EN 1097-9:1998
(Main)Tests for mechanical and physical properties of aggregate - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test
Tests for mechanical and physical properties of aggregate - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test
This European Standard specifies the test procedure for the simulation of the abrasive action of studded tyres on coarse aggregates used in a surface layer. The test is applicable to crushed and uncrushed natural and artificial aggregates with a size fraction of 11,2 mm to 16, 0 mm. Note: Deviations from this size range will not give consistent results.
Prüfverfahren für mechanische und physikalische Eigenschaften von Gesteinskörnungen - Teil 9: Bestimmung des Widerstandes gegen Verschleiß durch Spikereifen - Nordische Prüfung
Dieser Teil dieser Europäischen Norm legt das Prüfverfahren für die Nachahmung der Abriebwirkung des Verkehrs auf grobe Gesteinskörnungen, die in einer Oberflächenschicht verwendet werden, fest. Die Prüfung ist für gebrochene und ungebrochene, natürliche und künstliche Gesteinskörnungen mit einer Körnung von 11,2 mm bis 16,0 mm anwendbar. Anmerkung: Bei Abweichungen von dieser Kornklasse sind keine übereinstimmenden Ergebnisse zu erwarten.
Essais pour déterminer les propriétés mécaniques et physiques des granulats - Partie 9: Méthode pour la détermination dela résistance à l'usure par abrasion provoquée par les pneusà crampons - Essai scandinave
La présente partie de la norme européenne spécifie un mode opératoire d'essai de simulation de l'action abrasive provoquée par la circulation de véhicules surles granulats grossiers utilisés pour la couche de roulement. L'essai est applicable aux granulats naturels et artificiels, broyés et non broyés ayant une granularité comprise entre 11,2 mm et 16,0 mm. Note: Tout écart par rapport à cette plage granulaire donne des résultats incohérents.
Preskusi mehanskih in fizikalnih lastnosti agregatov - 9. del: Določevanje odpornosti proti obrabi zaradi gum ježevk – Nordijski preskus
General Information
- Status
- Withdrawn
- Publication Date
- 21-Apr-1998
- Withdrawal Date
- 07-Jan-2014
- Technical Committee
- CEN/TC 154 - Aggregates
- Drafting Committee
- CEN/TC 154/SC 6 - Test methods
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 08-Jan-2014
- Completion Date
- 08-Jan-2014
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 15-Jan-2014
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 08-Jun-2022
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Nonprofit organization that performs technical evaluations of building products.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
BBA (British Board of Agrément)
UK construction product certification.
Sponsored listings
Frequently Asked Questions
EN 1097-9:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Tests for mechanical and physical properties of aggregate - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test". This standard covers: This European Standard specifies the test procedure for the simulation of the abrasive action of studded tyres on coarse aggregates used in a surface layer. The test is applicable to crushed and uncrushed natural and artificial aggregates with a size fraction of 11,2 mm to 16, 0 mm. Note: Deviations from this size range will not give consistent results.
This European Standard specifies the test procedure for the simulation of the abrasive action of studded tyres on coarse aggregates used in a surface layer. The test is applicable to crushed and uncrushed natural and artificial aggregates with a size fraction of 11,2 mm to 16, 0 mm. Note: Deviations from this size range will not give consistent results.
EN 1097-9:1998 is classified under the following ICS (International Classification for Standards) categories: 91.100.15 - Mineral materials and products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1097-9:1998 has the following relationships with other standards: It is inter standard links to EN 1097-9:2014, EN ISO 7623:1997, EN 1097-6:2022, EN 29117:1992, ENV ISO 10722-1:1998, EN 932-5:2012, EN ISO 5080:1999, EN ISO 10321:1996, EN 933-1:2012, EN 1097-9:1998/A1:2005. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1097-9:1998 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/124, M/125. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1097-9:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.ORþHYDQMHPrüfverfahren für mechanische und physikalische Eigenschaften von Gesteinskörnungen - Teil 9: Bestimmung des Widerstandes gegen Verschleiß durch Spikereifen - Nordische PrüfungEssais pour déterminer les propriétés mécaniques et physiques des granulats - Partie 9: Méthode pour la détermination dela résistance a l'usure par abrasion provoquée par les pneusa crampons - Essai scandinaveTests for mechanical and physical properties of aggregate - P
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...