iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12976-1:2000

(Main)

Thermal solar systems and components - Factory made systems - Part 1: General requirements

Thermal solar systems and components - Factory made systems - Part 1: General requirements

This European Standard specifies requirements on durability, reliability and safety for Factory Made thermal solar heating systems. The standard also includes provisions for evaluation of conformity to these require-ments.The requirements in this standard apply to Factory Made solar systems as products. The installation of these systems itself is not considered, but requirements are given for the documentation for the installer and the user which is delivered with the system (see also the clause 3).

Thermische Solaranlagen und ihre Bauteile - Vorgefertigte Anlagen - Teil 1: Allgemeine Anforderungen

Diese Europäische Norm legt Anforderungen hinsichtlich Dauerhaftigkeit, Zuverlässigkeit und Sicherheit für vorgefertigte Solaranlagen fest. Die Norm enthält auch Vorgaben für die Bewertung der Konformität mit diesen Anforderungen. Die Anforderungen in dieser Norm gelten für vorgefertigte Solaranlagen als Produkte. Der Einbau dieser Anlagen wird nicht berücksichtigt, es sind jedoch Anforderungen hinsichtlich der Dokumentation für den Installateur und für den Anwender, die mit diesen Anlagen beliefert wird, angegeben (siehe auch Abschnitt 3).

Installations solaires thermiques et leurs composants -Installations préfabriquées en usine - Partie 1: Exigences générales

La présente norme européenne spécifie les exigences de durabilité, de fiabilité et de sécurité requises des installations de chauffage thermique solaires préfabriquées en usine. Elle contient également des dispositions relatives à l'évaluation de la conformité à ces exigences.
Les exigences de la présente norme s'appliquent aux installations préfabriquées en usine en tant que produits. Le montage de ces installations n'est pas pris en considération, mais des exigences relatives à la documentation fournie avec l'installation et à l'usage de l'installateur et de l'utilisateur sont indiquées (voir également l'article 3).

Toplotni sončni sistemi in sestavni deli - Industrijsko izdelani sistemi - 1. del: Splošne zahteve

General Information

Status
Withdrawn
Publication Date
12-Dec-2000
Withdrawal Date
24-Jan-2006
ICS
27.160 - Solar energy engineering
Technical Committee
CEN/TC 312 - Thermal solar systems and components
Drafting Committee
CEN/TC 312 - Thermal solar systems and components
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
25-Jan-2006
Completion Date
25-Jan-2006
Mandate
M/077 - Mandate to CEN/CENELEC on standards for thermal solar systems and components
Ref Project
SIST EN 12976-1:2002 - Thermal solar systems and components - Factory made systems - Part 1: General requirements

Relations

Replaced By
EN 12976-1:2006 - Thermal solar systems and components - Factory made systems - Part 1: General requirements
Effective Date
22-Dec-2008

Buy Standard

EN 12976-1:2002EN 12976-1:2002
PreviousNext
Standard
EN 12976-1:2002
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Thermische Solaranlagen und ihre Bauteile - Vorgefertigte Anlagen - Teil 1: Allgemeine AnforderungenInstallations solaires thermiques et leurs composants -Installations préfabriquées en usine - Partie 1: Exigences généralesThermal solar systems and components - Factory made systems - Part 1: General requirements27.160Solar energy engineeringICS:Ta slovenski standard je istoveten z:EN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 9488:2022(Main)
Solar energy - Vocabulary (ISO 9488:2022)
SIST EN ISO 9488:2022

This document defines basic terms relating to the work of ISO/TC 180. The committee covers standardization in the field of the measurement of solar radiation and solar energy utilization in space and water heating, cooling, industrial process heating and air conditioning. Consequently, the vocabulary within this document is focussed on definitions relating to those measurement and utilisation technologies.
Since the 1999 version of this document there has been considerable development in solar photovoltaic technologies and high temperature solar thermal technologies that use heat to produce electricity or to provide high temperatures for processes that require elevated temperatures. This standard has some definitions that are useful also for those technologies; however, there are other documents that cover vocabulary for these technologies in more detail.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 24194:2022(Main)
Solar energy - Collector fields - Check of performance (ISO 24194:2022)
SIST EN ISO 24194:2022

This document specifies two procedures to check the performance of solar thermal collector fields. This document is applicable to glazed flat plate collectors, evacuated tube collectors and/or tracking, concentrating collectors used as collectors in fields.
The check can be done on the thermal power output of the collector field and also be on the daily yield of the collector field.
The document specifies for the two procedures how to compare a measured output with a calculated one.
The document applies for all sizes of collector fields.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12975:2022(Main)
Solar collectors - General requirements
SIST EN 12975:2022

This document is applicable to all types of fluid heating solar collectors. This document specifies performance requirements for fluid heating solar collectors with respect to durability, reliability, safety and thermal performance.
This document deals with the solar collector and not with assemblies. This document is not applicable to those devices in which a thermal storage unit is an integral part to such an extent that the collection process cannot be separated from the storage process for making the collector thermal performance measurements.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12976-1:2021(Main)
Thermal solar systems and components - Factory made systems - Part 1: General requirements
SIST EN 12976-1:2022

This document specifies requirements on durability, reliability and safety for factory made solar heating systems. The document also includes provisions for evaluation of conformity to these requirements (see Annex A). The concept of system families is included as well, in Annex C.
The requirements in this document apply to factory made solar systems as products. The installation of these systems including their integration with roofs or facades is not considered, but requirements are given for the documentation for the installer and the user to be delivered with the system (see also 4.6).
External auxiliary water heating devices that are placed in series with the factory made system are not considered to be part of the system. Cold water piping from the cold water grid to the system as well as piping from the system to an external auxiliary heater or to draw-off points is not considered to be part of the system. Piping between components of the factory made system is considered to be part of the system. Any integrated heat exchanger or piping for space heating option (see Introduction, last paragraph) is not considered to be part of the system.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12976-2:2019(Main)
Thermal solar systems and components - Factory made systems - Part 2: Test methods
SIST EN 12976-2:2019

This document specifies test methods for validating the requirements for Factory Made Thermal Solar Heating Systems as specified in EN 12976-1. The document also includes two test methods for thermal performance characterization by means of whole system testing.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12977-4:2018(Main)
Thermal solar systems and components - Custom built systems - Part 4: Performance test methods for solar combistores
SIST EN 12977-4:2018

This European Standard specifies test methods for the performance characterization of stores which are intended for use in small custom built systems as specified in EN 12977-1.
Stores tested according to this document are commonly used in solar combisystems. However, the thermal performance of all other thermal stores with water as a storage medium (e.g. for heat pump systems) can be also assessed according to the test methods specified in this document.
This document applies to combistores with a nominal volume up to 3 000 l and without integrated burner.
NOTE   This document is extensively based on references to EN 12977-3:2012.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12977-2:2018(Main)
Thermal solar systems and components - Custom built systems - Part 2: Test methods for solar water heaters and combisystems
SIST EN 12977-2:2018

This European Standard applies to small and large custom built solar heating systems with liquid heat transfer medium for residential buildings and similar applications, and gives test methods for verification of the requirements specified in EN 12977-1.
This document also includes a method for thermal performance characterization and system performance prediction of small custom built systems by means of component testing and system simulation.
Furthermore, this document contains methods for thermal performance characterization and system performance prediction of large custom built systems.
This document applies to the following types of small custom built solar heating systems:
- systems for domestic hot water preparation only;
- systems for space heating only;
- systems for domestic hot water preparation and space heating;
- others (e.g. including cooling).
This document applies to large custom built solar heating systems, primarily to solar preheat systems, with one or more storage vessels, heat exchangers, piping and automatic controls and with collector array(s) with forced circulation of fluid in the collector loop.
This document does not apply to
- systems with a store medium other than water (e.g. phase- change materials),
- thermosiphon systems,
- integral collector-storage (ICS) systems.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12977-3:2018(Main)
Thermal solar systems and components - Custom built systems - Part 3: Performance test methods for solar water heater stores
SIST EN 12977-3:2018

This European Standard specifies test methods for the performance characterization of stores which are intended for use in small custom built systems as specified in EN 12977-1.
Stores tested according to this document are commonly used in solar hot water systems. However, the thermal performance of all other thermal stores with water as a storage medium can also be assessed according to the test methods specified in this document.
The document applies to stores with a nominal volume between 50 l and 3 000 l.
This document does not apply to combistores. Performance test methods for solar combistores are specified in EN 12977-4.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12977-1:2018(Main)
Thermal solar systems and components - Custom built systems - Part 1: General requirements for solar water heaters and combisystems
SIST EN 12977-1:2018

This European Standard specifies requirements on durability, reliability and safety of small and large custom built solar heating and cooling systems with liquid heat transfer medium in the collector loop for residential buildings and similar applications.
This document also contains requirements on the design process of large custom built systems.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12977-5:2018(Main)
Thermal solar systems and components - Custom built systems - Part 5: Performance test methods for control equipment
SIST EN 12977-5:2018

This European Standard specifies performance test methods for control equipment. Furthermore, this document contains requirements on accuracy, durability and reliability of control equipment.
The tests described in this document are limited to electrically activated components delivered with or for the system by the final supplier. For the purposes of this document controller and control equipment for solar heating systems and auxiliary heaters, if part of the system, are restricted to the following:
a)   Controllers as:
1)   system clocks, timers and counters;
2)   differential thermostats;
3)   multi-function controllers.
b)   Sensors as:
1)   temperature sensors;
2)   irradiance sensors (for short wave radiation);
3)   pressure sensors;
4)   level sensors;
5)   flow meters;
6)   heat meters.
c)   Actuators as:
1)   pumps;
2)   solenoid and motor valves;
3)   relays.
d)   Combinations of controllers, sensors and actuators listed above.
An additional objective of the procedures described in this document is to verify control algorithms and, together with the accuracy of sensors, to determine control parameters. In addition to verifying the functioning of a controller, its equipment and actuators, the determined parameters may be used for numerical system simulations.
Typically, electrical anodes are not part of the control equipment and are not controlled by the control equipment. However, because they are electrical appliances, electrical anodes are included in this document.
This document is valid for control equipment of solar heating systems for the purpose of hot water preparation and/or space heating. If the solar system is connected to or part of a conventional heating system, the validity is extended to the entire system. In combination with the standards EN 12976-1, EN 12976-2 as well as EN 12977-1, EN 12977-2, EN 12977-3 and EN 12977-4, this document is valid for
e) factory made solar heating systems,
f) small custom built solar heating systems,
g) large custom built solar heating systems,
h)   auxiliary heater equipment used in connection with e), f) and g).

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day