EN ISO 105-E07:1997

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tekstilije - Preskušanje barvne obstojnosti - Del E07: Barvna obstojnost proti kapljam: voda (ISO 105-E07:1989)Textilien - Farbechtheitsprüfungen - Teil E07: Farbechtheit gegen Flecken: Wasser (ISO 105-E07:1989)Textiles - Essais de solidité des teintures - Partie E07: Solidité des teintures a la goutte d'eau (ISO 105-E07:1989)Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting: Water (ISO 105-E07:1989)59.080.01Tekstilije na splošnoTextiles in generalICS:Ta slovenski standard je istoveten z:EN ISO 105-E07:1997SIST EN ISO 105-E07:1999en01-marec-1999SIST EN ISO 105-E07:1999SLOVENSKI
STANDARD
INTERNATIONAL STANDARD IO!%EO7 Third edition 19894245 Textiles - Tests for colour fastness - Part EO7 : Colour fastness to spotting: Water Textiles - Essais de soliditb des teintures - Partie EO7 : Solidife des teintures a la goutte d’eau Reference number ISO 105407: 1989(E) SIST EN ISO 105-E07:1999

ISO 105E07:1989(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, govern- mental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting. International Standard ISO 105-EO7 was prepared by Technical Commit- tee ISO/TC 38, Textiles. This third edition cancels and replaces the second edition (ISO 105-E07:1987), of which it constitutes a technical revision. ISO 105 was previously published in 13 “parts”, each designated by a letter (e.g. “Part A”), with publication dates between 1978 and 1985. Esch part contained a series of “sections”, each designated by the re- spective part letter and by a two-digit serial number (e,g. “Section AOI”). These sections are now being republished as separate documents, themselves designated “Parts” but retaining their earlier alphanumeric designations. A complete list of these Parts is given in ISO 105-AO?. 0 ISO 1989 All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronie or mechanical, including photocopying and microfilm, without Permiss
...