall then be manufactured and the determination of the index carried out immediately or no later than 90 min after mixing.

7.4 Moisture condition value When required, the moisture condition value of the mixture, determined in accordance with EN 13286-46, shall conform to one of the categories in Table 4. Table 4 — Moisture condition value category Moisture condition value
Category 6 minimum, 10 maximum MCV6/10 7 minimum, 11 maximum MCV7/11 8 minimum, 12 maximum MCV8/12 9 minimum, 13 maximum MCV9/13 Declared values MCVDV
8 Laboratory mechanical performance classification
...