EN 1708-2:2000
(Main)Welding - Basic weld joint details in steel - Part 2: Non internal pressurized components
Welding - Basic weld joint details in steel - Part 2: Non internal pressurized components
The purpose of this European Standard is to exemplify sound and accepted welded connections applicable to welded not internal pressurized steel components. It does not promote the standardization of connections that may be regarded as mandatory or restrict development in any way. The requirements of carrying capacity, fitness for purposes, fatigue and corrosion stress are to be considered if necessary. This standard contains examples of connections welded by the following processes (process numbers according to EN ISO 4063): - Manual metal arc welding (111); - self-shielded tubular-cored arc welding (114); - Submerged arc welding (12); - MIG welding; Metal inert gas welding (131); - MAG welding; Metal active gas welding (135) - Tubular cored metal arc welding with active gas shield (136); - Tubular cored metal arc welding with inert gas shield (137); - TIG welding; Tungsten inert gas arc welding (141). Other processes by agreement. Further requirements should be considered in accordance with existing application standards.
Schweißen - Verbindungselemente beim Schweißen von Stahl - Teil 2: Nicht innendruckbeanspruchte Bauteile
Mit dieser Europäische Norm ist beabsichtigt, Beispiele für zuverlässige und anerkannte geschweißte Verbindungen zu geben, die für nicht innendruckbeanspruchte Stahlbauteile anwendbar sind. Sie fördert nicht die Normung von Verbindungen, die als obligatorisch angesehen werden können oder schränkt die Entwicklungen in keiner Weise ein. Die Anforderungen an die Tragfähigkeit, Gebrauchstauglichkeit, Dauerfestigkeits- und Korrosionsbeanspruchung sind, falls nötig, zu berücksichtigen. Diese Norm enthält Beispiele von Verbindungen, die nach folgenden Prozessen (Prozeßnummer nach EN ISO 4063) geschweißt werden: - Lichtbogenhandschweißen (111); - Metall-Lichtbogenschweißen mit Fülldrahtelektrode ohne Schutzgas (114); - Unterpulverschweißen (12); - MIG-Schweißen, Metall-Inertgasschweißen (131); - MAG-Schweißen, Metall-Aktivgasschweißen (135); - Metall-Aktivgasschweißen mit Fülldrahtelektrode (136); - Metall-Inertgasschweißen mit Fülldrahtelektrode (137); - WIG-Schweißen; Wolfram-Inertgasschweißen (141); Andere Prozesse nach Vereinbarung. Weitere Anforderungen sollten in Übereinstimmung mit vorhandenen Anwendungsnormen berücksichtigt werden.
Soudage - Descriptif de base des assemblages soudés en acier - Partie 2: Composants non soumis à une pression interne
La présente Norme européenne a pour objet d'illustrer par des exemples des assemblages soudés sains et approuvés, applicables aux composants soudés en acier non soumis à une pression interne. Elle ne vise aucunement à promouvoir pour ces assemblages une normalisation qui puisse être considérée comme obligatoire ou à en restreindre le développement de quelque façon que ce soit. Les exigences concernant la charge utile, l'aptitude à l'emploi, les contraintes de fatigue et de corrosion sont à prendre en considération si nécessaire. La présente norme contient des exemples d'assemblages soudés par les procédés suivants (numéros des procédés selon l'EN ISO 4063) : - Soudage manuel à l'arc avec électrode enrobée (111) ; - Soudage à l'arc avec fil fourré auto protecteur (114) ; - Soudage à l'arc sous flux (en poudre) (12) ; - Soudage MIG (soudage à l'arc sous protection de gaz inerte avec fil-électrode fusible), (131) ; - Soudage MAG (soudage à l'arc sous protection de gaz actif avec fil-électrode fusible), (135) ; - Soudage MAG avec fil fourré (soudage à l'arc sous protection de gaz actif avec fil-électrode fourré), (136) ; - Soudage MIG avec fil fourré (soudage à l'arc sous protection de gaz inerte avec fil-électrode fourré), (137) ; - Soudage TIG (soudage à l'arc sous protection de gaz inerte avec électrode de tungstène), (141).
Autres procédés par accord. Il convient de prendre en considération d'autres exigences conformément aux normes d'application existantes.
Varjenje - Opis zvarnih spojev na jeklu - 2. del: Deli tlačnih posod brez tlačne obremenitve
General Information
- Status
- Withdrawn
- Publication Date
- 18-Jul-2000
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 121 - Welding
- Drafting Committee
- CEN/TC 121/SC 4 - Quality management in the field of welding
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 05-Dec-2018
- Completion Date
- 28-Jan-2026
Relations
- Effective Date
- 03-Feb-2016
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 1708-2:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Welding - Basic weld joint details in steel - Part 2: Non internal pressurized components". This standard covers: The purpose of this European Standard is to exemplify sound and accepted welded connections applicable to welded not internal pressurized steel components. It does not promote the standardization of connections that may be regarded as mandatory or restrict development in any way. The requirements of carrying capacity, fitness for purposes, fatigue and corrosion stress are to be considered if necessary. This standard contains examples of connections welded by the following processes (process numbers according to EN ISO 4063): - Manual metal arc welding (111); - self-shielded tubular-cored arc welding (114); - Submerged arc welding (12); - MIG welding; Metal inert gas welding (131); - MAG welding; Metal active gas welding (135) - Tubular cored metal arc welding with active gas shield (136); - Tubular cored metal arc welding with inert gas shield (137); - TIG welding; Tungsten inert gas arc welding (141). Other processes by agreement. Further requirements should be considered in accordance with existing application standards.
The purpose of this European Standard is to exemplify sound and accepted welded connections applicable to welded not internal pressurized steel components. It does not promote the standardization of connections that may be regarded as mandatory or restrict development in any way. The requirements of carrying capacity, fitness for purposes, fatigue and corrosion stress are to be considered if necessary. This standard contains examples of connections welded by the following processes (process numbers according to EN ISO 4063): - Manual metal arc welding (111); - self-shielded tubular-cored arc welding (114); - Submerged arc welding (12); - MIG welding; Metal inert gas welding (131); - MAG welding; Metal active gas welding (135) - Tubular cored metal arc welding with active gas shield (136); - Tubular cored metal arc welding with inert gas shield (137); - TIG welding; Tungsten inert gas arc welding (141). Other processes by agreement. Further requirements should be considered in accordance with existing application standards.
EN 1708-2:2000 is classified under the following ICS (International Classification for Standards) categories: 25.160.40 - Welded joints and welds. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1708-2:2000 has the following relationships with other standards: It is inter standard links to EN 1708-2:2018, EN ISO 4063:2023, EN 1792:2003, EN ISO 9692-2:2024, EN ISO 17659:2004, EN ISO 15614-1:2017, EN ISO 2553:2019; is excused to EN 1708-1:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1708-2:2000 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1708-2:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.REUHPHQLWYHSchweißen - Verbindungselemente beim Schweißen von Stahl - Teil 2: Nicht innendruckbeanspruchte BauteileSoudage - Descriptif de base des assemblages soudés en acier - Partie 2: Composants non soumis a une pression interneWelding - Basic weld joint details in steel - Part 2: Non internal pressurized components25.160.40Varjeni spoji in variWelded jointsICS:Ta slovenski standard je istoveten z:EN 1708-2:2000SIST EN 1708-2:2001en01-december-2001SIST EN 1708-2:2001SLOVE
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...