EN 10200:2012
(Main)Chemical analysis of ferrous materials - Determination of boron in steels - Spectrophotometric method
Chemical analysis of ferrous materials - Determination of boron in steels - Spectrophotometric method
This European Standard specifies a spectrophotometric method for the determination of boron in steels. The method is applicable to non-alloyed and alloyed steels with boron contents of 0,000 4 to 0,012 0 % (m/m).
Chemische Analyse von Eisenwerkstoffen - Bestimmung von Bor in Stahl - Spektralphotometrisches Verfahren
Diese Europäische Norm legt ein spektralphotometrisches Verfahren zur Bestimmung von Bor in Stahl fest. Das Verfahren ist auf unlegierte und legierte Stähle mit Boranteilen von 0,000 4 % bis 0,012 0 % (m/m) anwendbar.
Analyse chimique des matériaux ferreux - Détermination du bore dans les aciers - Méthode spectrophotométrique
La présente Norme européenne spécifie une méthode pour la détermination de la teneur en bore dans les aciers par spectrophotométrie. La méthode est applicable aux aciers non alliés et aux aciers alliés avec des teneurs en bore de 0,000 4 à 0,012 0 % (m/m).
Kemična analiza železovih materialov - Določevanje bora in jekla - Spektrofotometrična metoda
Ta evropski standard določa spektrofotometrično metodo za določevanje bora v jeklu. Metoda se uporablja za nelegirana in legirana jekla z vsebnostjo bora od 0,0004 do 0,0120 % (m/m).
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Chemische Analyse von Eisenwerkstoffen - Bestimmung von Bor in Stahl - Spektrophotometrisches VerfahrenAnalyse chimique des matériaux ferreux - Détermination du bore dans les aciers - Méthode spectrophotométriqueChemical analysis of ferrous materials - Determination of boron in steel - Spectrophotometric method77.080.01Železne kovine na splošnoFerrous metals in general77.040.30Kemijska analiza kovinChemical analysis of metalsICS:Ta slovenski standard je istoveten z:EN 10200:2012SIST EN 10200:2013en,fr,de01-april-2013SIST EN 10200:2013SLOVENSKI
STANDARDSIST EN 10200:1991:2007-041DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10200
October 2012 ICS 77.040.30 Supersedes EN 10200:1991English Version
Chemical analysis of ferrous materials - Determination of boron in steels - Spectrophotometric method
Analyse chimique des matériaux ferreux - Détermination du bore dans les aciers - Méthode spectrophotométrique
Chemische Analyse von Eisenwerkstoffen - Bestimmung von Bor in Stahl - Spektrophotometrisches Verfahren This European Standard was approved by CEN on 17 August 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10200:2012: ESIST EN 10200:2013
Precision data . 13Bibliography . 15 SIST EN 10200:2013
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. CEN [and/or] CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 10200:1991. Since the previous edition, no technical changes have been made, but the text has been editorially revised. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 10200:2013
NOTE Diagrams of these blocks are shown in Figures 1 and 2. The dimensions of the holes should be adapted to the dimensions of the quartz beakers available.
5.3 50 ml polyethylene one-mark volumetric flasks. 5.4 100 ml polyethylene flasks. 5.5 Spectrophotometer, suitable for measuring absorbance at a wavelength of 543 nm, with 20 mm cells. SIST EN 10200:2013
NOTE Adapt the dimensions of the holes according to the dimensions of the beakers available. Figure 1 — Example of circular aluminium alloy heating block SIST EN 10200:2013
NOTE
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.