EN 1911-1:1998
(Main)Stationary source emissions - Manual method of determination of HCl - Part 1: Sampling of gases
Stationary source emissions - Manual method of determination of HCl - Part 1: Sampling of gases
This standard specifies a method for sampling and filtration of gases, in view of their HCl concentration determination. Subsequent HCl absorption and analysis are described in prEN 1911-2 and prEN 1911-3 respectively. The method applies to ducted gaseous streams emitted by waste incinerators, and more generally to waste gases in which HCl concentration may vary between 1 mg. m-3 and 5000 mg.m-3 under normal pressure and temperature conditions. The method is validated for gaseous streams of dust concentration below 100 mg.m-3, and is not suitable for measurement of molecular chlorine Cl2 content.
Emissionen aus stationären Quellen - Manuelle Methode zur Bestimmung von HCl - Teil 1: Ansaugen des Probegases
Diese Norm legt ein Verfahren zur Probenahme und Filtration von Gasen für die Bestimmung von deren Konzentration an HCl fest. Die anschließende Absorption beziehungsweise analytische Bestimmung von HCl werden in prEN 1911-2 und prEN 1911-3 beschrieben. Das Verfahren ist anwendbar für geführte Abgasemissionen von Müllverbrennungsanlagen und, allgemeiner, für Abgase, in denen die HCl- Konzentrationen zwischen 1 mg.m-3 und 5000 mg.m-3 unter Normbedingungen liegen. Die Methode ist für Gasströme mit einer Staubkonzentration unter 100 mg.m-3 validiert.
Emissions de sources fixes - Méthode manuelle de dosage du HCl - Partie 1: Echantillonnage des gaz
La présente norme spécifie une méthode d'échantillonnage et de filtration des gaz pour la détermination de leur concentration en HCl. L'absorption ultérieure de HCl et l'analyse sont respectivement décrites dans le prEN 1911-2 et le prEN 1911-3. La méthode s'applique aux effluents gazeux canalisés, provenant d'incinérateurs de déchets et, plus généralement, aux gaz résiduaires dont la concentration en HCl est comprise entre 1 mg.m-3 et 5000 mg.m-3, dans des conditions normales de pression et de température.
Emisije nepremičnih virov - Ročna metoda določevanja HCl - 1. del: Metoda vzorčenja plinov
General Information
- Status
- Withdrawn
- Publication Date
- 21-Apr-1998
- Withdrawal Date
- 10-Aug-2010
- Technical Committee
- CEN/TC 264 - Air quality
- Drafting Committee
- CEN/TC 264/WG 3 - HCl Emission - manual method
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 11-Aug-2010
- Completion Date
- 11-Aug-2010
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 09-Feb-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
NSF International
Global independent organization facilitating standards development and certification.
CIS Institut d.o.o.
Personal Protective Equipment (PPE) certification body. Notified Body NB-2890 for EU Regulation 2016/425 PPE.
Kiwa BDA Testing
Building and construction product certification.
Sponsored listings
Frequently Asked Questions
EN 1911-1:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Stationary source emissions - Manual method of determination of HCl - Part 1: Sampling of gases". This standard covers: This standard specifies a method for sampling and filtration of gases, in view of their HCl concentration determination. Subsequent HCl absorption and analysis are described in prEN 1911-2 and prEN 1911-3 respectively. The method applies to ducted gaseous streams emitted by waste incinerators, and more generally to waste gases in which HCl concentration may vary between 1 mg. m-3 and 5000 mg.m-3 under normal pressure and temperature conditions. The method is validated for gaseous streams of dust concentration below 100 mg.m-3, and is not suitable for measurement of molecular chlorine Cl2 content.
This standard specifies a method for sampling and filtration of gases, in view of their HCl concentration determination. Subsequent HCl absorption and analysis are described in prEN 1911-2 and prEN 1911-3 respectively. The method applies to ducted gaseous streams emitted by waste incinerators, and more generally to waste gases in which HCl concentration may vary between 1 mg. m-3 and 5000 mg.m-3 under normal pressure and temperature conditions. The method is validated for gaseous streams of dust concentration below 100 mg.m-3, and is not suitable for measurement of molecular chlorine Cl2 content.
EN 1911-1:1998 is classified under the following ICS (International Classification for Standards) categories: 13.040.40 - Stationary source emissions. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1911-1:1998 has the following relationships with other standards: It is inter standard links to EN 1911:2010, EN 60601-1-8:2007/A11:2017, EN ISO 80601-2-55:2011, EN ISO 20072:2010, EN ISO 80601-2-12:2020, EN ISO 80601-2-12:2011, EN ISO 11197:2019, EN ISO 23747:2009, EN ISO 10939:2007, EN ISO 80601-2-84:2023, EN ISO 27427:2019, EN ISO 14457:2012, EN ISO 18778:2022, EN ISO 81060-2:2014, EN ISO 10341:2012. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1911-1:1998 is associated with the following European legislation: EU Directives/Regulations: 2000/76/EC, 89/369/EEC, 89/429/EEC, 94/67/EC; Standardization Mandates: M/BC/CEN/91/14. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1911-1:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-1999
(PLVLMHQHSUHPLþQLKYLURY5RþQDPHWRGDGRORþHYDQMD+&OGHO 0HWRGD
Y]RUþHQMDSOLQRY
Stationary source emissions - Manual method of determination of HCl - Part 1: Sampling
of gases
Emissionen aus stationären Quellen - Manuelle Methode zur Bestimmung von HCl - Teil
1: Ansaugen des Probegases
Emissions de sources fixes
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...