Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting: Water (ISO 105-E07:2010)

ISO 105-E07:2010 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to spotting by water.

Textilien - Farbechtheitsprüfungen - Teil E07: Farbechtheit gegen Flecken: Wasser (ISO 105-E07:2010)

Dieser Teil der ISO 105 legt ein Verfahren zur Bestimmung der Widerstandsfähigkeit der Farben von Textilien
aller Art und in allen Verarbeitungszuständen gegen Fleckenbildung durch Wasser fest.

Textiles - Essais de solidité des coloris - Partie E07: Solidité des coloris à la goutte d'eau (ISO 105-E07:2010)

L'ISO 105-E07:2010 spécifie une méthode pour la détermination de la solidité à la goutte d'eau des coloris sur les textiles de toute nature, à tous leurs stades de transformation.

Tekstilije - Preskušanje barvne obstojnosti - Del E07: Barvna obstojnost proti kapljam vode (ISO 105-E07:2010)

Ta del standarda ISO 105 določa metodo za določevanje odpornosti barve vseh vrst in oblik tekstilij proti kapljam vode.

General Information

Status
Published
Publication Date
14-Apr-2010
Withdrawal Date
30-Oct-2010
ICS
59.080.01 - Textiles in general
Technical Committee
CEN/TC 248 - Textiles and textile products
Drafting Committee
CEN/TC 248/SC 3 - Chemical properties
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
15-Apr-2010
Completion Date
15-Apr-2010
Ref Project
SIST EN ISO 105-E07:2012 - Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting by water (ISO 105-E07:2010)

Relations

Replaces
EN ISO 105-E07:1997 - Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting: Water (ISO 105-E07:1989)
Effective Date
22-Dec-2008

Overview

EN ISO 105-E07:2010 - Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting: Water (ISO 105-E07:2010) is a CEN-endorsed ISO method for assessing how resistant textile colours are to spotting by water. The standard defines a repeatable laboratory procedure to produce and evaluate water spots on textile specimens, using both visual grey-scale assessment and instrumental colour measurement.

Key topics and requirements

  • Scope: Applies to textiles of all kinds and in all forms for determining resistance of colour to spotting by water.
  • Test principle: Drops of grade 3 (analytical) water are worked into the specimen with a rounded glass rod to form an approximate 20 mm diameter spot; colour change is assessed after 2 minutes and again after drying.
  • Specimen preparation:
    • Fabric: (40 ± 2) mm × (100 ± 2) mm.
    • Yarn: knit into fabric of the same dimensions or formed into a wick (~100 mm × ~5 mm diameter).
    • Loose fibre: combed/compressed into a sheet of the same dimensions.
  • Apparatus and reagents:
    • Pipette/dropper, rounded glass rod.
    • Grey scale (ISO 105-A02) for visual assessment.
    • Spectrophotometer/colorimeter for instrumental assessment (ISO 105-A05).
    • Grade 3 water complying with ISO 3696.
  • Special cases: For water-repellent fabrics, applied water shall not exceed 0.5 ml.
  • Reporting: Test reports must reference ISO 105-E07:2010, identify the sample, give numerical grey-scale ratings and/or instrumental assessments after 2 minutes and after drying, and note any deviations from the procedure.

Practical applications

  • Quality control in textile and apparel manufacturing to verify resistance to water-induced spotting.
  • Product development when selecting dyes, finishes or water-repellent treatments.
  • Conformity testing for retailers, specifiers and certification bodies concerned with appearance retention.
  • Comparative laboratory testing between materials, dye systems or finishing processes.
  • Useful for textile testing laboratories, R&D teams, procurement specialists and sustainability/quality managers.

Who uses this standard

  • Textile and garment manufacturers
  • Independent testing laboratories and certification bodies
  • Fabric finishers and dye houses
  • Retail quality assurance and product development teams
  • Standards and compliance officers

Related standards

  • ISO 105-A02 - Grey scale for assessing change in colour
  • ISO 105-A05 - Instrumental assessment of change in colour
  • ISO 3696 - Water for analytical laboratory use
  • ISO 105-A01, ISO 105-J01, ISO 105-J03 and comparable methods (e.g., AATCC TM 104)

This standard is essential for reliable, repeatable colour fastness, spotting tests, and ensures consistent evaluation using both visual and instrumental methods.

Frequently Asked Questions

EN ISO 105-E07:2010 is a standard published by the European Committee for Standardization (CEN). Its full title is "Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting: Water (ISO 105-E07:2010)". This standard covers: ISO 105-E07:2010 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to spotting by water.

ISO 105-E07:2010 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to spotting by water.

EN ISO 105-E07:2010 is classified under the following ICS (International Classification for Standards) categories: 59.080.01 - Textiles in general. The ICS classification helps identify the subject area and facilitates finding related standards.

EN ISO 105-E07:2010 has the following relationships with other standards: It is inter standard links to EN ISO 105-E07:1997. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

You can purchase EN ISO 105-E07:2010 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2012
1DGRPHãþD
SIST EN ISO 105-E07:1999
Tekstilije - Preskušanje barvne obstojnosti - Del E07: Barvna obstojnost proti
kapljam vode (ISO 105-E07:2010)
Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting by water (ISO
105-E07:2010)
Textilien - Farbechtheitsprüfungen - Teil E07: Farbechtheit gegen Fleckenbildung durch
Wasser (ISO 105-E07:2010)
Textiles - Essais de solidité des teintures - Partie E07: Solidité des teintures à la goutte
d'eau (ISO 105-E07:2010)
Ta slovenski standard je istoveten z: EN ISO 105-E07:2010
ICS:
59.080.01 Tekstilije na splošno Textiles in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 105-E07
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2010
ICS 59.080.01 Supersedes EN ISO 105-E07:1997
English Version
Textiles - Tests for colour fastness - Part E07: Colour fastness
to spotting: Water (ISO 105-E07:2010)
Textiles - Essais de solidité des coloris - Partie E07: Textilien - Farbechtheitsprüfungen - Teil E07: Farbechtheit
Solidité des coloris à la goutte d'eau (ISO 105-E07:2010) gegen Flecken: Wasser (ISO 105-E07:2010)
This European Standard was approved by CEN on 22 March 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 105-E07:2010: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 105-E07:2010) has been prepared by Technical Committee ISO/TC 38 "Textiles" in
collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is
held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2010, and conflicting national standards shall be withdrawn at
the latest by October 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 105-E07:1997.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 105-E07:2010 has been approved by CEN as a EN ISO 105-E07:2010 without any
modification.
INTERNATIONAL ISO
STANDARD 105-E07
Fourth edition
2010-04-15
Textiles — Tests for colour fastness —
Part E07:
Colour fastness to spotting: Water
Textiles — Essais de solidité des coloris —
Partie E07: Solidité des coloris à la goutte d'eau

Reference number
ISO 105-E07:2010(E)
©
ISO 2010
ISO 105-E07:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduce
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...