CEN ISO/TR 19664:2018

SLOVENSKI STANDARD
01-februar-2019
2G]LYDQMHþORYHNDQDYLEUDFLMH1DYRGLORLQWHUPLQRORJLMD]DLQVWUXPHQWHLQ
RSUHPR]DRFHQMHYDQMHGQHYQHL]SRVWDYOMHQRVWLYLEUDFLMDPQDGHORYQHPPHVWXY
VNODGX]]DKWHYDPLJOHGHYDUQRVWLLQ]GUDYMD,6275
Human response to vibration - Guidance and terminology for instrumentation and
equipment for the assessment of daily vibration exposure at the workplace according to
the requirements of health and safety (ISO/TR 19664:2017)
Schwingungseinwirkung auf den Menschen - Anleitung und Fachausdrücke für
Messgeräte und Hilfseinrichtungen zur Beurteilung der Tages-Schwingungsbelastung
am Arbeitsplatz entsprechend den Gesundheits- und Sicherheitsanforderungen (ISO/TR
19664:2017)
Réponse des individus aux vibrations - Lignes directrices et terminologie pour
l'instrumentation et l'équipement d'évaluation de l'exposition journalière aux vibrations
sur le lieu de travail selon les exigences de santé et de sécurité (ISO/TR 19664:2017)
Ta slovenski standard je istoveten z: CEN ISO/TR 19664:2018
ICS:
13.100 Varnost pri delu. Industrijska Occupational safety.
higiena Industrial hygiene
13.160 Vpliv vibracij in udarcev na Vibration and shock with
ljudi respect to human beings
17.160 Vibracije, meritve udarcev in Vibrations, shock and
vibracij vibration measurements
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

CEN ISO/TR 19664
TECHNICAL REPORT
RAPPORT TECHNIQUE
December 2018
TECHNISCHER BERICHT
ICS 13.160; 17.160
English Version
Human response to vibration - Guidance and terminology
for instrumentation and equipment for the assessment of
daily vibration exposure at the workplace according to the
requirements of health and safety (ISO/TR 19664:2017)
Réponse des individus aux vibrations - Lignes Schwingungseinwirkung auf den Menschen - Anleitung
directrices et terminologie pour l'instrumentation et und Fachausdrücke für Messgeräte und
l'équipement d'évaluation de l'exposition journalière Hilfseinrichtungen zur Beurteilung der Tages-
aux vibrations sur le lieu de travail selon les exigences Schwingungsbelastung am Arbeitsplatz entsprechend
de santé et de sécurité (ISO/TR 19664:2017) den Gesundheits- und Sicherheitsanforderungen
(ISO/TR 19664:2017)
This Technical Report was approved by CEN on 9 November 2018. It has been drawn up by the Technical Committee CEN/TC
231.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TR 19664:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
The text of ISO/TR 19664:2017 has been prepared by Technical Committee ISO/TC 108 "Mechanical
vibration, shock and condition monitoring” of the International Organization for Standardization (ISO)
and has been taken over as CEN ISO/TR 19664:2018 by Technical Committee CEN/TC 231 “Mechanical
vibration and shock” the secretariat of which is held by DIN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of ISO/TR 19664:2017 has been approved by CEN as CEN ISO/TR 19664:2018 without any
modification.
TECHNICAL ISO/TR
REPORT 19664
First edition
2017-05
Human response to vibration —
Guidance and terminology for
instrumentation and equipment for
the assessment of daily vibration
exposure at the workplace according to
the requirements of health and safety
Réponse des individus aux vibrations — Lignes directrices et
terminologie pour l’instrumentation et l’équipement d’évaluation de
l’exposition journalière aux vibrations sur le lieu de travail selon les
exigences de santé et de sécurité
Reference number
ISO/TR 19664:2017(E)
©
ISO 2017
ISO/TR 19664:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

ISO/TR 19664:2017(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Explanation of concepts used for the measurement process . 2
5 Explanation of concepts used for instrumentation types . 3
5.1 General . 3
5.2 Vibration magnitude evaluation . 3
5.3 Exposure time evaluation . 4
5.3.1 Machine timer . 4
5.3.2 Exposure timer . 4
5.4 Exposure calculation based on external data . 4
5.4.1 Vibration exposure calculator . 4
5.4.2 Vibration meter with exposure calculation . 4
5.4.3 Exposure timer with exposure calculation . 5
5.5 Exposure evaluation by measurement . 5
5.5.1 Personal vibration exposure meter (PVEM) . 5
5.5.2 Vibration exposure meter (VEM) . 5
6 Explanation of concepts used for the vibration magnitude source .5
6.1 General . 5
6.2 Manufacturer emission value . 5
6.3 Manufacturer supplementary values . 5
6.4 Comparable machine values . 6
6.5 Machine-specific vibration database values . 6
6.6 Type-specific vibration database values . 6
Annex A (informative) Examples of equipment for the evaluation of daily vibration exposure .7
Bibliography .10
ISO/TR 19664:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO’s adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: w w w . i s o .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 108, Mechanical vibration, shock and
condition monitoring.
iv © ISO 2017 – All rights reserved

ISO/TR 19664:2017(E)
Introduction
Several kinds of device can be used to measure or estimate the vibration magnitude and exposure
duration needed for the assessment of daily vibration exposure at the workplace.
Measuring instrumentation conforming to the requirements of ISO 8041-1 allows the user to perform
good quality repeatable measurements. Measurements using a general-purpose vibration meter are
typically undertaken when equipment (like a hand-held machine or a fork-lift truck) is in operation
allowing attended, direct readings to be taken providing information regarding possible errors and
transient acceleration artefacts. Unattended measurements can be taken using a personal vibration
exposure meter, logging readings taken, for example, over a full working day to provide information
regarding work patterns including transient acceleration artefacts. Using such instrumentation,
the result is always a vibration value or a vibration dose based on vibration readings as taken by the
instrumentation.
In addition, there exists auxiliary equipment which can support risk assessment. Such equipment might
measure the duration of exposure or estimate the instantaneous vibration dose, using, for example, the
information given by the manufacturer on the vibration emission of the machinery used, and might give
information when vibration limits are approached or exceeded. Even though such auxiliary equipment
does not consti
...