EN 13880-11:2003
(Main)Hot applied joint sealants - Part 11: Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements
Hot applied joint sealants - Part 11: Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements
This European Standard describes a method for preparing asphalt blocks intended for testing of joint sealants according to prEN 13880-7 and prEN 13880-9.
Heiß verarbeitbare Fugenmassen - Teil 11: Prüfverfahren zur Herstellung von Asphalt-Probekörpern zur Verwendung in der Funktionsprüfung und zur Bestimmung der Verträglichkeit mit Asphalten
Diese Europäische Norm beschreibt ein Verfahren zur Herstellung von Asphalt-Grundkörpern für die Prüfung von Fugenmassen nach prEN 13880 7 und prEN 13880 9.
Produits de scellement de joints appliqués à chaud - Partie 11 : Méthode d'essai pour la préparation des blocs d'enrobés destinés au test fonctionnel et pour la détermination de compatibilité avec les revêtements bitumineux
Cette Norme européenne décrit une méthode pour la préparation des blocs d'enrobés destinés aux produits de scellement de joints conformément au prEN 13880-7 et à l'EN 13880-9.
Toplo nanosljive tesnilne mase za stike – 11. del: Preskusna metoda za pripravo preskusnih asfaltnih blokov za preskuse funkcionalnosti in za ugotavljanje združljivosti z asfaltnimi vozišči
General Information
- Status
- Published
- Publication Date
- 10-Jun-2003
- Withdrawal Date
- 30-Mar-2005
- Technical Committee
- CEN/TC 227 - Road materials
- Current Stage
- 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
- Start Date
- 24-Nov-2023
- Completion Date
- 14-Apr-2025
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 29-Nov-2023
Overview - EN 13880-11:2003 (Hot applied joint sealants / asphalt test blocks)
EN 13880-11:2003 is a CEN test method that specifies how to prepare laboratory asphalt blocks used when evaluating hot applied joint sealants. The standard covers the preparation, compaction, conditioning, cutting and storage of asphalt specimens intended for use in the function test (prEN 13880-7) and compatibility testing with asphalt pavements (EN 13880-9). It ensures repeatable, representative asphalt test blocks for reliable sealant performance assessment.
Key technical topics and requirements
- Purpose: Produce homogenous asphalt blocks for joint sealant function and compatibility tests.
- Principle: Heat hot-mix asphalt, transfer to a moulding box and compact by vibration to form a homogenous block; cool and saw to required specimen sizes.
- Heating: Asphalt heated to 180 °C in a closed container in accordance with ISO 188.
- Moulding and compaction: Use a moulding box (depth 100 mm) and compact per EN 12697-32 (vibratory compactor) to achieve a uniform block.
- Air voids: Target air void content 2 % to 4 % (volume).
- Asphalt mix recipe (required quality):
- Bitumen content: 6.4 % by mass, penetration grade 70/100 per EN 12591
- Aggregate grading (total 0/16 mm):
- Chippings 2/16 mm: 52 %
- Sand 0,075/2 mm: 38 %
- Filler 0/0,075 mm: 10 %
- Aggregates in accordance with EN 13043
- Specimen sizes:
- For prEN 13880-7: (75 ± 1) mm × (25.0 ± 0.5) mm × (12.0 ± 0.5) mm
- For EN 13880-9: (100 ± 1) mm × (100 ± 1) mm × (100 ± 1) mm
- Storage: Store specimens refrigerated at –2 °C to –4 °C until testing to prevent sticking.
- Reporting: Document mix composition, production date/time, aggregate origin/size distribution, preparation/storage dates, and preparator/laboratory ID.
Applications and users
This standard is designed for consistent preparation of asphalt substrates used when testing hot-applied joint sealants. Typical users include:
- Pavement materials laboratories
- Joint sealant manufacturers and R&D teams
- Highway authorities and pavement consultants conducting compatibility and function testing
- Certification and conformity assessment bodies performing standardized sealant tests
Related standards
- prEN 13880-7 - Function testing of joint sealants
- EN 13880-9 - Compatibility with asphalt pavements
- EN 12697-32 - Laboratory compaction by vibratory compactor
- prEN 12697-35 - Laboratory mixing of bituminous mixtures
- EN 12591 - Paving grade bitumens
- EN 13043 - Aggregates for bituminous mixtures
- ISO 188 - Accelerated ageing and heat resistance tests
Keywords: EN 13880-11:2003, hot applied joint sealants, asphalt test blocks, test method, compatibility with asphalt pavements, function test, CEN.
Frequently Asked Questions
EN 13880-11:2003 is a standard published by the European Committee for Standardization (CEN). Its full title is "Hot applied joint sealants - Part 11: Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements". This standard covers: This European Standard describes a method for preparing asphalt blocks intended for testing of joint sealants according to prEN 13880-7 and prEN 13880-9.
This European Standard describes a method for preparing asphalt blocks intended for testing of joint sealants according to prEN 13880-7 and prEN 13880-9.
EN 13880-11:2003 is classified under the following ICS (International Classification for Standards) categories: 93.080.20 - Road construction materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13880-11:2003 has the following relationships with other standards: It is inter standard links to FprEN 13880-11. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13880-11:2003 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 13880-11:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.WDYOMDQMHHeiß verarbeitbare Fugenmassen - Teil 11: Prüfverfahren zur Herstellung von Asphalt-Probekörpern zur Verwendung in der Funktionsprüfung und zur Bestimmung der Verträglichkeit mit AsphaltenProduits de scellement de joints appliqués a chaud - Partie 11 : Méthode d'essai pour la préparation des blocs d'enrobés destinés au test fonctionnel et pour la détermination de compatibilité avec les revetements bitumineuxHot applied joint sealants - Part 11: Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 13880-11:2003SIST EN 13880-11:2004en01-junij-2004SIST EN 13880-11:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13880-11June 2003ICS 93.080.20English versionHot applied joint sealants - Part 11: Test method for thepreparation of asphalt test blocks used in the function test andfor the determination of compatibility with asphalt pavementsProduits de scellement de joints appliqués à chaud - Partie11: Méthode d'essai pour la préparation des blocsasphaltiques destinés au test fonctionnel et pour ladétermination de compatibilité avec les revêtementsbitumineuxHeiß verarbeitbare Fugenmassen - Teil 11: Prüfverfahrenzur Herstellung von Asphalt-Probekörpern zur Verwendungin der Funktionsprüfung und zur Bestimmung derVerträglichkeit mit AsphaltenThis European Standard was approved by CEN on 25 March 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13880-11:2003 ESIST EN 13880-11:2004
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...