EN 13880-9:2003
(Main)Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements
Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements
This European Standard describes a method for determining the compatibility of hot applied joint sealants applied to a saw asphalt joint slot
Heiß verarbeitbare Fugenmassen - Teil 9: Prüfverfahren zur Bestimmung der Verträglichkeit mit Asphalten
Diese Europäische Norm beschreibt ein Verfahren zur Bestimmung der Verträglichkeit von heiß verarbeit-baren Fugenmassen mit Asphalt.
Produits de scellement de joints appliqués à chaud - Partie 9 : Méthode d'essai pour la détermination de la compatibilité avec les revêtements bitumineux
Cette Norme européenne décrit une méthode pour la détermination de la compatibilité des produits de scellement de joints appliqués à chaud sur une entaille pratiquée au moyen d'une scie dans un bloc d'enrobé.
Toplo nanosljive tesnilne mase za stike – 9. del: Preskusna metoda za ugotavljanje združljivosti z asfaltnimi vozišči
General Information
- Status
- Published
- Publication Date
- 10-Jun-2003
- Withdrawal Date
- 30-Mar-2005
- Technical Committee
- CEN/TC 227 - Road materials
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 14-Feb-2022
- Completion Date
- 14-Apr-2025
- Directive
- 89/106/EEC - Construction products
Overview
EN 13880-9:2003 is a CEN European Standard that defines a test method for determining the compatibility of hot applied joint sealants with asphalt pavements. The method evaluates whether a hot-applied sealant, installed into a saw-cut asphalt joint slot, shows adhesion or cohesion failure, oil exudation, or softening after controlled conditioning. This standard is part of the EN 13880 series on hot applied joint sealants and is primarily intended for laboratory and quality-assurance testing of road sealing materials.
Key topics and technical requirements
- Scope and principle: Compatibility is assessed by visual inspection of adhesion/cohesion failure or oil exudate/softening between sealant and asphalt after conditioning.
- Specimen preparation:
- Use asphalt test blocks prepared in accordance with EN 13880-11.
- Cut a groove 100 mm long, (13.0 ± 3.2) mm wide and (19.0 ± 3.2) mm deep by wet sawing.
- Clean grooves with a stiff-bristle brush under running water and allow to dry.
- Sealant application:
- Fill grooves with the laboratory sample of hot-applied joint sealant, level surface with a heated knife after cooling.
- Caulk groove ends to prevent leakage.
- Conditioning:
- Place specimens in a fan‑circulated oven at (60 ± 3) °C for (72 ± 1) h (ISO 188 oven recommended).
- Inspect specimens daily to ensure no slumping or collapse.
- Results and reporting:
- Report any adhesion/cohesion failure or oily exudate according to prEN 14188-1.
- Include sample identification, batch/date, test date, results, analyst and laboratory in the test report.
- Annex A (informative):
- An alternative procedure to assess compatibility after heat degradation: extend heating to 6 h at the manufacturer’s maximum recommended safe heating temperature before compatibility assessment.
Applications and users
- Who uses it: material laboratories, joint sealant manufacturers, highway authorities, contractors, quality-control teams and independent testing bodies.
- Practical uses:
- Pre-qualification of hot-applied sealant formulations for use in asphalt pavements.
- Quality control during production and verification after formulation changes.
- Evidence for procurement specifications and compliance testing for road construction and maintenance projects.
- Keywords for search: EN 13880-9, hot applied joint sealants, compatibility with asphalt pavements, test method, asphalt test blocks, heat degradation, sealant conditioning.
Related standards
- EN 13880 series (Parts 1–13) - other test methods for hot applied joint sealants (density, penetration, heat resistance, flow resistance, adhesion testing, etc.).
- EN 13880-11:2003 - preparation of asphalt test blocks used with this compatibility test.
- prEN 14188-1 - specifications and reporting conventions referenced for result expression.
Frequently Asked Questions
EN 13880-9:2003 is a standard published by the European Committee for Standardization (CEN). Its full title is "Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements". This standard covers: This European Standard describes a method for determining the compatibility of hot applied joint sealants applied to a saw asphalt joint slot
This European Standard describes a method for determining the compatibility of hot applied joint sealants applied to a saw asphalt joint slot
EN 13880-9:2003 is classified under the following ICS (International Classification for Standards) categories: 93.080.20 - Road construction materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13880-9:2003 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/124. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 13880-9:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Heiß verarbeitbare Fugenmassen - Teil 9: Prüfverfahren zur Bestimmung der Verträglichkeit mit AsphaltenProduits de scellement de joints appliqués a chaud - Partie 9 : Méthode d'essai pour la détermination de la compatibilité avec les revetements bitumineuxHot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 13880-9:2003SIST EN 13880-9:2004en01-junij-2004SIST EN 13880-9:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13880-9June 2003ICS 93.080.20English versionHot applied joint sealants - Part 9: Test method for thedetermination of compatibility with asphalt pavementsProduits de scellement de joints appliqués à chaud - Partie9: Méthode d'essai pour la détermination de la compatibilitéavec les revêtements bitumineuxHeiß verarbeitbare Fugenmassen - Teil 9: Prüfverfahrenzur Bestimmung der Verträglichkeit mit AsphaltenThis European Standard was approved by CEN on 25 March 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13880-9:2003 ESIST EN 13880-9:2004
Determination of asphalt compatibility after heat degradation.6A.1Principle.6A.2Apparatus.6A.3Preparation and conditioning of test specimens.6SIST EN 13880-9:2004
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...