EN 15433-6:2016
(Main)Transportation loads - Measurement and evaluation of dynamic-mechanical loads - Part 6: Automatic recording systems for measuring randomly occurring shock during monitoring of transports
Transportation loads - Measurement and evaluation of dynamic-mechanical loads - Part 6: Automatic recording systems for measuring randomly occurring shock during monitoring of transports
This European Standard specifies the technical and functional properties of automatic recording equipment used to determine randomly appearing shocks during transportation.
Such automatic recording equipment can be used to:
— determine mechanical shock loads on individual transportations;
— monitor the transportation means to observe the limits of the shock parameters;
— determine the shock loads on the transported item.
This standard defines the sensors to be attached to the device, and specifies the minimum requirements for the parameters to be adjusted. It also defines the minimum requirements for the data analysis, as well as the data presentation.
This standard covers the complete recording equipment, including its accelerometers and the data analysis in an external data processing unit. The accelerometers can be integrated into the device or separately mounted from it (external sensors).
This standard also applies to the routine monitoring of individual transportations
Transportbelastungen - Messen und Auswerten von mechanisch-dynamischen Belastungen - Teil 6: Transportüberwachung mit automatischen Aufzeichnungsgeräten zur Messung stochastisch auftretender Stöße
Charges de transport - Mesurage et analyse des charges mécaniques dynamiques - Partie 6 : Systèmes d'enregistrement automatiques pour la mesure de choc aléatoire intervenant durant le suivi de transports
La présente Norme européenne spécifie les propriétés techniques et fonctionnelles des équipements d'enregistrement automatiques utilisés pour déterminer les chocs aléatoires qui surviennent pendant le transport.
De tels équipements d'enregistrement automatiques peuvent être utilisés pour :
— déterminer les charges de chocs mécaniques exercées sur des moyens de transport isolés ;
— surveiller les moyens de transport afin d'observer les limites des paramètres de choc ;
— déterminer les charges de choc exercées sur l'article transporté.
La présente norme définit les détecteurs à relier au dispositif, et spécifie les exigences minimales relatives aux paramètres à régler. Elle définit également les exigences minimales relatives à l'analyse des données, ainsi qu'à la présentation des données.
La présente norme couvre l'équipement d'enregistrement complet, y compris ses accéléromètres et l'analyse des données dans une unité de traitement de données externe. Les accéléromètres peuvent être intégrés au dispositif ou montés séparément (détecteurs externes).
La présente norme s'applique également à la surveillance de routine des moyens de transport individuels.
Obremenitve pri transportu - Merjenje in vrednotenje dinamično mehanskih obremenitev - 6. del: Sistemi za avtomatsko beleženje pri merjenju naključnih sunkov, ki se pojavljajo med spremljanjem transporta
Ta evropski standard določa tehnične in funkcionalne lastnosti opreme za avtomatsko beleženje, ki se uporablja za določanje naključnih sunkov, ki se pojavljajo med transportom. Taka oprema za avtomatsko beleženje se lahko uporablja za: – določanje mehanskih obremenitev zaradi sunkov pri posameznih transportih; – spremljanje transportov za opazovanje mejnih vrednosti parametrov sunkov; – določanje obremenitev zaradi sunkov pri elementu, ki se prevaža. Ta standard opredeljuje senzorje, ki se pritrdijo na napravo, in določa minimalne zahteve za prilagoditev parametrov. Opredeljuje tudi minimalne zahteve za analizo in predstavitev podatkov. Ta standard zajema celotno opremo za beleženje, vključno z njenimi merilniki pospeška in analizo podatkov v zunanji enoti za obdelavo podatkov. Merilnike pospeška je mogoče vgraditi v napravo ali namestiti ločeno od nje (zunanji senzorji). Ta standard se uporablja tudi za redno spremljanje posameznih transportov.
General Information
- Status
- Published
- Publication Date
- 26-Jul-2016
- Withdrawal Date
- 30-Jan-2017
- Technical Committee
- CEN/TC 261 - Packaging
- Drafting Committee
- CEN/TC 261/SC 5 - Primary packaging and transport packaging
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 11-Sep-2024
- Completion Date
- 21-Jan-2026
Relations
- Effective Date
- 03-Aug-2016
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Frequently Asked Questions
EN 15433-6:2016 is a standard published by the European Committee for Standardization (CEN). Its full title is "Transportation loads - Measurement and evaluation of dynamic-mechanical loads - Part 6: Automatic recording systems for measuring randomly occurring shock during monitoring of transports". This standard covers: This European Standard specifies the technical and functional properties of automatic recording equipment used to determine randomly appearing shocks during transportation. Such automatic recording equipment can be used to: — determine mechanical shock loads on individual transportations; — monitor the transportation means to observe the limits of the shock parameters; — determine the shock loads on the transported item. This standard defines the sensors to be attached to the device, and specifies the minimum requirements for the parameters to be adjusted. It also defines the minimum requirements for the data analysis, as well as the data presentation. This standard covers the complete recording equipment, including its accelerometers and the data analysis in an external data processing unit. The accelerometers can be integrated into the device or separately mounted from it (external sensors). This standard also applies to the routine monitoring of individual transportations
This European Standard specifies the technical and functional properties of automatic recording equipment used to determine randomly appearing shocks during transportation. Such automatic recording equipment can be used to: — determine mechanical shock loads on individual transportations; — monitor the transportation means to observe the limits of the shock parameters; — determine the shock loads on the transported item. This standard defines the sensors to be attached to the device, and specifies the minimum requirements for the parameters to be adjusted. It also defines the minimum requirements for the data analysis, as well as the data presentation. This standard covers the complete recording equipment, including its accelerometers and the data analysis in an external data processing unit. The accelerometers can be integrated into the device or separately mounted from it (external sensors). This standard also applies to the routine monitoring of individual transportations
EN 15433-6:2016 is classified under the following ICS (International Classification for Standards) categories: 55.180.01 - Freight distribution of goods in general. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 15433-6:2016 has the following relationships with other standards: It is inter standard links to EN 15433-6:2007, EN 15433-2:2007, EN 15433-1:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 15433-6:2016 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...