Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water

This European Standard specifies a laboratory method to determine the leaching behaviour of substances from coatings into water over defined time intervals.
The release of substances from coatings under natural conditions cannot be determined with this method.

Beschichtungsstoffe - Laborverfahren zur Bestimmung der Freisetzung von Substanzen aus Beschichtungen in intermittierendem Kontakt mit Wasser

Diese Europäische Norm legt ein Laborverfahren fest, mit dem das Auswaschverhalten von Substanzen aus Beschichtungen ins Wasser innerhalb definierter Zeitintervalle bestimmt werden kann.
Das Verfahren ist für die Bestimmung des Auswaschens von Substanzen aus Beschichtungen unter natürlichen Bedingungen nicht anwendbar.

Peintures et vernis - Méthode de laboratoire pour la détermination de la libération de substances provenant de revêtements en contact avec l'eau par intermittence

La présente Norme européenne spécifie une méthode de laboratoire visant à déterminer le comportement à la lixiviation par l'eau des substances contenues dans les revêtements sur des intervalles de temps spécifiés.
La libération de substances depuis les revêtements dans des conditions naturelles ne peut pas être déterminée à l'aide de la présente méthode.

Barve in laki - Laboratorijska metoda za ugotavljanje sproščanja snovi iz premazov ob občasnem stiku z vodo

Ta dokument določa laboratorijsko metodo za ugotavljanje lastnosti izluževanja snovi iz prevlek v vodo v določenih časovnih intervalih.
Sproščanja snovi iz prevlek v naravnih pogojih s to metodo ni mogoče ugotavljati.

General Information

Status
Withdrawn
Publication Date
27-Sep-2011
Withdrawal Date
20-Jan-2026
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
25-Jan-2023
Completion Date
28-Jan-2026

Relations

Effective Date
04-Nov-2020
Effective Date
28-Jan-2026
Effective Date
28-Jan-2026

Frequently Asked Questions

EN 16105:2011 is a standard published by the European Committee for Standardization (CEN). Its full title is "Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water". This standard covers: This European Standard specifies a laboratory method to determine the leaching behaviour of substances from coatings into water over defined time intervals. The release of substances from coatings under natural conditions cannot be determined with this method.

This European Standard specifies a laboratory method to determine the leaching behaviour of substances from coatings into water over defined time intervals. The release of substances from coatings under natural conditions cannot be determined with this method.

EN 16105:2011 is classified under the following ICS (International Classification for Standards) categories: 87.040 - Paints and varnishes. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 16105:2011 has the following relationships with other standards: It is inter standard links to EN 16105:2023, EN ISO 15528:2020, EN 23270:1991. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 16105:2011 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Beschichtungsstoffe - Laborverfahren zur Bestimmung der Freisetzung von Substanzen aus Beschichtungen in intermittierenden Kontakt mit WasserPeintures et vernis - Méthode de laboratoire pour la détermination de la libération de substances provenant de revêtements en contact avec l'eau par intermittencePaints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water87.040Barve in lakiPaints and varnishesICS:Ta slovenski standard je istoveten z:EN 16105:2011SIST EN 16105:2011en,fr,de01-november-2011SIST EN 16105:2011SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16105
September 2011 ICS 87.040 English Version
Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water
Peintures et vernis - Méthode de laboratoire pour la détermination de la libération de substances provenant de revêtements en contact avec l'eau par intermittence
Beschichtungsstoffe - Laborverfahren zur Bestimmung der Freisetzung von Substanzen aus Beschichtungen in intermittierenden Kontakt mit Wasser This European Standard was approved by CEN on 13 August 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16105:2011: ESIST EN 16105:2011

Forms for recording . 12Annex B (informative)
Examples of data: Leaching of biocides . 14B.1 General . 14B.2 Sample preparation . 14B.3 Test procedure . 14B.4 Analytical Methods . 14B.5 Test results . 14B.6 Assessment of the uncertainty . 15Bibliography . 16 SIST EN 16105:2011

3 Foreword This document (EN 16105:2011) has been prepared by Technical Committee CEN/TC 139 “Paints and varnishes”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2012, and conflicting national standards shall be withdrawn at the latest by March 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
5 1 Scope This European Standard specifies a laboratory method to determine the leaching behaviour of substances from coatings into water over defined time intervals. The release of substances from coatings under natural conditions cannot be determined with this method. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 23270, Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing (ISO 3270:1984) EN ISO 15528, Paints, varnishes and raw materials for paints and varnishes — Sampling (ISO 15528:2000) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 substance single chemical element or compound, or a complex structure of compounds, that is contained in the coating and can potentially be extracted from the coating via water contact 3.2 target substance substances to be tested according to 6.3.2 NOTE One or more target substances may be defined. For example, biocides can be the target substances (see Annex B). 3.3 biocide additive added to a coating material to prevent organisms responsible for microbiological degradation from attacking a coating material or a film thereof [EN ISO 4618:2006] NOTE A list of biocides is given in Annex I and IA of the Biocidal Products Directive 98/8/EC (Directive 98/8/EC of the European Parliament and of the Council of 16 February 1998 concerning the placing of biocidal products on the market – BPD). 3.4 coating continuous layer formed from a single or multiple application of a coating material to a substrate [EN ISO 4618:2006] SIST EN 16105:2011

7 4 Reagents 4.1 Standard leachant. Deionised water with a pH-value of (6 ± 1) and a water temperature of (23 ± 2) °C shall be used. 5 Apparatus 5.1 General Check the materials and equipment specified in 5.2.1 to 5.2.6 before use for proper operation and absence of interfering elements that might affect the results of the test. T
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...