EN 573-1:1994
(Main)Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system
This part of EN 573 describes a four-figure numerical system for designating wrought aluminium and aluminium alloys. It is in accordance with the Recommendation dated December 15, 1970 for an International Designation System for Wrought Aluminium and Wrought Aluminium Alloys issued by the Aluminium Association, Washington DC 20006, USA. This standard applies to wrought products and to ingots intended to be wrought.
Aluminium und Aluminiumlegierungen - Chemische Zusammensetzung und Form von Halbzeug - Teil 1: Numerische Bezeichnungssysteme
Der vorliegende Teil der Norm EN 573 beschreibt ein numerisches System mit vier Ziffern zur Bezeichnung von Aluminium und Aluminium-Knetlegierungen. Es entspricht der von der Aluminium Association, Washington DC 20006 (USA), ausgesprochenen Empfehlung vom 15.Dezember 1970 für ein Internationales Bezeichnungssystem für Knetwerkstoffe aus Aluminium und Aluminium-Knetlegierungen. Diese Norm gilt für Produkte aus Knetwerkstoffen und für das entsprechende Vormaterial (z.B. Walz- und Pressbarren oder Knetvormaterial für Schmiedestücke).
Aluminium et alliages d'aluminium - Composition chimique et forme des produits corroyés - Partie 1: Système de désignation numérique
La présente partie de la norme EN 573 décrit un système numérique à quatre chiffres pour désigner l'aluminium et les alliages d'aluminium corroyés. Elle est conforme à la Recommandation du 15 décembre 1970 pour un Système International de Désignation pour l'Aluminium et les Alliages d'Aluminium Corroyés, émise par l'Aluminium Association, Washington DC 20006, Etats-Unis. Cette norme s'applique aux produits corroyés, et aux plaques et billettes destinées à être corroyées.
Aluminij in aluminijeve zlitine - Kemična sestava in oblika gnetenih izdelkov - 1. del: Sistem številčnega označevanja
General Information
- Status
- Withdrawn
- Publication Date
- 29-Aug-1994
- Withdrawal Date
- 26-Oct-2004
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 27-Oct-2004
- Completion Date
- 27-Oct-2004
- Directive
- 97/23/EC - Pressure equipment
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 573-1:1994 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system". This standard covers: This part of EN 573 describes a four-figure numerical system for designating wrought aluminium and aluminium alloys. It is in accordance with the Recommendation dated December 15, 1970 for an International Designation System for Wrought Aluminium and Wrought Aluminium Alloys issued by the Aluminium Association, Washington DC 20006, USA. This standard applies to wrought products and to ingots intended to be wrought.
This part of EN 573 describes a four-figure numerical system for designating wrought aluminium and aluminium alloys. It is in accordance with the Recommendation dated December 15, 1970 for an International Designation System for Wrought Aluminium and Wrought Aluminium Alloys issued by the Aluminium Association, Washington DC 20006, USA. This standard applies to wrought products and to ingots intended to be wrought.
EN 573-1:1994 is classified under the following ICS (International Classification for Standards) categories: 77.040.30 - Chemical analysis of metals. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 573-1:1994 has the following relationships with other standards: It is inter standard links to EN 573-1:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 573-1:1994 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 573-1:1994 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-1998
$OXPLQLMLQDOXPLQLMHYH]OLWLQH.HPLþQDVHVWDYDLQREOLNDJQHWHQLKL]GHONRY
GHO 6LVWHPãWHYLOþQHJDR]QDþHYDQMD
Aluminium and aluminium alloys - Chemical composition and form of wrought products -
Part 1: Numerical designation system
Aluminium und Aluminiumlegierungen - Chemische Zusammensetzung und Form von
Halbzeug - Teil 1: Numerische Bezeichnungssysteme
Aluminium et alliages d'aluminium - Composition chimique et forme des produits
corroyés - Partie 1: Systeme de désignation numérique
Ta slovenski standard je istoveten z: EN 573-1:1994
ICS:
77.040.30 Kemijska analiza kovin Chemical analysis of metals
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...