EN ISO 18647:2019
(Main)Petroleum and natural gas industries - Modular drilling rigs for offshore fixed platforms (ISO 18647:2017)
Petroleum and natural gas industries - Modular drilling rigs for offshore fixed platforms (ISO 18647:2017)
ISO 18647:2017 gives requirements for the design, fabrication, installation, commissioning and integrity management of modular drilling rigs on offshore fixed platforms.
The modular drilling rig includes some or all of the equipment as follows:
- drilling equipment including a derrick/mast and its controls that can be moved by skidding a drilling support structure;
- drilling support equipment which includes support facilities such as power supply/distribution system;
- mud and cement storage, mixing, monitoring and control equipment.
ISO 18647:2017 is applicable to the modular drilling equipment on offshore structures for the petroleum and natural gas industries, as follows:
- new equipment arranged in a modularized form;
- the equipment contained in several modules, each of which can be lifted and installed on to the platform, however, the equipment may be arranged within the modules as is convenient;
- the modules assembled together offshore for hook up and commissioning;
- intended for long term use on a new fixed offshore structure;
- Intended for temporary use on a number of different offshore platforms.
ISO 18647:2017 is not applicable to drilling equipment
- installed on mobile offshore units, and
- intended primarily for onshore use.
ISO 18647:2017 does not apply to those parts and functions of an offshore platform that are not directly related to drilling.
Erdöl- und Erdgasindustrie - Modulare Bohranlagen auf offshore verankerten Plattformen (ISO 18647:2017)
Industries du pétrole et du gaz naturel - Spécifications pour une foreuse modulaire à bord de plateformes fixes offshore (ISO 18647:2017)
Industrija za predelavo nafte in zemeljskega plina - Modularne vrtalne ploščadi za priobalne pritrjene ploščadi (ISO 18647:2017)
Standard ISO 18647:2017 določa zahteve za projektiranje, izdelavo, namestitev, obratovanje in upravljanje celovitosti modularnih vrtalnih ploščadi na priobalnih pritrjenih ploščadih.
Modularna vrtalna plošča zajema nekatero ali vso to opremo:
– vrtalna oprema vključno z vrtalnim stolpom/stebrom in nadzornimi elementi, ki jo je mogoče premikati z drsenjem vrtalne podporne konstrukcije;
– vrtalna podporna oprema, ki vključuje podporne sisteme, kot je sistem za dovajanje/distribucijo električne energije;
– oprema za shranjevanje, mešanje, spremljanje ter nadzor blata in cementa.
Standard ISO 18647:2017 se uporablja za modularno vrtalno opremo na priobalnih konstrukcijah za industrijo za predelavo nafte in zemeljskega plina, in sicer za:
– novo opremo, razmeščeno v modularizirani obliki;
– opremo, ki je zajeta v več modulih, od katerih je mogoče vsakega dvigniti in namestiti na ploščad, vendar je mogoče opremo razmestiti znotraj modulov, kot je priročno;
– module, ki se sestavijo priobalno za obešenje in obratovanje;
– opremo, ki je namenjena za dolgotrajno uporabo na novi pritrjeni priobalni konstrukciji;
– opremo, ki je namenjena za začasno uporabo na številnih različnih priobalnih ploščadih.
Standard ISO 18647:2017 se ne uporablja za vrtalno opremo, ki je:
– nameščena na mobilnih priobalnih enotah; in
– namenjena predvsem za kopensko uporabo.
Standard ISO 18647:2017 se ne uporablja za tiste dele in funkcije priobalne ploščadi, ki niso neposredno povezane z vrtanjem.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2019
Industrija za predelavo nafte in zemeljskega plina - Modularne vrtalne ploščadi za
priobalne pritrjene ploščadi (ISO 18647:2017)
Petroleum and natural gas industries - Modular drilling rigs for offshore fixed platforms
(ISO 18647:2017)
Industries du pétrole et du gaz naturel - Spécifications pour une foreuse modulaire à
bord de plateformes fixes offshore (ISO 18647:2017)
Ta slovenski standard je istoveten z: EN ISO 18647:2019
ICS:
75.180.10 Oprema za raziskovanje, Exploratory, drilling and
vrtanje in odkopavanje extraction equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 18647
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2019
EUROPÄISCHE NORM
ICS 75.180.10
English Version
Petroleum and natural gas industries - Modular drilling
rigs for offshore fixed platforms (ISO 18647:2017)
Industries du pétrole et du gaz naturel - Spécifications
pour une foreuse modulaire à bord de plateformes
fixes offshore (ISO 18647:2017)
This European Standard was approved by CEN on 9 September 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18647:2019 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
The text of ISO 18647:2017 has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 18647:2019 by
Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2020, and conflicting national standards shall be
withdrawn at the latest by April 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 18647:2017 has been approved by CEN as EN ISO 18647:2019 without any modification.
INTERNATIONAL ISO
STANDARD 18647
First edition
2017-08
Petroleum and natural gas
industries — Modular drilling rigs for
offshore fixed platforms
Industries du pétrole et du gaz naturel — Spécifications pour une
foreuse modulaire à bord de plateformes fixes offshore
Reference number
ISO 18647:2017(E)
©
ISO 2017
ISO 18647:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
ISO 18647:2017(E)
Contents Page
Foreword .vi
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Abbreviated terms . 4
5 Overall considerations . 6
5.1 General . 6
5.2 Functional equipment . 6
5.2.1 Hoisting system . 6
5.2.2 Rotary system . 6
5.2.3 Circulation and solids control systems . 6
5.2.4 Power and electrical systems . 6
5.2.5 Well control system . 7
5.2.6 BOP handling system . 7
5.2.7 Cementing system . 7
5.2.8 Pipe handling system . 7
5.2.9 Instrument communication system . 7
5.2.10 Auxiliary system . 7
5.3 Layout . 7
5.3.1 General. 7
5.3.2 Drilling equipment set . 8
5.3.3 Drilling support module . 8
5.3.4 Drilling utilities . 8
5.4 Health and safety considerations . 8
5.4.1 General. 8
5.4.2 Escape and alarms . 8
5.4.3 Hazardous areas and storage of hazardous goods . 9
5.4.4 Fire and explosion protection. 9
5.4.5 Safety equipment . 9
5.5 Operational considerations . 9
5.6 Corrosion control . 9
5.7 Structural considerations . 9
5.8 Removal and abandonment .10
6 Design .10
6.1 General .10
6.2 Rig rating .10
6.3 Drilling equipment set .11
6.3.1 General.11
6.3.2 Derrick/Mast .12
6.3.3 Maximum hook load .12
6.3.4 Drill floor clearance .12
6.3.5 Top drive system .12
6.3.6 Well control equipment .12
6.3.7 BOP handling system .12
6.3.8 Circulation and solids control system .13
6.4 Drilling support equipment .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.