EN ISO 307:2007/A1:2013

SLOVENSKI STANDARD
01-februar-2014
3ROLPHUQLPDWHULDOL3ROLDPLGL'RORþDQMHãWHYLODYLVNR]QRVWL'RSROQLOR$
3RSUDYNLLQSRVRGRELWHY]YH]H]-,6.,62$PG
Plastics - Polyamides - Determination of viscosity number - Amendment 1: Corrections,
and update to reference to JIS K 6920-2 (ISO 307:2007/Amd 1:2013)
Kunststoffe - Polyamide - Bestimmung der Viskositätszahl - Änderung 1: Berichtigungen
und Aktualisierung des Verweises auf JIS K 6920-2 (ISO 307:2007/Amd 1:2013)
Plastiques - Polyamides - Détermination de l'indice de viscosité - Amendement 1:
Corrections, et mise à jour de la référence à la norme JIS K 6920-2 (ISO 307:2007/Amd
1:2013)
Ta slovenski standard je istoveten z: EN ISO 307:2007/A1:2013
ICS:
83.080.20 Plastomeri Thermoplastic materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 307:2007/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2013
ICS 83.080.20
English Version
Plastics - Polyamides - Determination of viscosity number -
Amendment 1: Corrections, and update to reference to JIS K
6920-2 (ISO 307:2007/Amd 1:2013)
Plastiques - Polyamides - Détermination de l'indice de Kunststoffe - Polyamide - Bestimmung der Viskositätszahl -
viscosité - Amendement 1: Corrections, et mise à jour de la Änderung 1 (ISO 307:2007/Amd 1:2013)
référence à la norme JIS K 6920-2 (ISO 307:2007/Amd
1:2013)
This amendment A1 modifies the European Standard EN ISO 307:2007; it was approved by CEN on 2 April 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 307:2007/A1:2013: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 307:2007/A1:2013) has been prepared by Technical Committee ISO/TC 61 "Plastics"
in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2013, and conflicting national standards shall be withdrawn at
the latest by October 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 307:2007/Amd 1:2013 has been approved by CEN as EN ISO 307:2007/A1:2013 without any
modification.
INTERNATIONAL ISO
STAND
...