iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 11254-2:2001/AC:2002

(Corrigendum)

Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S-on-1 test (ISO 11254-2:2001)

Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S-on-1 test (ISO 11254-2:2001)

DIN - Missing Graphic file in German translation

Laser und Laseranlagen - Bestimmung der laserinduzierten Zerstörschwelle optischer Oberflächen - Teil 2: S auf 1 Prüfung (ISO 11254-2:2001)

Lasers et équipements associés aux lasers - Détermination du seuil d'endommagement provoqué par laser sur les surfaces optiques - Partie 2: Essai S sur 1 (ISO 11254-2:2001)

Laserji in z laserji povezana oprema - Ugotavljanje praga poškodbe na optični površini, povzročene z laserjem - 2. del: Preskus S na 1 (ISO 11254-2:2001/Cor.1:2002))

General Information

Status
Withdrawn
Publication Date
23-Jul-2002
ICS
31.260 - Optoelectronics. Laser equipment
Technical Committee
CEN/TC 123 - Lasers and photonics
Drafting Committee
CEN/TC 123 - Lasers and photonics
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
15-Jul-2011
Completion Date
15-Jul-2011
Ref Project
SIST EN ISO 11254-2:2002/AC:2003 - Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S-on-1 test (ISO 11254-2:2001/Cor.1:2002)

Relations

Replaced By
EN ISO 21254-1:2011 - Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 1: Definitions and general principles (ISO 21254-1:2011)
Effective Date
23-Jul-2011
Replaced By
EN ISO 21254-2:2011 - Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 2: Threshold determination (ISO 21254-2:2011)
Effective Date
23-Jul-2011
Corrects
EN ISO 11254-2:2001 - Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S-on-1 test (ISO 11254-2:2001)
Effective Date
08-Jun-2022

Buy Standard

EN ISO 11254-2:2002/AC:2003EN ISO 11254-2:2002/AC:2003
PreviousNext
Corrigendum
EN ISO 11254-2:2002/AC:2003
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.&RULaser und Laseranlagen - Bestimmung der laserinduzierten Zerstörschwelle optischer Oberflächen - Teil 2: S auf 1 Prüfung (ISO 11254-2:2001/Cor.1:2002)Lasers et équipements associés aux lasers - Détermination du seuil d'endommagement provoqué par laser sur les surfaces optiques - Partie 2: Essai S sur 1 (ISO 11254-2:2001/Cor.1:2002)Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S-on-1 test (ISO 11254-2:2001/Cor.1:2002)31.260Optoelektronika, laserska opremaOptoelectronics. Laser equipmentICS:Ta slovenski standard je istoveten z:EN ISO 11254-2:2001/AC:2002SIST EN ISO 11254-2:2002/AC:2003en01-marec-2003SIST EN ISO 11254-2:2002/AC:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 11254-2:2001/ACJuly 2002Juillet 2002Juli 2002ICS 31.260English versionVersion FrançaiseDeutsche FassungLasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S-on-1test (ISO 11254-2:2001/Cor.1:2002)Lasers et équipements associés aux lasers - Détermination duseuil d'endommagement provoqué par laser sur les surfacesoptiques - Partie 2: Essai S s
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 24013:2023(Main)
Optics and photonics - Lasers and laser-related equipment - Measurement of phase retardation of optical components for polarized laser radiation (ISO 24013:2023)
SIST EN ISO 24013:2023

This document specifies test methods for the determination of the linear optical phase retardation of optical components by polarized laser beams.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13696:2022(Main)
Optics and photonics - Test method for total scattering by optical components (ISO 13696:2022)
SIST EN ISO 13696:2022

This document specifies procedures for the determination of the total scattering by coated and uncoated optical surfaces. Procedures are given for measuring the contributions of the forward scattering or backward scattering to the total scattering of an optical component.
This document applies to coated and uncoated optical components with optical surfaces that have a radius of curvature of more than 10 m. Measurement wavelengths covered by this document range from the ultraviolet above 250 nm to the infrared spectral region below 15 µm. For measurements in the deep ultraviolet between 190 nm to 250 nm, specific methods are considered and are described. Generally, optical scattering is considered as neglectable for wavelengths above 15 µm.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12005:2022(Main)
Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization (ISO 12005:2022)
SIST EN ISO 12005:2022

This document specifies a method, which is a relatively quick and simple method with minimum equipment, for determining the polarization status and, whenever possible, the degree of polarization of the beam from a continuous wave (cw) laser. It can also be applied to repetitively pulsed lasers, if their electric field vector orientation does not change from pulse to pulse.
This document also specifies the method for determining the direction of the electric-field vector oscillation in the case of (completely or partially) linearly polarized laser beams. It is assumed that the laser radiation is quasimonochromatic and sufficiently stable for the purpose of the measurement. This document is applicable to radiation that has uniform polarization over its cross-sectional area.
The knowledge of the polarization status can be very important for some applications of lasers with a high divergence angle, for instance when the beam of such a laser shall be coupled with polarization dependent devices (e.g. polarization maintaining fibres). This document is applicable not only for a narrow and almost collimated laser beam but also for highly divergent beams as well as for beams with large apertures.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11807-2:2021(Main)
Integrated optics - Vocabulary - Part 2: Terms used in classification (ISO 11807-2:2021)
SIST EN ISO 11807-2:2021

This document defines terms used in the classification of integrated optical elements, integrated optical components and integrated optical devices, which find applications, for example, in the fields of optical communications and sensors.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11807-1:2021(Main)
Integrated optics - Vocabulary - Part 1: Optical waveguide basic terms and symbols (ISO 11807-1:2021)
SIST EN ISO 11807-1:2021

This document defines basic terms for integrated optical devices, their related optical chips and optical elements which find applications, for example, in the fields of optical communications and sensors.
—    The coordinate system used in Clause 3 is described in Annex A.
—    The symbols and units defined in detail in Clause 3 are listed in Annex B.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14881:2021(Main)
Integrated optics - Interfaces - Parameters relevant to coupling properties (ISO 14881:2021)
SIST EN ISO 14881:2021

This document defines the relevant properties for coupling lightwaves into and out of integrated optical chips (IOC) and chips with photonic integrated circuits (PIC). This document mainly focuses on butt coupling via the waveguide endfaces. The definitions provide the basis for specifying the elements to be coupled (e. g. fibres, integrated optical chips) related to coupling properties.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11146-2:2021(Main)
Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams (ISO 11146-2:2021)
SIST EN ISO 11146-2:2021

This document specifies methods for measuring beam widths (diameter), divergence angles and beam propagation ratios of laser beams. This document is applicable to general astigmatic beams or unknown types of beams. For stigmatic and simple astigmatic beams, ISO 11146‑1 is applicable.
Within this document, the description of laser beams is accomplished by means of the second order moments of the Wigner distribution rather than physical quantities such as beam widths and divergence angles. However, these physical quantities are closely related to the second order moments of the Wigner distribution. In ISO/TR 11146‑3, formulae are given to calculate all relevant physical quantities from the measured second order moments.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11146-1:2021(Main)
Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams (ISO 11146-1:2021)
SIST EN ISO 11146-1:2021

This document specifies methods for measuring beam widths (diameter), divergence angles and beam propagation ratios of laser beams. This document is only applicable for stigmatic and simple astigmatic beams. If the type of the beam is unknown, and for general astigmatic beams, ISO 11146‑2 is applicable.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11553-1:2020/A11:2020(Amendment)
Safety of machinery - Laser processing machines - Part 1: Laser safety requirements (ISO 11553-1:2020)
SIST EN ISO 11553-1:2020/A11:2021

2020-05-29 PeC: to be offerered for MD
2020-04-30: This A11 will introduce revised Annex ZA for EN ISO 11553-1:2020. Both mother standard and A11 will be offered to OJEU for citation

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11553-1:2020(Main)
Safety of machinery - Laser processing machines - Part 1: Laser safety requirements (ISO 11553-1:2020)
SIST EN ISO 11553-1:2020

This document describes laser radiation hazards arising in laser processing machines, as defined in 3.7. It also specifies the safety requirements relating to laser radiation hazards, as well as the information to be supplied by the manufacturers of such equipment (in addition to that prescribed by IEC 60825).
Requirements dealing with noise as a hazard from laser processing machines are included in ISO 11553‑3:2013.
This document is applicable to machines using laser radiation to process materials.
It is not applicable to laser products, or equipment containing such products, which are manufactured solely and expressly for the following applications:
—     photolithography;
—     stereolithography;
—     holography;
—     medical applications (per IEC 60601-2-22);
—     data storage.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day